Search results
Create the page "Linux" on this wiki! See also the search results found.
Page title matches
- This page contains links to information about Linux kernels, packages and software development for CM-X270 modules. ...system image]] based on Debian Linux. It is possible to use other embedded Linux distributions and environments.3 KB (391 words) - 14:21, 15 December 2009
- #REDIRECT [[CM-X270: Linux: Getting started]]45 bytes (5 words) - 08:01, 23 December 2009
- #REDIRECT [[Linux: Development for ARM modules]]48 bytes (6 words) - 08:10, 23 December 2009
- #REDIRECT [[Linux Development for XScale modules]]50 bytes (6 words) - 11:54, 28 February 2008
- #REDIRECT [[CM-X270: Linux: Kernel]]36 bytes (4 words) - 08:45, 23 December 2009
- #REDIRECT [[CM-X270: Linux: MTD drivers]]41 bytes (5 words) - 08:11, 23 December 2009
- ...on Ubuntu 9.10. [http://www.compulab.co.il/iam/download/iam-linux.zip The Linux package for CM-iAM] includes a ready-to-run NAND flash image and kernel sou * A tftpd package for your distribution on a Linux-based host. For example tftpd-hpa on Ubuntu.5 KB (673 words) - 16:27, 23 June 2010
- ...is available in [http://www.compulab.co.il/iam/download/iam-linux.zip The Linux package for CM-iAM] under the ''kernel'' directory. The configuration file ...ch {{filename|arch/x86/kernel/reboot.c}}. The patch is present in official Linux sources starting from the 2.6.31 version.30 KB (1,545 words) - 11:53, 13 May 2010
- This page contains links to information about Linux kernels, packages and software development for CM-A510 modules. ...ian.org/ports/arm/ ARM Debian Linux]. It is possible to use other embedded Linux distributions and environments.2 KB (222 words) - 13:03, 31 August 2015
- ...d drive. The NFS method is recommended because NFS setup will ease further Linux evaluation and development.}} * Download the [http://www.compulab.co.il/a510/download/a510-linux.zip Linux distribution package for CM-A510] from CompuLab's website . Unzip the packa6 KB (984 words) - 07:40, 26 August 2015
- #REDIRECT [[EM-X270: Linux: Getting started]]45 bytes (5 words) - 08:04, 23 December 2009
- This page contains links to information about Linux kernels, packages and software development for EM-X270 device. * [[Getting started with Linux on EM-X270]]1 KB (167 words) - 14:23, 15 December 2009
- This page contains links to information about Linux kernels, packages and software development for CM-iGLX modules. * [[Getting started with Linux on CM-iGLX]]871 bytes (115 words) - 14:46, 15 December 2009
- #REDIRECT [[CM-iGLX: Linux: Gentoo]]36 bytes (4 words) - 07:59, 23 December 2009
- ...4-34-fitpc2 linux-image-2.6.24-34-fitpc2 linux-kernel-devel linux-libc-dev linux-source ...pt-get purge linux-image-2.6.24-24-generic linux-headers-2.6.24-24-generic linux-headers-2.6.24-243 KB (488 words) - 08:15, 23 December 2009
- #REDIRECT [[CM-iGLX: Linux: Getting started]]45 bytes (5 words) - 08:03, 23 December 2009
- #REDIRECT [[EM-X270: Linux: Angstrom]]38 bytes (4 words) - 15:41, 22 December 2009
- #REDIRECT [[Getting started with Linux on CM-X270]]51 bytes (7 words) - 15:04, 10 March 2008
- The Linux file system for CompuLab CM-X270 module is based on Debian GNU/Linux 4.0 (etch) distribution and includes the following components: * Various Linux utilities (basic Debian set of utilities from debootstrap)11 KB (1,636 words) - 09:12, 23 November 2008
- #REDIRECT [[Gentoo Linux for CM-iGLX]]38 bytes (5 words) - 15:06, 10 March 2008
- #REDIRECT [[Angstrom Linux for EM-X270]]40 bytes (5 words) - 15:07, 10 March 2008
- #REDIRECT [[CM-X270: Linux: Kernel]]36 bytes (4 words) - 06:25, 15 October 2017
- #REDIRECT [[CM-iGLX: Linux: Getting started]]45 bytes (5 words) - 08:10, 23 December 2009
- #REDIRECT [[Getting started with Linux on EM-X270]]51 bytes (7 words) - 15:09, 10 March 2008
- 23 bytes (3 words) - 15:27, 12 October 2015
- The Linux kernel for CM-T3530 may be built with support for very low power sleep mode ...se {{filename|cm_t35_pm_defconfig}} kernel configuration file to build the Linux kernel with enabled power management features.}}2 KB (283 words) - 08:38, 17 August 2010
- The run-time demo Angstrom Linux filesystem including the video modules was created using OpenEmbedded frame If the CM-T3530 Linux kernel image is built outside the OpenEmbedded framework, the pre-built DSP8 KB (1,091 words) - 13:05, 10 July 2011
- ...installed as described in [[Linux_Development_for_XScale_modules#MTD_utils|Linux Development for XScale modules]] article. * [[Linux_Development_for_XScale_modules|Linux Development for XScale modules]]5 KB (542 words) - 15:24, 22 September 2013
- ...Linux kernels support most of SBC-FITPC2 hardware features. Starting with Linux kernel 2.6.32 SBC-FITPC2 support is merged into the mainline. == Patches for Linux kernel earlier than 2.6.32 ==27 KB (1,242 words) - 08:44, 23 December 2009
- #REDIRECT [[CM-X270: Linux: Debian]]36 bytes (4 words) - 15:56, 22 December 2009
- #REDIRECT [[CM-X300: Linux: Debian]]36 bytes (4 words) - 15:51, 22 December 2009
- ...evaluation and development process. The Exeda users are free to choose the Linux flavor that suits best their specific application requirements. This page includes description of the package structure, Linux installation procedure and peripheral device options specific to Exeda.14 KB (1,572 words) - 08:44, 23 December 2009
- This page contains links to information about Linux kernels, packages and software development for CM-X300 modules. ...file system image]] based on [http://www.debian.org/ports/arm/ ARM Debian Linux].2 KB (330 words) - 13:57, 29 September 2013
- #REDIRECT [[CM-X300: Linux: Getting started]]45 bytes (5 words) - 08:02, 23 December 2009
- #REDIRECT [[CM-X300: Linux: Kernel]]36 bytes (4 words) - 08:45, 23 December 2009
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-X300 modules. == Building Linux kernel for CM-X300 ==8 KB (843 words) - 13:43, 29 September 2013
- This page contains links to information about Linux kernels, packages and software development for Exeda device. * [[Linux kernel for Exeda]]437 bytes (57 words) - 14:24, 15 December 2009
- #REDIRECT [[Exeda: Linux: Kernel]]34 bytes (4 words) - 08:44, 23 December 2009
- ...CompuLab Linux package for CM-X300 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi The default Debian Sid Linux image includes more than 400 software packages. Among them:7 KB (1,140 words) - 13:47, 29 September 2013
- ...h drive. The first method is preferred because NFS setup will ease further Linux evaluation and development.}} ...in the [http://compulab.co.il/products/computer-on-modules/cm-x300/#devres Linux package for CM-X300].6 KB (903 words) - 10:58, 5 May 2014
- The Linux file system for CompuLab CM-X270 module is based on Debian GNU/Linux 4.0 (etch) distribution and includes the following components: * Various Linux utilities (basic Debian set of utilities from debootstrap)11 KB (1,639 words) - 15:44, 19 August 2012
- #REDIRECT [[SBC-FITPC2: Linux: Kernel]]39 bytes (4 words) - 08:44, 23 December 2009
- ...rom [http://www.compulab.co.il/products/handheld-computers/em-x270/#devres Linux package for EM-X270] onto USB flash drive formatted with FAT filesystem. * Next environment settings are passed to Linux Kernel and are needed for NFS root:5 KB (732 words) - 08:38, 23 October 2016
- ...ompuLab Linux package for EM-X270] includes ready to run NAND flash image, Linux kernel configuration and source code patches, and OpenEmbedded configuration files used to build the Angstrom Linux image. The package also features LiveDisk image for easy installation of t12 KB (1,743 words) - 15:15, 30 October 2010
- ...l-api.org/docs/online/2.6.17/da/dfa/linux_2spi_2spi_8h-source.html include/linux/spi/spi.h]. * [[Getting started with Linux on CM-X270]]9 KB (1,317 words) - 08:12, 23 December 2009
- ...tionality can be enabled in using [http://v4l2spec.bytesex.org/ "Video for Linux 2 (v4l2)" API]. CompuLab provides [http://www.compulab.co.il/mediawiki/files/Linux/iglx/geodelx-v4l2.tar.gz geodelx-v4l2 package] which contains a driver that18 KB (1,053 words) - 08:13, 23 December 2009
- # Copy the contents of this Linux package’s ZIP file to the {{filename|C:\LIN_INST\}} folder on your PC. Un # Reboot and enjoy Linux on the CM-iGLX.5 KB (794 words) - 08:03, 23 December 2009
- This page contains links to information about Linux kernel, packages and software development for SBC-FITPC2 modules. ...nux Kernel for SBC-FITPC2|Linux kernel]]. It should be possible to use any Linux distribution with SBC-FITPC2, although certain features may require custom612 bytes (77 words) - 14:26, 15 December 2009
- #REDIRECT [[CM-iAM: Linux: Getting started]]44 bytes (5 words) - 08:03, 23 December 2009
- #REDIRECT [[CM-iAM: Linux: Kernel]]35 bytes (4 words) - 08:45, 23 December 2009
- ...s, frameworks and utilities. All these has to be cross-compiled also. Most Linux and Open Source software projects use a {{cmd|1=configure}} script to confi ...okylinux.org/ Poky Linux], and [http://www.denx.de/wiki/DULG/ELDK Embedded Linux Development Kit].24 KB (2,956 words) - 09:11, 16 August 2012
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-X270 modules. == Building Linux kernel for CM-X270 ==10 KB (1,216 words) - 07:39, 20 August 2012
- == Linux MTD drivers for NAND flash on CM-X270 == Linux kernel BSP for CM-X270 includes8 KB (1,219 words) - 15:46, 19 August 2012
- ...e guidelines for image modification, and even creation of your own Gentoo Linux for CM-iGLX. The Linux image we provide is made as generic as possible. It includes more then 20020 KB (3,094 words) - 08:00, 23 December 2009
- #REDIRECT [[CM-iAM: Linux: Ubuntu]]35 bytes (4 words) - 06:21, 15 October 2017
- ...standard Linux JFFS2 format. The image can be loaded into the CM-X270 from Linux '''only'''. For convenience of the installation we provide small ramdisk im ...d the [http://compulab.co.il/wp-content/uploads/2011/09/x270-linux-img.zip Linux distribution package for CM-X270] from CompuLab's website . Unzip the packa10 KB (1,560 words) - 15:30, 19 August 2012
- This page contains links to information about the Linux kernel, packages and software development for CM-iAM modules. ...ple file system image]] based on Ubuntu Linux. It is possible to use other Linux distributions and environments.764 bytes (106 words) - 10:14, 6 May 2010
- Linux kernel for CM-T3530 modules provides support for on-board peripherals and a ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3530 modules.5 KB (758 words) - 13:07, 28 October 2013
- == Angstrom Linux images == ...framework. The OpenEmbedded framework can also be used for building custom Linux images.10 KB (1,404 words) - 12:13, 28 October 2013
- #REDIRECT [[CM-iAM: Linux: Ubuntu]]35 bytes (4 words) - 17:20, 4 November 2014
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T3530 (link below). * Download the Linux package for CM-T3530 from [http://compulab.co.il/products/computer-on-modul14 KB (2,180 words) - 13:33, 28 October 2013
- ...example run-time Linux filesystem image for CM-T3530 is based on Angstrom Linux 2010. ...ckage for CM-T3530] includes ready to run Angstrom Linux filesystem image, Linux kernel and source code patches.11 KB (1,627 words) - 05:51, 29 October 2013
- This page contains links to information about Linux kernels, packages and software development for CM-T3530 modules. ...rom-distribution.org Angstrom Linux]. It is possible to use other embedded Linux distributions and environments with CM-T3530. The CM-T3530 platform is supp2 KB (346 words) - 11:30, 28 October 2013
- [[Category:Linux|Known issues]] [[Category:CM-T3530|Linux: Known issues]]786 bytes (115 words) - 11:49, 28 October 2013
- === Linux === Detailed description how use Linux {{cmd|fdisk}} utility to adjust MMC/SD card partition table to suit OMAP3x4 KB (624 words) - 14:18, 9 January 2013
- #REDIRECT [[Linux: Development for ARM modules]]48 bytes (6 words) - 08:09, 23 December 2009
- ...ystem packages include archive of basic Debian system created with [http://linux.die.net/man/8/debootstrap debootsrap]. * Use [http://linux.die.net/man/8/apt-get apt-get] package handling utility to install required4 KB (576 words) - 07:01, 1 June 2010
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-A510 modules. The CM-A510 Linux kernel is shipped with built-in command line parameters:6 KB (854 words) - 13:15, 31 August 2015
- ...D flash image, archive of the root filesystem used to create the image and Linux kernel configuration and source code patches. The default Debian Sid Linux image takes approximately 170 megabytes of flash space, and includes more t5 KB (709 words) - 16:05, 13 December 2011
- #REDIRECT [[CM-T3x: Linux: Booting from MMC/SD card]]53 bytes (9 words) - 07:20, 31 January 2011
- This page contains links to information about the Linux packages and software development for CM-iTC modules. CompuLab Linux support for the CM-iTC includes:1 KB (176 words) - 15:21, 19 March 2013
- * The Linux Package for CM-iTC includes a ready-to-run image that can be installed on S ...zip the [http://compulab.co.il/products/computer-on-modules/cm-itc/#devres Linux Package] for CM-iTC to the host PC1 KB (181 words) - 14:01, 18 March 2013
- * The Linux distribution on CM-iTC is Linux Mint 13 LTS with full-featured MATE desktop environment. ...Note|The EMGD drivers in their current state are not included in any major Linux distribution yet. There are still a few technical and compatibility issues8 KB (1,295 words) - 15:20, 19 March 2013
- * linux_3.2.0.orig.tar.gz - mainline Linux 3.2.0 sources $ cd /path/to/itc-linux/kernel/linux-3.22 KB (275 words) - 14:05, 18 March 2013
- CM-T3730 Linux supports various camera devices connected either to the USB subsystem or to Linux USB camera support is provided by USB Video Class (UVC) driver. All UVC com63 KB (6,998 words) - 11:43, 16 February 2014
- ...{{cmd|gplay}} tool or the Gstreamer pipeline as described in the [[CM-FX6: Linux: Debian#Video Playback|Video Playback]] article. [[Category:Linux|Known issues]]796 bytes (107 words) - 11:46, 5 February 2017
- ...mpuLab CM-FX6 System-on-Module / Computer-on-Module is based on Debian GNU/Linux Stretch. ...CompuLab Linux package for CM-FX6 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi36 KB (5,110 words) - 09:06, 5 February 2017
- This page contains links to information about the Linux packages and software development for CM-iGT modules. CompuLab Linux support for the CM-iGT includes:1 KB (174 words) - 13:06, 29 October 2015
- * The Linux package for CM-iGT includes a ready-to-run image that can be installed on S ...oad the [http://compulab.co.il/products/computer-on-modules/cm-igt/#devres Linux Package] for CM-iGT to the host PC and ensure the integrity of the file:2 KB (326 words) - 13:07, 29 October 2015
- * Linux on CM-iGT is Linux Mint 17 LTS with full-featured MATE desktop environment * Watchdog is already installed and configured on the Linux image provided by CompuLab5 KB (746 words) - 13:42, 29 October 2015
- * linux_3.16.0.orig.tar.gz - mainline Linux 3.16.0 sources The kernel can be recompiled with necessary changes as described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]809 bytes (111 words) - 13:31, 29 October 2015
- [[Category:Linux|Known issues]] [[Category:CM-iGT|Linux: Known issues]]196 bytes (23 words) - 14:47, 13 July 2014
- * Obtain a Linux PC workstation (host). ...nux: Kernel#Getting_Fastboot|Getting Fastboot]] section of the [[CM-QS600: Linux: Kernel]] article.7 KB (1,033 words) - 13:23, 3 January 2016
- #REDIRECT [[CM-FX6 Freescale i.MX6 Linux]]42 bytes (6 words) - 11:41, 29 December 2016
- Ubuntu Linux for the CM-iAM is based on standard Ubuntu 9.10 Karmic Koala. The run-time * Described in more detail on the [[Linux Kernel for CM-iAM|Linux kernel for CM-iAM]] page.7 KB (1,134 words) - 17:20, 4 November 2014
- This page contains links to information about Linux kernels, packages and software development for CM-T3517 modules. ...rg/ports/arm/ ARM Debian Linux]. It is also possible to use other embedded Linux distributions and environments with CM-T3517.2 KB (312 words) - 14:01, 15 January 2013
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T3517 (link below). * Download the Linux package for CM-T3517 from [http://compulab.co.il/products/computer-on-modul11 KB (1,677 words) - 10:31, 9 March 2013
- ...ompuLab Linux package for CM-T3517 includes ready to run NAND flash image, Linux kernel configuration and source code patches and an archive of the root fil The default Debian Sid Linux image includes more than 400 software packages. Among them:25 KB (3,551 words) - 11:09, 25 February 2014
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3517 modules. The Linux kernel for CM-T3517 is shipped with built-in command line parameters:39 KB (2,150 words) - 13:02, 11 March 2013
- [[Category:Linux|Known issues]] [[Category:CM-T3517|Linux: Known issues]]484 bytes (59 words) - 09:26, 10 January 2013
- Image Name: Linux-2.6.32.21+drm33.7-00068-g2 Image Type: ARM Linux Kernel Image (uncompressed)9 KB (1,057 words) - 06:31, 27 January 2011
- This page contains links to information about Linux kernels, packages and software development for CM-T3730 modules. ...bian.org/ports/arm/ ARM Debian] port. It is possible to use other embedded Linux distributions and environments with CM-T3730.4 KB (616 words) - 08:13, 18 February 2014
- ...ckage for CM-T3730] includes ready to run Angstrom Linux filesystem image, Linux kernel and source code patches. The default Angstrom Linux image includes more than 1000 software packages. Among them:20 KB (2,914 words) - 08:27, 18 February 2014
- CM-T3730 Linux package supplied with Angstrom and Debian example root filesystem images. This article provides an introduction on how to install the Angstrom Linux image on CM-T3730.15 KB (2,271 words) - 12:36, 16 February 2014
- Linux kernel for CM-T3730 modules provides support for on-board peripherals and a ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3730 modules.5 KB (749 words) - 09:39, 29 July 2013
- [[Category:Linux|Known issues]] [[Category:CM-T3730|Linux: Known issues]]1 KB (227 words) - 08:20, 18 February 2014
- == Angstrom Linux images == ...framework. The OpenEmbedded framework can also be used for building custom Linux images.14 KB (2,029 words) - 09:42, 29 July 2013
- ...mentation of CAN protocols for Linux. It uses the Berkeley socket API, the Linux network stack and implements the CAN device drivers as network interfaces. ...e well maintained sources of CAN utils available at [https://gitorious.org/linux-can Gitorious] and3 KB (483 words) - 11:06, 8 January 2013
- CM-T3730 Linux package supports DaVinci Multimedia Application Interface (DMAI). == Boot Loader and Linux Kernel ==15 KB (2,001 words) - 11:45, 16 February 2014
- 147 bytes (25 words) - 08:49, 18 February 2013
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-FX6 (link below). * Download the Linux package for CM-FX6 from [http://compulab.co.il/products/computer-on-modules15 KB (2,354 words) - 13:22, 1 January 2017
- The Linux kernel for the CompuLab CM-FX6 System-on-Module / Computer-on-Module provid ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-FX6 modules.107 KB (3,846 words) - 10:10, 5 January 2017
- [[Category:Linux|Known issues]] [[Category:CM-iTC|Linux: Known issues]]278 bytes (36 words) - 07:52, 20 March 2013
- #REDIRECT [[CM-T335 TI AM335x Linux]]37 bytes (6 words) - 13:06, 7 July 2015
- * Linux kernel images. ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T335 (link below).10 KB (1,529 words) - 17:58, 25 October 2016
- [[Category:Linux]]644 bytes (86 words) - 17:18, 15 September 2016
- ...b CM-T335 System-on-Module / Computer-on-Module is based on Debian 8.2 GNU/Linux Jessie (armhf). ...CompuLab Linux package for CM-T335 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi25 KB (3,362 words) - 06:32, 25 January 2017
- Linux kernel for the CompuLab CM-T335 System-on-Module / Computer-on-Module provi ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T335 modules.31 KB (1,794 words) - 17:14, 15 September 2016
- The Graphics SDK version 4.10.00.01 includes the Linux graphics (SGX) drivers, OpenGLES1.1, OpenGLES2.0 and OpenVG demos for all T The CM-T335 Linux package contains pre-built graphics kernel modules and graphics demo applic2 KB (301 words) - 12:24, 14 September 2016
- ...xample run-time Linux filesystem image for CM-T3730 is based on Debian GNU/Linux Wheezy. ...ompuLab Linux package for CM-T3730 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi24 KB (3,554 words) - 11:11, 25 February 2014
- = CM-T3730 Linux package contents = * {{filename|uImage-cm-t3730}} - ready to run Linux kernel image binary for CM-T37305 KB (704 words) - 09:09, 18 February 2014
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-T54 System-o ...bian.org/ports/arm/ ARM Debian] port. It is possible to use other embedded Linux distributions and environments with CM-T54.3 KB (397 words) - 11:44, 18 June 2015
- Linux kernel for the CompuLab CM-T54 System-on-Module / Computer-on-Module provid ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T54 modules.8 KB (1,163 words) - 04:40, 19 October 2016
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T54 (link below). * Download the Linux package for CM-T54 from [http://compulab.co.il/products/computer-on-modules15 KB (2,246 words) - 13:44, 18 June 2015
- ...mpuLab CM-T54 System-on-Module / Computer-on-Module is based on Debian GNU/Linux Wheezy. ...nux package for CM-T54 includes ready to run root filesystem demo archive, Linux kernel configuration and source code patches.19 KB (2,716 words) - 10:04, 18 June 2015
- #REDIRECT [[CM-QS600 Qualcomm Snapdragon 600 APQ8064 Linux]]60 bytes (6 words) - 12:24, 6 July 2015
- ...on-Module / Computer-on-Module Linux kernel is based on the Snapdragon 600 Linux Platform Ubuntu-based [http://releases.linaro.org/14.09/ubuntu/ifc6410 14.0 ...xample run-time Linux filesystem image for CM-QS600 is based on Debian GNU/Linux Wheezy.14 KB (1,951 words) - 12:41, 9 November 2015
- Linux kernel for the CompuLab CM-QS600 System-on-Module / Computer-on-Module prov ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-QS600 modules.36 KB (2,292 words) - 12:42, 9 November 2015
- [[Category:Linux|Known issues]] [[Category:CM-T54|Linux: Known issues]]680 bytes (95 words) - 11:50, 18 June 2015
- --2015-06-18 10:49:48-- http://www.linux-usb.org/usb.ids Resolving www.linux-usb.org (www.linux-usb.org)... 216.34.181.974 KB (601 words) - 14:11, 24 December 2015
- #REDIRECT [[CM-T43 TI AM437x Linux]]36 bytes (6 words) - 17:04, 6 July 2015
- [[Category:Linux]]831 bytes (91 words) - 08:27, 29 June 2016
- #REDIRECT [[CM-T43: Linux: Manual Installation]]48 bytes (5 words) - 11:23, 29 June 2016
- ...mpuLab CM-T43 System-on-Module / Computer-on-Module is based on Debian GNU/Linux Jessie. ...udes ready to run Linux kernel binary, root filesystem demo image archive, Linux kernel configuration and source code patches.18 KB (2,611 words) - 12:33, 29 June 2016
- Linux kernel for the CompuLab CM-T43 System-on-Module / Computer-on-Module provid ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T43 modules.61 KB (3,274 words) - 11:27, 29 June 2016
- ...Lab CM-T54 System-on-Module / Computer-on-Module is based on Arago Project Linux filesystem for OMAP-5432-uEVM evaluation board from TI, distributed with th ...tarted]] page provides a brief introduction on how to install the run-time Linux image.15 KB (2,053 words) - 12:27, 18 June 2015
- * {{filename|zImage-cm-t54}} - ready to run Linux kernel image binary for CM-T54 * {{filename|zImage-3.8.13-cm-t54-5.bin}} - ready to run Linux kernel version 3.8.13-cm-t54-5 for CM-T543 KB (434 words) - 13:06, 18 June 2015
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-T43 System-o ...bian.org/ports/arm/ ARM Debian] port. It is possible to use other embedded Linux distributions and environments with CM-T43.3 KB (411 words) - 06:31, 24 August 2017
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-T335 System- ...le file system image based on [http://www.debian.org/ports/arm/ ARM Debian Linux].4 KB (602 words) - 06:32, 24 August 2017
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-QS600 System ...file system image]] based on [http://www.debian.org/ports/arm/ ARM Debian Linux].3 KB (423 words) - 14:44, 25 December 2015
- = CM-A510 Linux package contents = * {{filename|uImage-cm-a510}} - ready to run Linux kernel image binary for CM-A5102 KB (271 words) - 06:37, 26 August 2015
- * The Linux package for COMEX-IE38 includes a ready-to-run image that can be installed ...the [http://compulab.co.il/products/computer-on-modules/comex-ie38/#devres Linux Package] for COMEX-IE38 to the host PC and ensure the integrity of the file2 KB (370 words) - 16:19, 31 August 2015
- ...X-IE38 is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-IE38 capabilities, support for the C1 KB (151 words) - 10:12, 8 September 2015
- * COMEX-IE38 supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-IE38: Linux: Getting started|Getting started with Linux on COMEX-IE38]]868 bytes (109 words) - 16:20, 31 August 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]751 bytes (98 words) - 16:17, 31 August 2015
- ...aced here [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic linux-image-3.16.0-38-generic] * linux_x.y.z.orig.tar.gz - mainline Linux x.y.z sources3 KB (412 words) - 14:48, 31 August 2015
- #REDIRECT [[COMEX-IE38 Intel BayTrail COM Express Linux]]57 bytes (7 words) - 16:08, 31 August 2015
- ...-IC50L is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-IC50L capabilities, support for the1 KB (165 words) - 12:43, 10 September 2015
- * The Linux package for COMEX-IC50L includes a ready-to-run image that can be installed ...he [http://compulab.co.il/products/computer-on-modules/comex-ic50l/#devres Linux Package] for COMEX-IC50L to the host PC and ensure the integrity of the fil1 KB (240 words) - 12:50, 10 September 2015
- * COMEX-IC50L supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-IC50L: Linux: Getting started|Getting started with Linux on COMEX-IC50L]]878 bytes (117 words) - 09:22, 10 September 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]759 bytes (105 words) - 09:32, 8 September 2015
- ...-IC40D is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-IC40D capabilities, support for the1 KB (165 words) - 12:49, 10 September 2015
- * The Linux package for COMEX-IC40D includes a ready-to-run image that can be installed ...he [http://compulab.co.il/products/computer-on-modules/comex-ic40d/#devres Linux Package] for COMEX-IC40D to the host PC and ensure the integrity of the fil1 KB (239 words) - 12:50, 10 September 2015
- * COMEX-IC40D supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-IC40D: Linux: Getting started|Getting started with Linux on COMEX-IC40D]]994 bytes (129 words) - 09:21, 10 September 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]757 bytes (105 words) - 08:06, 8 September 2015
- ...X-A420 is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-A420 capabilities, support for the C1 KB (151 words) - 06:38, 10 September 2015
- * The Linux package for COMEX-A420 includes a ready-to-run image that can be installed ...the [http://compulab.co.il/products/computer-on-modules/comex-a420/#devres Linux Package] for COMEX-A420 to the host PC and ensure the integrity of the file1 KB (226 words) - 06:48, 10 September 2015
- * COMEX-A420 supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-A420: Linux: Getting started|Getting started with Linux on COMEX-A420]]868 bytes (109 words) - 12:54, 10 September 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]749 bytes (98 words) - 06:21, 10 September 2015
- embedded Linux development. To get the Yocto Project expected behavior in a Linux Host Machine, the packages and utilities described below must be installed.14 KB (2,167 words) - 07:24, 14 June 2016
- | align="" |Linux | align="" |Linux21 KB (2,992 words) - 14:30, 30 August 2023
- |<!--*[[IOT-GATE-RPI4: Linux: Production Deployment|Production Image Deployment]] --> ::- Linux Kernel 5.15.612 KB (295 words) - 16:44, 23 November 2022
- #REDIRECT [[IOT-GATE-IMX8PLUS Yocto Linux]] This page contains links to information about Yocto Linux distribution for the Compulab IOT-GATE-IMX8PLUS Internet of Things Gateway3 KB (380 words) - 09:47, 3 September 2023
- This article provides instructions needed to install the Yocto Linux live image onto the Compulab IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS internal ...the host PC. From now we assume the device name of the flash drive on your Linux PC is {{filename|/dev/sdX}}.5 KB (397 words) - 15:53, 31 August 2023
- ...ded with comprehensive documentation and full ready-to-run support for the Linux operating system.</br> * [[UCM-iMX8M-Plus: Yocto Linux: Manual Installation: SD card|Installing Yocto on SD card]]6 KB (779 words) - 12:19, 19 February 2024
- ...uctions needed to install the Yocto Linux SD-card image on SD card using a Linux Host workstation. The image provides full boot system including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (328 words) - 14:25, 7 March 2024
- Please use the `CompuLab Deployment Tool` to install UCM-iMX8M-Plus Yocto Linux onto on-board eMMC storage. ...ux:_Manual_Installation:_SD_card#Run%20Yocto%20Linux%20image|Run the Yocto Linux image]] that you intend to deploy.2 KB (234 words) - 10:38, 30 May 2021
- #REDIRECT [[IOT-GATE-IMX8PLUS Debian Linux]] This page contains links to information about Linux kernels, packages and software development for the Compulab IOT-GATE-IMX8PL4 KB (547 words) - 09:47, 3 September 2023
- ...T-IMX8PLUS Internet of Things Single Board Computer is based on Debian GNU/Linux Bullseye. The default Debian buster Linux image includes more than 650 software packages. Among them:32 KB (4,280 words) - 10:48, 6 March 2024
- 239 bytes (36 words) - 07:12, 17 July 2023
- This article provides instructions needed to install the Debian Linux live image onto the Compulab IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS internal ...E-IMX8PLUS and SBC-IOT-IMX8PLUS: Debian Linux: Preparing Live Media|Debian Linux Live Media]]7 KB (309 words) - 10:44, 6 March 2024
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...sp-imx8mp/blob/ucm-imx8m-plus-r3.0/README.md Building UCM-iMX8M-Plus Yocto Linux images].642 bytes (89 words) - 12:20, 19 February 2024
- #REDIRECT [[UCM-iMX8M-Plus NXP iMX8M-Plus Linux Resources]]59 bytes (8 words) - 14:33, 30 August 2023
- * Linux kernel images. ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T335 (link below).12 KB (1,752 words) - 11:10, 11 August 2022
- The example run-time Yocto Linux image for the CompuLab IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS was generated #* In most Linux PCs, the serial port will be denoted as one of the following (where n is a26 KB (3,385 words) - 13:20, 3 September 2023
- ucm-imx8m-plus_yocto-linux ...c.bz2}} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system2 KB (226 words) - 11:22, 23 February 2023
- ::* Wait for Linux prompt ...to set device tree that supports analog audio codec and start booting into Linux:1 KB (177 words) - 11:22, 23 February 2023
- ...ded with comprehensive documentation and full ready-to-run support for the Linux operating system.</br> * [[CL-SOM-iMX8Plus: Yocto Linux: Manual Installation: SD card|Installing Yocto on SD card]]5 KB (685 words) - 10:24, 30 August 2023
- ...uctions needed to install the Yocto Linux SD-card image on SD card using a Linux Host workstation. The image provides full boot system including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (281 words) - 12:57, 29 December 2022
- som-imx8m-plus_yocto-linux ...}} - SD card image that provides the full system to boot with U-Boot D2D4, Linux kernel and Yocto file-system4 KB (539 words) - 08:22, 16 July 2023
- Please use the `CompuLab Deployment Tool` to install SOM-iMX8M-Plus Yocto Linux onto on-board eMMC storage. ...a bootable SD card and use it to boot the system [[CL-SOM-iMX8Plus: Yocto Linux: Manual Installation: SD card|as described here]].2 KB (234 words) - 13:04, 31 March 2022
- | align="" |Linux | align="" |Linux23 KB (3,278 words) - 10:30, 30 August 2023
- Kernel release : Linux 4.14.98-cl-som-imx7-6.3 * The installation script performs all necessary steps including installing Linux images onto the on-board storage device (eMMC) and setting up the boot envi2 KB (218 words) - 20:06, 23 April 2020
- This article provides an installation guide for Linux kernel and Debian root file system on the CompuLab CL-SOM-iMX7 System-on-Mo {{:Transclusion: CL-SOM-iMX7: Linux: Automatic Installation: Procedure}}3 KB (368 words) - 08:55, 16 February 2020
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CL-SOM-iMX7 Sys ...file system image]] based on [http://www.debian.org/ports/arm/ ARM Debian Linux].7 KB (897 words) - 11:18, 10 May 2020
- This article provides an introduction on how to install the Linux kernel and the example root filesystem image on the CompuLab CL-SOM-iMX7 Sy {{:Transclusion: CL-SOM-iMX7: Linux: Manual Installation: Preparation}}3 KB (357 words) - 10:02, 29 November 2018
- This article provides an introduction on how to install the Linux kernel and the example root filesystem image on the CompuLab CL-SOM-iMX7 Sy {{:Transclusion: CL-SOM-iMX7: Linux: Manual Installation: Preparation}}3 KB (476 words) - 11:00, 10 October 2022
- ...7 System-on-Module / Computer-on-Module onto removable micro SD card using Linux host machine. * Obtain a Linux PC workstation with a USB port.2 KB (259 words) - 11:03, 29 November 2018
- The CL-SOM-iMX7 Linux kernel provides support for on-board peripherals/interfaces of the CL-SOM-i ...mx7-bsp-src/}} template for this location. Please use the real path to the Linux package instead.9 KB (1,179 words) - 13:20, 25 April 2023
- ...rovides instructions on how to create the CL-SOM-iMX7 Live SD-card using a Linux host workstation. The Live SD card contains a complete boot stack including U-Boot, Linux kernel, device driver modules and root filesystem.2 KB (275 words) - 11:00, 10 October 2022
- ...b CL-SOM-iMX7 System-on-Module / Computer-on-Module is based on Debian GNU/Linux stretch. The CompuLab Linux package for CL-SOM-iMX7 includes ready to run image, Linux kernel configuration and source code patches, and an archive of the root fi6 KB (761 words) - 13:32, 6 July 2022
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CL-SOM-iMX7 (link below).705 bytes (103 words) - 13:22, 6 December 2018
- This page contains links to information about Linux kernels, packages and software development for the Compulab IOT-GATE-iMX7 I ...file system image]] based on [http://www.debian.org/ports/arm/ ARM Debian Linux].6 KB (735 words) - 11:18, 10 May 2020
- This article provides an installation guide for Linux kernel and Debian root file system onto the IOT-GATE-iMX7 IoT Gateway and S {{:Transclusion: CL-SOM-iMX7: Linux: Automatic Installation: Procedure}}2 KB (292 words) - 13:41, 6 December 2018
- This article provides an introduction on how to install the Linux kernel and the example root filesystem image on the IOT-GATE-iMX7 Internet {{:Transclusion: IOT-GATE-iMX7 and SBC-IOT-iMX7: Linux: Manual Installation: Preparation}}4 KB (509 words) - 10:52, 29 November 2018
- ...nternet of Things Single Board Computer onto removable micro SD card using Linux host machine. * Obtain a Linux PC workstation with a USB port.2 KB (290 words) - 11:03, 29 November 2018
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package (link below) under the {{filename|utilities}} subdirectory.1 KB (164 words) - 09:06, 29 November 2018
- This article provides an introduction on how to install the Linux kernel and the example root filesystem image on the IOT-GATE-iMX7 Internet {{:Transclusion: IOT-GATE-iMX7 and SBC-IOT-iMX7: Linux: Manual Installation: Preparation}}3 KB (420 words) - 09:29, 29 November 2018
- ...C-IOT-iMX7 Internet of Things Single Board Computer is based on Debian GNU/Linux stretch. ...ux package for IOT-GATE-iMX7 and SBC-IOT-iMX7 includes ready to run image, Linux kernel configuration and source code patches, and an archive of the root fi7 KB (921 words) - 13:31, 6 July 2022
- This section provides an introduction on how to install the Linux kernel and the example root filesystem image on the CompuLab CL-SOM-iMX7 Sy * [[CL-SOM-iMX7: Linux: Manual Installation: Source: SD|SD card]]1 KB (152 words) - 12:50, 6 December 2018
- This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX7 System-on-Module / Computer-on-Mo The Yocto Project is an open-source collaboration focused on embedded Linux development.4 KB (561 words) - 13:21, 25 April 2023
- ...the CompuLab CL-SOM-iMX7 System-on-Module Yocto Linux Live SD-card using a Linux host workstation. The Live SD card contains a complete boot stack, including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (290 words) - 14:18, 16 January 2019
- cl-som-imx7-yocto-linux/ ...d.bz2}} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system2 KB (252 words) - 14:16, 16 January 2019
- The example run-time Yocto Linux filesystem image for the CompuLab CL-SOM-iMX7 System-on-Module / Computer-o [[CL-SOM-iMX7: Yocto Linux: Creating Live-SD card|Creating Live SD-card]] article provides a brief int908 bytes (111 words) - 14:37, 23 January 2019
- == Using Yocto Linux == ...almost the same as in the [[CL-SOM-iMX7: Linux: Debian#Networking |Debian Linux image]].3 KB (437 words) - 14:31, 4 November 2019
- {{:Transclusion: CL-SOM-iMX7: Yocto Linux: Building}} * [[CL-SOM-iMX7: Yocto Linux: Creating Live-SD card|Creating a Live-SD card]]475 bytes (53 words) - 14:39, 23 January 2019
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...and other Compulab i.MX based machines and contains recipes for U-boot and Linux kernel.3 KB (421 words) - 09:48, 27 January 2019
- This page contains links to information about Yocto Linux distribution for the IOT-GATE-iMX7 Internet of Things Gateway and CompuLab The Yocto Project is an open-source collaboration focused on embedded Linux development.3 KB (417 words) - 11:17, 27 January 2019
- ...ay and SBC-IOT-iMX7 Single Board Computer Yocto Linux Live SD-card using a Linux host workstation. The Live SD card contains a complete boot stack, including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (334 words) - 14:18, 16 January 2019
- The example run-time Yocto Linux filesystem image for the IOT-GATE-iMX7 IoT Gateway and SBC-IOT-iMX7 Single [[IOT-GATE-iMX7 and SBC-IOT-iMX7: Yocto Linux: Creating Live-SD card|Creating Live SD-card]] article provides a brief int809 bytes (103 words) - 11:22, 16 January 2019
- {{:Transclusion: CL-SOM-iMX7: Yocto Linux: Building}} * [[IOT-GATE-iMX7 and SBC-IOT-iMX7: Yocto Linux: Creating Live-SD card|Creating a Live-SD card]]403 bytes (43 words) - 14:42, 23 January 2019
- This page contains links to information about Yocto Linux distribution for the CompuLab UCM-iMX8M-Mini ultra-compact System-on-Module The Yocto Project is an open-source collaboration focused on embedded Linux development.5 KB (663 words) - 10:16, 26 July 2023
- ...uctions needed to install the Yocto Linux SD-card image on SD card using a Linux Host workstation. The image provides full boot system including U-Boot, Linux kernel, device driver modules and example root file system.2 KB (348 words) - 21:54, 8 June 2021
- Please use the `CompuLab Deployment Tool` to install UCM-iMX8M-Mini Yocto Linux onto on-board eMMC storage. {{Important|UCM-iMX8M-Mini Linux build version '''2.0''' (based on the kernel 5.4.x) requires U-Boot version2 KB (275 words) - 01:12, 23 October 2020
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> There are often compatibility issues between different Linux distributions and the dependencies required for Yocto compilation.<br>2 KB (293 words) - 10:17, 26 July 2023
- ucm-imx8m-mini_yocto-linux ...c.bz2}} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system1 KB (152 words) - 09:34, 25 November 2021
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...o init -u git://source.codeaurora.org/external/imx/imx-manifest.git -b imx-linux-sumo -m imx-4.14.78-1.0.0_ga.xml2 KB (316 words) - 19:19, 21 May 2019
- [[Category:Linux|Known issues]]810 bytes (115 words) - 09:35, 25 November 2021
- Yocto Linux uses Gstreamer as a default multimedia framework. Here are some useful Gstr The following command should be executed on host PC (Linux) to receive the video stream:6 KB (884 words) - 10:51, 5 July 2023
- This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX8 System-on-Module / Computer-on-Mo The Yocto Project is an open-source collaboration focused on embedded Linux development.3 KB (315 words) - 11:23, 3 December 2019
- This article provides an introduction on how to install Linux kernel and root filesystem image on the CompuLab CL-SOM-iMX7 System-on-Modu ...tions: 128MB and 1GB. The example filesystem image provided by CL-SOM-iMX7 Linux Package is not designed for installation onto the 128MB NAND flash and will5 KB (686 words) - 15:02, 17 June 2019
- This page contains links to information about Debian Linux distribution for the CompuLab UCM-iMX8M-Mini ultra-compact System-on-Module {{Resources Linux2 KB (337 words) - 13:27, 18 August 2022
- ...ctions needed to install the Debian Linux SD-card image on SD card using a Linux Host workstation. The image provides full boot system including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (295 words) - 13:28, 18 August 2022
- ucm-imx8m-mini-debian-linux/ ...ard.img.bz2}} - SD card image that provides a full boot stack with U-Boot, Linux kernel and Debian file-system585 bytes (58 words) - 13:28, 18 August 2022
- Please use the `CompuLab Deployment Tool` to install UCM-iMX8M-Mini Debian Linux onto on-board eMMC storage. ...inux:_Manual_Installation:_SD_card#Run%20Debian%20Linux%20image|Run Debian Linux image]] you intend to deploy.2 KB (235 words) - 07:43, 8 August 2019
- 109 bytes (15 words) - 17:44, 16 June 2019
- ...uctions needed to install the Yocto Linux SD-card image on SD card using a Linux Host workstation. The image provides a full boot system which includes U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (259 words) - 14:51, 7 August 2019
- Please use the `CompuLab Deployment Tool` to install CL-SOM-iMX8 Yocto Linux onto on-board eMMC storage. ...ux:_Manual_Installation:_SD_card#Run%20Yocto%20Linux%20image|Run the Yocto Linux image]] that you intend to deploy.2 KB (231 words) - 14:12, 7 August 2019
- ....bz2 }} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system * {{filename|rootfs.tar.bz2}} - compressed Yocto Linux root file system tree2 KB (240 words) - 13:56, 7 August 2019
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...o init -u git://source.codeaurora.org/external/imx/imx-manifest.git -b imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml2 KB (330 words) - 08:59, 6 August 2019
- [[Category:Linux]]277 bytes (35 words) - 08:08, 6 August 2019
- This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX8X System-on-Module / Computer-on-M The Yocto Project is an open-source collaboration focused on embedded Linux development.3 KB (354 words) - 08:22, 9 January 2020
- ...uctions needed to install the Yocto Linux SD-card image on SD card using a Linux Host workstation. The image provides a full boot system including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (305 words) - 07:27, 21 August 2019
- ...are a bootable SD card and use it to boot the system [[CL-SOM-iMX8X: Yocto Linux: Manual Installation: SD card|as described here]]. ...ation:_SD_card#Run_Yocto_Linux_image%20Yocto%20Linux%20image|Run the Yocto Linux image]] that you intend to deploy.1 KB (221 words) - 15:19, 15 August 2019
- ....bz2 }} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system * {{filename|rootfs.tar.bz2}} - compressed Yocto Linux root file system tree1 KB (168 words) - 12:47, 15 August 2019
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...o init -u git://source.codeaurora.org/external/imx/imx-manifest.git -b imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml2 KB (321 words) - 12:37, 8 December 2019
- The CL-SOM-iMX8X Linux kernel provides support for on-board peripherals/interfaces of the CL-SOM-i ...https://releases.linaro.org/components/toolchain/binaries/latest-7/aarch64-linux-gnu/ Linaro] cross compiler.1 KB (175 words) - 07:35, 19 February 2020
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...o init -u git://source.codeaurora.org/external/imx/imx-manifest.git -b imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml2 KB (320 words) - 16:33, 17 November 2019
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...o init -u git://source.codeaurora.org/external/imx/imx-manifest.git -b imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml2 KB (302 words) - 12:44, 8 December 2019
- 4 KB (628 words) - 08:18, 9 January 2020
- This page contains links to information about Yocto Linux distribution for the CompuLab IOT-GATE-iMX8 Internet of Things Gateway and The Yocto Project is an open-source collaboration focused on embedded Linux development.6 KB (614 words) - 13:44, 8 October 2023
- This page contains links to information about Linux kernels, packages and software development for the Compulab IOT-GATE-iMX8 I ...an file-system image based on [http://www.debian.org/ports/arm/ ARM Debian Linux].</br>8 KB (864 words) - 13:50, 28 November 2023
- ...ebian Linux live image on the IOT-GATE-iMX8 / SBC-IOT-iMX8 device, using a Linux Host workstation and a USB flash drive. The image includes Linux kernel, device driver modules, and Debian root filesystem.2 KB (252 words) - 15:14, 6 June 2023
- 450 bytes (66 words) - 15:39, 13 September 2020
- ...image for the CompuLab IOT-GATE-iMX8 / SBC-IOT-iMX8 is based on Debian GNU/Linux stretch. The default Debian Linux image includes more than 350 software packages. Among them:7 KB (1,035 words) - 12:22, 8 October 2023
- iot-gate-imx8-debian-linux/ * {{filename|debian.iot-gate-imx8.live-img.xz}} - live image that provides a Linux kernel and Debian file-system2 KB (249 words) - 15:16, 20 June 2021
- 0 bytes (0 words) - 10:04, 18 September 2020
- This page contains links to information about Yocto Linux distribution for the CompuLab MCM-iMX8M-Mini ultra-compact System-on-Module The Yocto Project is an open-source collaboration focused on embedded Linux development.4 KB (458 words) - 10:13, 5 October 2023
- ...uctions needed to install the Yocto Linux SD-card image on SD card using a Linux Host workstation. The image provides full boot system including U-Boot, Linux kernel, device driver modules and example root filesystem.2 KB (296 words) - 10:15, 5 October 2023
- Please use the `CompuLab Deployment Tool` to install MCM-iMX8M-Mini Yocto Linux onto on-board eMMC storage. ...ux:_Manual_Installation:_SD_card#Run%20Yocto%20Linux%20image|Run the Yocto Linux image]] that you intend to deploy.2 KB (234 words) - 14:42, 26 July 2020
- Yocto Linux uses Gstreamer as a default multimedia framework. Here are some useful Gstr The following command should be executed on host PC (Linux) to receive the video stream:5 KB (731 words) - 14:45, 16 July 2020
- ...c.bz2}} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system * {{filename|Image-mcm-imx8m-mini}} - ready to run Linux kernel for MCM-iMX8M-Mini5 KB (216 words) - 10:14, 5 October 2023
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> Linux Distributions to be used on a host are listed [https://www.yoctoproject.org3 KB (440 words) - 12:03, 11 January 2022
- [[Category:Linux]]396 bytes (52 words) - 12:03, 11 January 2022
- ...Yocto Linux live image on the IOT-GATE-iMX8 / SBC-IOT-iMX8 device, using a Linux Host workstation and a USB flash drive. The image includes the Linux kernel, device driver modules, and Yocto root filesystem.2 KB (226 words) - 14:24, 28 June 2023
- Yocto Linux image for the CompuLab IOT-GATE-iMX8 and SBC-IOT-iMX8 includes the drivers #* In most Linux PCs, the serial port will be denoted as one of the following (where n is a5 KB (687 words) - 13:45, 8 October 2023
- * {{filename|yocto.iot-gate-imx8.live-img.bz2}} - live image that provides a Linux kernel and Yocto file-system * {{filename|rootfs.tar.bz2}} - Yocto Linux root file-system2 KB (241 words) - 11:30, 19 July 2022
- Yocto Project is an open-source collaboration focused on embedded Linux development.<br> The purpose of this article is to show how to build Yocto Linux images for the CompuLab IOT-GATE-iMX8 and SBC-IOT-iMX8.2 KB (275 words) - 10:28, 24 February 2021
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...o init -u git://source.codeaurora.org/external/imx/imx-manifest.git -b imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml2 KB (326 words) - 15:39, 18 October 2020
- The Yocto Project is an open-source collaboration focused on embedded Linux development.<br> ...[https://source.codeaurora.org/external/imx/imx-manifest/tree/README?h=imx-linux-zeus the NXP readme file]3 KB (403 words) - 13:00, 11 May 2021
Page text matches
- | align="center" | [[UCM-iMX93L NXP iMX93 Linux Resources|<span style="color:white;">UCM-iMX93L</span>]] | align="center" | [[UCM-iMX93 NXP iMX93 Linux Resources|<span style="color:white;">UCM-iMX93</span>]]22 KB (2,522 words) - 16:30, 22 February 2024
- This page contains links to information about Linux kernels, packages and software development for CM-X270 modules. ...system image]] based on Debian Linux. It is possible to use other embedded Linux distributions and environments.3 KB (391 words) - 14:21, 15 December 2009
- #REDIRECT [[CM-X270: Linux: Getting started]]45 bytes (5 words) - 08:01, 23 December 2009
- #REDIRECT [[Linux: Development for ARM modules]]48 bytes (6 words) - 08:10, 23 December 2009
- #REDIRECT [[Linux Development for XScale modules]]50 bytes (6 words) - 11:54, 28 February 2008
- #REDIRECT [[CM-X270: Linux: Kernel]]36 bytes (4 words) - 08:45, 23 December 2009
- #REDIRECT [[CM-X270: Linux: MTD drivers]]41 bytes (5 words) - 08:11, 23 December 2009
- ...on Ubuntu 9.10. [http://www.compulab.co.il/iam/download/iam-linux.zip The Linux package for CM-iAM] includes a ready-to-run NAND flash image and kernel sou * A tftpd package for your distribution on a Linux-based host. For example tftpd-hpa on Ubuntu.5 KB (673 words) - 16:27, 23 June 2010
- ...is available in [http://www.compulab.co.il/iam/download/iam-linux.zip The Linux package for CM-iAM] under the ''kernel'' directory. The configuration file ...ch {{filename|arch/x86/kernel/reboot.c}}. The patch is present in official Linux sources starting from the 2.6.31 version.30 KB (1,545 words) - 11:53, 13 May 2010
- This page contains links to information about Linux kernels, packages and software development for CM-A510 modules. ...ian.org/ports/arm/ ARM Debian Linux]. It is possible to use other embedded Linux distributions and environments.2 KB (222 words) - 13:03, 31 August 2015
- ...d drive. The NFS method is recommended because NFS setup will ease further Linux evaluation and development.}} * Download the [http://www.compulab.co.il/a510/download/a510-linux.zip Linux distribution package for CM-A510] from CompuLab's website . Unzip the packa6 KB (984 words) - 07:40, 26 August 2015
- #REDIRECT [[EM-X270: Linux: Getting started]]45 bytes (5 words) - 08:04, 23 December 2009
- This page contains links to information about Linux kernels, packages and software development for EM-X270 device. * [[Getting started with Linux on EM-X270]]1 KB (167 words) - 14:23, 15 December 2009
- This page contains links to information about Linux kernels, packages and software development for CM-iGLX modules. * [[Getting started with Linux on CM-iGLX]]871 bytes (115 words) - 14:46, 15 December 2009
- #REDIRECT [[CM-iGLX: Linux: Gentoo]]36 bytes (4 words) - 07:59, 23 December 2009
- ...4-34-fitpc2 linux-image-2.6.24-34-fitpc2 linux-kernel-devel linux-libc-dev linux-source ...pt-get purge linux-image-2.6.24-24-generic linux-headers-2.6.24-24-generic linux-headers-2.6.24-243 KB (488 words) - 08:15, 23 December 2009
- * [[Getting started with Linux on CM-X300]]5 KB (768 words) - 10:27, 4 April 2013
- #REDIRECT [[CM-iGLX: Linux: Getting started]]45 bytes (5 words) - 08:03, 23 December 2009
- #REDIRECT [[EM-X270: Linux: Angstrom]]38 bytes (4 words) - 15:41, 22 December 2009
- #REDIRECT [[Debian Linux for CM-X270]]38 bytes (5 words) - 15:03, 10 March 2008
- #REDIRECT [[Getting started with Linux on CM-X270]]51 bytes (7 words) - 15:04, 10 March 2008
- The Linux file system for CompuLab CM-X270 module is based on Debian GNU/Linux 4.0 (etch) distribution and includes the following components: * Various Linux utilities (basic Debian set of utilities from debootstrap)11 KB (1,636 words) - 09:12, 23 November 2008
- #REDIRECT [[Gentoo Linux for CM-iGLX]]38 bytes (5 words) - 15:06, 10 March 2008
- #REDIRECT [[Angstrom Linux for EM-X270]]40 bytes (5 words) - 15:07, 10 March 2008
- #REDIRECT [[CM-X270: Linux: Kernel]]36 bytes (4 words) - 06:25, 15 October 2017
- #REDIRECT [[CM-iGLX: Linux: Getting started]]45 bytes (5 words) - 08:10, 23 December 2009
- #REDIRECT [[Getting started with Linux on EM-X270]]51 bytes (7 words) - 15:09, 10 March 2008
- The Linux kernel for CM-T3530 may be built with support for very low power sleep mode ...se {{filename|cm_t35_pm_defconfig}} kernel configuration file to build the Linux kernel with enabled power management features.}}2 KB (283 words) - 08:38, 17 August 2010
- The run-time demo Angstrom Linux filesystem including the video modules was created using OpenEmbedded frame If the CM-T3530 Linux kernel image is built outside the OpenEmbedded framework, the pre-built DSP8 KB (1,091 words) - 13:05, 10 July 2011
- ...CM-X270. Below we describe how OpenEmbbeded can be used for development of Linux applications and distributions for CM-X270.636 bytes (78 words) - 13:21, 23 April 2008
- #REDIRECT [[CM-X270: Linux: SPI support]]41 bytes (5 words) - 08:12, 23 December 2009
- #REDIRECT [[CM-iGLX: Linux: Video Input Port]]46 bytes (6 words) - 08:13, 23 December 2009
- ...installed as described in [[Linux_Development_for_XScale_modules#MTD_utils|Linux Development for XScale modules]] article. * [[Linux_Development_for_XScale_modules|Linux Development for XScale modules]]5 KB (542 words) - 15:24, 22 September 2013
- ...Linux kernels support most of SBC-FITPC2 hardware features. Starting with Linux kernel 2.6.32 SBC-FITPC2 support is merged into the mainline. == Patches for Linux kernel earlier than 2.6.32 ==27 KB (1,242 words) - 08:44, 23 December 2009
- #REDIRECT [[CM-X270: Linux: Debian]]36 bytes (4 words) - 15:56, 22 December 2009
- #REDIRECT [[CM-X300: Linux: Debian]]36 bytes (4 words) - 15:51, 22 December 2009
- ...evaluation and development process. The Exeda users are free to choose the Linux flavor that suits best their specific application requirements. This page includes description of the package structure, Linux installation procedure and peripheral device options specific to Exeda.14 KB (1,572 words) - 08:44, 23 December 2009
- This page contains links to information about Linux kernels, packages and software development for CM-X300 modules. ...file system image]] based on [http://www.debian.org/ports/arm/ ARM Debian Linux].2 KB (330 words) - 13:57, 29 September 2013
- #REDIRECT [[CM-X300: Linux: Getting started]]45 bytes (5 words) - 08:02, 23 December 2009
- #REDIRECT [[CM-X300: Linux: Kernel]]36 bytes (4 words) - 08:45, 23 December 2009
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-X300 modules. == Building Linux kernel for CM-X300 ==8 KB (843 words) - 13:43, 29 September 2013
- This page contains links to information about Linux kernels, packages and software development for Exeda device. * [[Linux kernel for Exeda]]437 bytes (57 words) - 14:24, 15 December 2009
- ...android.zip CompuLab Android package for Exeda] includes NAND flash image, Linux kernel configuration and source code patches, and patches and configuration * {{filename|kernel-2.6.25-exeda.jffs2}} - JFFS2 image of Linux kernel 2.6.25 with Android and Exeda patches6 KB (946 words) - 14:24, 15 December 2009
- #REDIRECT [[Exeda: Linux: Kernel]]34 bytes (4 words) - 08:44, 23 December 2009
- ...CompuLab Linux package for CM-X300 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi The default Debian Sid Linux image includes more than 400 software packages. Among them:7 KB (1,140 words) - 13:47, 29 September 2013
- ...h drive. The first method is preferred because NFS setup will ease further Linux evaluation and development.}} ...in the [http://compulab.co.il/products/computer-on-modules/cm-x300/#devres Linux package for CM-X300].6 KB (903 words) - 10:58, 5 May 2014
- #REDIRECT [[Linux: JFFS2 images over UBI layer]]48 bytes (7 words) - 08:08, 23 December 2009
- The Linux file system for CompuLab CM-X270 module is based on Debian GNU/Linux 4.0 (etch) distribution and includes the following components: * Various Linux utilities (basic Debian set of utilities from debootstrap)11 KB (1,639 words) - 15:44, 19 August 2012
- | The contents of this variable are passed to the Linux kernel as boot arguments ...inux}} - the default Linux boot from NAND sequence is executed. Please see Linux documentation for details.9 KB (1,442 words) - 11:17, 5 March 2012
- #REDIRECT [[SBC-FITPC2: Linux: Kernel]]39 bytes (4 words) - 08:44, 23 December 2009
- ...rom [http://www.compulab.co.il/products/handheld-computers/em-x270/#devres Linux package for EM-X270] onto USB flash drive formatted with FAT filesystem. * Next environment settings are passed to Linux Kernel and are needed for NFS root:5 KB (732 words) - 08:38, 23 October 2016
- ...ompuLab Linux package for EM-X270] includes ready to run NAND flash image, Linux kernel configuration and source code patches, and OpenEmbedded configuration files used to build the Angstrom Linux image. The package also features LiveDisk image for easy installation of t12 KB (1,743 words) - 15:15, 30 October 2010
- ...l-api.org/docs/online/2.6.17/da/dfa/linux_2spi_2spi_8h-source.html include/linux/spi/spi.h]. * [[Getting started with Linux on CM-X270]]9 KB (1,317 words) - 08:12, 23 December 2009
- ...tionality can be enabled in using [http://v4l2spec.bytesex.org/ "Video for Linux 2 (v4l2)" API]. CompuLab provides [http://www.compulab.co.il/mediawiki/files/Linux/iglx/geodelx-v4l2.tar.gz geodelx-v4l2 package] which contains a driver that18 KB (1,053 words) - 08:13, 23 December 2009
- #REDIRECT [[SBC-FITPC2: Linux: Ubuntu 8.04 LTS]]48 bytes (5 words) - 08:15, 23 December 2009
- # Copy the contents of this Linux package’s ZIP file to the {{filename|C:\LIN_INST\}} folder on your PC. Un # Reboot and enjoy Linux on the CM-iGLX.5 KB (794 words) - 08:03, 23 December 2009
- This page contains links to information about Linux kernel, packages and software development for SBC-FITPC2 modules. ...nux Kernel for SBC-FITPC2|Linux kernel]]. It should be possible to use any Linux distribution with SBC-FITPC2, although certain features may require custom612 bytes (77 words) - 14:26, 15 December 2009
- #REDIRECT [[CM-iAM: Linux: Getting started]]44 bytes (5 words) - 08:03, 23 December 2009
- #REDIRECT [[CM-iAM: Linux: Kernel]]35 bytes (4 words) - 08:45, 23 December 2009
- ...s, frameworks and utilities. All these has to be cross-compiled also. Most Linux and Open Source software projects use a {{cmd|1=configure}} script to confi ...okylinux.org/ Poky Linux], and [http://www.denx.de/wiki/DULG/ELDK Embedded Linux Development Kit].24 KB (2,956 words) - 09:11, 16 August 2012
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-X270 modules. == Building Linux kernel for CM-X270 ==10 KB (1,216 words) - 07:39, 20 August 2012
- == Linux MTD drivers for NAND flash on CM-X270 == Linux kernel BSP for CM-X270 includes8 KB (1,219 words) - 15:46, 19 August 2012
- ...e guidelines for image modification, and even creation of your own Gentoo Linux for CM-iGLX. The Linux image we provide is made as generic as possible. It includes more then 20020 KB (3,094 words) - 08:00, 23 December 2009
- #REDIRECT [[CM-iAM: Linux: Ubuntu]]35 bytes (4 words) - 06:21, 15 October 2017
- ...standard Linux JFFS2 format. The image can be loaded into the CM-X270 from Linux '''only'''. For convenience of the installation we provide small ramdisk im ...d the [http://compulab.co.il/wp-content/uploads/2011/09/x270-linux-img.zip Linux distribution package for CM-X270] from CompuLab's website . Unzip the packa10 KB (1,560 words) - 15:30, 19 August 2012
- This page contains links to information about the Linux kernel, packages and software development for CM-iAM modules. ...ple file system image]] based on Ubuntu Linux. It is possible to use other Linux distributions and environments.764 bytes (106 words) - 10:14, 6 May 2010
- {{Resources Linux2 KB (347 words) - 11:20, 1 April 2014
- Linux kernel for CM-T3530 modules provides support for on-board peripherals and a ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3530 modules.5 KB (758 words) - 13:07, 28 October 2013
- == Angstrom Linux images == ...framework. The OpenEmbedded framework can also be used for building custom Linux images.10 KB (1,404 words) - 12:13, 28 October 2013
- #REDIRECT [[CM-iAM: Linux: Ubuntu]]35 bytes (4 words) - 17:20, 4 November 2014
- "Multi-File Images" contain several images, typically an OS (Linux) kernel image and one or more data images like RAMDisks. This construct is ...mage.tar.gz|here (mkimage.tar.gz)]]. The archive contains both Windows and Linux executables.3 KB (474 words) - 07:49, 23 December 2009
- ...ernel patch for '''SBC-FITPC2 Watchdog'''. It will be included in official linux tree in future versions. ...t`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.8 KB (1,096 words) - 11:14, 19 August 2009
- ...m/sgpp/lite/arm/portal/release324 Sourcery G++ Lite 2008q1-126 for ARM GNU/Linux].6 KB (948 words) - 10:12, 4 April 2013
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T3530 (link below). * Download the Linux package for CM-T3530 from [http://compulab.co.il/products/computer-on-modul14 KB (2,180 words) - 13:33, 28 October 2013
- ...example run-time Linux filesystem image for CM-T3530 is based on Angstrom Linux 2010. ...ckage for CM-T3530] includes ready to run Angstrom Linux filesystem image, Linux kernel and source code patches.11 KB (1,627 words) - 05:51, 29 October 2013
- This page contains links to information about Linux kernels, packages and software development for CM-T3530 modules. ...rom-distribution.org Angstrom Linux]. It is possible to use other embedded Linux distributions and environments with CM-T3530. The CM-T3530 platform is supp2 KB (346 words) - 11:30, 28 October 2013
- [[Category:Linux|Known issues]] [[Category:CM-T3530|Linux: Known issues]]786 bytes (115 words) - 11:49, 28 October 2013
- === Linux === Detailed description how use Linux {{cmd|fdisk}} utility to adjust MMC/SD card partition table to suit OMAP3x4 KB (624 words) - 14:18, 9 January 2013
- #REDIRECT [[Linux: Development for ARM modules]]48 bytes (6 words) - 08:09, 23 December 2009
- ...ompuLab is [http://tftpd32.jounin.net TFTPD32], it is also included in the Linux and WinCE distribution packages.21 KB (2,332 words) - 14:26, 16 March 2010
- ...ystem packages include archive of basic Debian system created with [http://linux.die.net/man/8/debootstrap debootsrap]. * Use [http://linux.die.net/man/8/apt-get apt-get] package handling utility to install required4 KB (576 words) - 07:01, 1 June 2010
- * [[CM-A510: Linux: Getting started]]7 KB (990 words) - 13:51, 2 February 2015
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-A510 modules. The CM-A510 Linux kernel is shipped with built-in command line parameters:6 KB (854 words) - 13:15, 31 August 2015
- ...D flash image, archive of the root filesystem used to create the image and Linux kernel configuration and source code patches. The default Debian Sid Linux image takes approximately 170 megabytes of flash space, and includes more t5 KB (709 words) - 16:05, 13 December 2011
- #REDIRECT [[CM-T3x: Linux: Booting from MMC/SD card]]53 bytes (9 words) - 07:20, 31 January 2011
- This page contains links to information about the Linux packages and software development for CM-iTC modules. CompuLab Linux support for the CM-iTC includes:1 KB (176 words) - 15:21, 19 March 2013
- * The Linux Package for CM-iTC includes a ready-to-run image that can be installed on S ...zip the [http://compulab.co.il/products/computer-on-modules/cm-itc/#devres Linux Package] for CM-iTC to the host PC1 KB (181 words) - 14:01, 18 March 2013
- * The Linux distribution on CM-iTC is Linux Mint 13 LTS with full-featured MATE desktop environment. ...Note|The EMGD drivers in their current state are not included in any major Linux distribution yet. There are still a few technical and compatibility issues8 KB (1,295 words) - 15:20, 19 March 2013
- * linux_3.2.0.orig.tar.gz - mainline Linux 3.2.0 sources $ cd /path/to/itc-linux/kernel/linux-3.22 KB (275 words) - 14:05, 18 March 2013
- * tftpd package for your distribution on a Linux-based host. For example, tftp-server-0.34-1mdk on Mandrake.13 KB (1,999 words) - 13:00, 14 July 2011
- {{Resources Linux2 KB (322 words) - 11:18, 1 April 2014
- CM-T3730 Linux supports various camera devices connected either to the USB subsystem or to Linux USB camera support is provided by USB Video Class (UVC) driver. All UVC com63 KB (6,998 words) - 11:43, 16 February 2014
- ...{{cmd|gplay}} tool or the Gstreamer pipeline as described in the [[CM-FX6: Linux: Debian#Video Playback|Video Playback]] article. [[Category:Linux|Known issues]]796 bytes (107 words) - 11:46, 5 February 2017
- ...mpuLab CM-FX6 System-on-Module / Computer-on-Module is based on Debian GNU/Linux Stretch. ...CompuLab Linux package for CM-FX6 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi36 KB (5,110 words) - 09:06, 5 February 2017
- {{Resources Linux : Android/Linux kernel updates:3 KB (364 words) - 15:04, 15 June 2015
- ...ing can be overridden by providing alternate boot arguments to the Android/Linux kernel.6 KB (839 words) - 13:59, 4 November 2014
- ...n the [http://developer.android.com/sdk/index.html Android SDK]. Also some Linux disributions provide the ADB within their package repositories. * Properly configure a Linux PC workstation, e.g. on Ubuntu this should be:3 KB (445 words) - 06:12, 6 April 2014
- : On Linux, the instructions below may be used instead: : On Linux, the instructions below may be used instead:5 KB (661 words) - 09:18, 17 December 2014
- = Cloning the Linux kernel =709 bytes (97 words) - 13:59, 21 May 2014
- This page contains links to information about the Linux packages and software development for CM-iGT modules. CompuLab Linux support for the CM-iGT includes:1 KB (174 words) - 13:06, 29 October 2015
- * The Linux package for CM-iGT includes a ready-to-run image that can be installed on S ...oad the [http://compulab.co.il/products/computer-on-modules/cm-igt/#devres Linux Package] for CM-iGT to the host PC and ensure the integrity of the file:2 KB (326 words) - 13:07, 29 October 2015
- * Linux on CM-iGT is Linux Mint 17 LTS with full-featured MATE desktop environment * Watchdog is already installed and configured on the Linux image provided by CompuLab5 KB (746 words) - 13:42, 29 October 2015
- * linux_3.16.0.orig.tar.gz - mainline Linux 3.16.0 sources The kernel can be recompiled with necessary changes as described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]809 bytes (111 words) - 13:31, 29 October 2015
- [[Category:Linux|Known issues]] [[Category:CM-iGT|Linux: Known issues]]196 bytes (23 words) - 14:47, 13 July 2014
- * Obtain a Linux PC workstation (host). ...nux: Kernel#Getting_Fastboot|Getting Fastboot]] section of the [[CM-QS600: Linux: Kernel]] article.7 KB (1,033 words) - 13:23, 3 January 2016
- #REDIRECT [[CM-FX6 Freescale i.MX6 Linux]]42 bytes (6 words) - 11:41, 29 December 2016
- CompuLab Android support includes fine-tuned Linux kernel and Android KitKat reference file system.2 KB (284 words) - 15:33, 3 November 2015
- 2 KB (282 words) - 10:49, 21 October 2015
- ...n the [http://developer.android.com/sdk/index.html Android SDK]. Also some Linux disributions provide fastboot within their package repositories. ...tition. Destroy boot partition signature, issuing on the device (in either Linux or Android command line): <pre># dd if=/dev/zero of=/path/to/boot/partition2 KB (274 words) - 08:55, 21 September 2015
- Notice, on Ubuntu Linux, the user running PuTTY might be required to belong to ''dialout'' user gro1 KB (159 words) - 08:49, 21 September 2015
- * CompuLab patches on top of Android for APQ8064 including Linux kernel patches, Android device configuration files and firmware binary blob * [http://linux.die.net/man/8/gdisk GPT-partition] SD-card, creating ''system'', ''cache''9 KB (1,218 words) - 13:23, 1 November 2015
- ...background-color: #eeeeee;" align="center" width="25%" | [[CM-iGT_Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-iGT_Linux]]1 KB (164 words) - 13:41, 5 July 2018
- ...ackground-color: #eeeeee;" align="center" width="25%" | [[CM-T3730 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-T3730 Linux]]987 bytes (107 words) - 13:07, 5 July 2018
- ...background-color: #eeeeee;" align="center" width="25%" | [[CM-iTC Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-iTC_Linux]]979 bytes (107 words) - 13:43, 5 July 2018
- ...ackground-color: #eeeeee;" align="center" width="33%" | [[CM-T3517 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-T3517 Linux]]1 KB (152 words) - 13:12, 5 July 2018
- ...background-color: #eeeeee;" align="center" width="50%" | [[CM-A510 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-A510_Linux]]535 bytes (60 words) - 13:52, 5 July 2018
- ...ackground-color: #eeeeee;" align="center" width="25%" | [[CM-T3530 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-T3530 Linux]]980 bytes (107 words) - 13:11, 5 July 2018
- ...ign="center" width="25%" | [[COMEX-IC60U Intel Kaby Lake COM Express Linux|Linux]] ...[[Image:Linux-Logo.jpg|200px|link=COMEX-IC60U Intel Kaby Lake COM Express Linux]]1 KB (176 words) - 13:18, 5 July 2018
- ...background-color: #eeeeee;" align="center" width="33%" | [[CM-X300 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-X300_Linux]]731 bytes (82 words) - 13:54, 5 July 2018
- ...background-color: #eeeeee;" align="center" width="33%" | [[CM-iAM Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-iAM_Linux]]744 bytes (83 words) - 13:56, 5 July 2018
- ...ackground-color: #eeeeee;" align="center" width="50%" | [[CM-T3530 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-T3530_Linux]]569 bytes (63 words) - 13:57, 5 July 2018
- ...ackground-color: #eeeeee;" align="center" width="100%" | [[CM-iGLX_Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-iGLX_Linux]]348 bytes (39 words) - 13:58, 5 July 2018
- ...background-color: #eeeeee;" align="center" width="50%" | [[EM-X270_Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=EM-X270_Linux]]541 bytes (61 words) - 14:00, 5 July 2018
- ...background-color: #eeeeee;" align="center" width="50%" | [[CM-X270 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=CM-X270 Linux]]536 bytes (61 words) - 14:02, 5 July 2018
- ...ground-color: #eeeeee;" align="center" width="100%" | [[SBC-FITPC2 Linux | Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=SBC-FITPC2 Linux]]357 bytes (39 words) - 14:03, 5 July 2018
- Ubuntu Linux for the CM-iAM is based on standard Ubuntu 9.10 Karmic Koala. The run-time * Described in more detail on the [[Linux Kernel for CM-iAM|Linux kernel for CM-iAM]] page.7 KB (1,134 words) - 17:20, 4 November 2014
- ...TA, USB3, RS232 and WiFi 802.11. CM-T54 is provided with full ready-to-run Linux software packages and comprehensive documentation.<br><br> ...background-color: #eeeeee;" align="center" width="25%" | [[CM-T54_Linux | Linux]]3 KB (461 words) - 13:39, 5 July 2018
- ...n append (with little changes) the {{parameter|customlcd}} variable to the Linux kernel command line, so the kernel will take care of the LCD setup on boot. * [[Getting started with Linux on CM-X300]]14 KB (2,012 words) - 10:17, 4 April 2013
- {{Resources Linux2 KB (203 words) - 13:04, 26 August 2015
- Please refer to [[CM-T3x: Linux: Booting from MMC/SD card]] for further details. | Linux kernel5 KB (735 words) - 12:19, 11 November 2013
- ...per boot from on-board NAND flash. It is recommended to create a [[CM-T3x: Linux: Booting from MMC/SD card|bootable MMC/SD card]] before updating CM-T3x fir ...updated using a workstation with an SD card reader, or using CM-T3x module Linux environment.8 KB (1,181 words) - 14:15, 29 June 2014
- {{Resources Linux2 KB (238 words) - 08:06, 19 November 2015
- This page contains links to information about Linux kernels, packages and software development for CM-T3517 modules. ...rg/ports/arm/ ARM Debian Linux]. It is also possible to use other embedded Linux distributions and environments with CM-T3517.2 KB (312 words) - 14:01, 15 January 2013
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T3517 (link below). * Download the Linux package for CM-T3517 from [http://compulab.co.il/products/computer-on-modul11 KB (1,677 words) - 10:31, 9 March 2013
- ...ompuLab Linux package for CM-T3517 includes ready to run NAND flash image, Linux kernel configuration and source code patches and an archive of the root fil The default Debian Sid Linux image includes more than 400 software packages. Among them:25 KB (3,551 words) - 11:09, 25 February 2014
- ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3517 modules. The Linux kernel for CM-T3517 is shipped with built-in command line parameters:39 KB (2,150 words) - 13:02, 11 March 2013
- [[Category:Linux|Known issues]] [[Category:CM-T3517|Linux: Known issues]]484 bytes (59 words) - 09:26, 10 January 2013
- Image Name: Linux-2.6.32.21+drm33.7-00068-g2 Image Type: ARM Linux Kernel Image (uncompressed)9 KB (1,057 words) - 06:31, 27 January 2011
- This page contains links to information about Linux kernels, packages and software development for CM-T3730 modules. ...bian.org/ports/arm/ ARM Debian] port. It is possible to use other embedded Linux distributions and environments with CM-T3730.4 KB (616 words) - 08:13, 18 February 2014
- ...ckage for CM-T3730] includes ready to run Angstrom Linux filesystem image, Linux kernel and source code patches. The default Angstrom Linux image includes more than 1000 software packages. Among them:20 KB (2,914 words) - 08:27, 18 February 2014
- CM-T3730 Linux package supplied with Angstrom and Debian example root filesystem images. This article provides an introduction on how to install the Angstrom Linux image on CM-T3730.15 KB (2,271 words) - 12:36, 16 February 2014
- Linux kernel for CM-T3730 modules provides support for on-board peripherals and a ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3730 modules.5 KB (749 words) - 09:39, 29 July 2013
- * [[CM-T3730 Linux]] * [[CM-T3730: Linux: Camera]]4 KB (516 words) - 08:29, 29 June 2012
- [[Category:Linux|Known issues]] [[Category:CM-T3730|Linux: Known issues]]1 KB (227 words) - 08:20, 18 February 2014
- == Angstrom Linux images == ...framework. The OpenEmbedded framework can also be used for building custom Linux images.14 KB (2,029 words) - 09:42, 29 July 2013
- ...mentation of CAN protocols for Linux. It uses the Berkeley socket API, the Linux network stack and implements the CAN device drivers as network interfaces. ...e well maintained sources of CAN utils available at [https://gitorious.org/linux-can Gitorious] and3 KB (483 words) - 11:06, 8 January 2013
- CM-T3730 Linux package supports DaVinci Multimedia Application Interface (DMAI). == Boot Loader and Linux Kernel ==15 KB (2,001 words) - 11:45, 16 February 2014
- ...ready to run Demo Android filesystem image and [[CM-T3730: Android: Kernel|Linux kernel]] based on 2.6.37 version. * Android Linux Kernel v2.6.3712 KB (1,703 words) - 10:12, 1 May 2014
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-FX6 (link below). * Download the Linux package for CM-FX6 from [http://compulab.co.il/products/computer-on-modules15 KB (2,354 words) - 13:22, 1 January 2017
- The Linux kernel for the CompuLab CM-FX6 System-on-Module / Computer-on-Module provid ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-FX6 modules.107 KB (3,846 words) - 10:10, 5 January 2017
- ...ckage for CM-T3730 includes ready to run Demo Android filesystem image and Linux kernel based on 2.6.37 version. * Obtain a Linux PC workstation.5 KB (761 words) - 08:20, 9 September 2013
- Linux kernel supplied with the [http://compulab.co.il/products/computer-on-module ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3730 modules.28 KB (1,691 words) - 15:30, 9 October 2013
- CompuLab Android support for CM-T3730 includes modifications of Linux kernel version 2.6.37 and a [[CM-T3730: Android|Android Demo file system im {{Resources Linux3 KB (367 words) - 14:21, 26 November 2013
- Please use the Linux x64 bin installer. cp /path/to/jdk/jdk-6uXX-linux-x64.bin $JDK_HOME6 KB (884 words) - 07:30, 7 July 2014
- [[Category:Linux|Known issues]] [[Category:CM-iTC|Linux: Known issues]]278 bytes (36 words) - 07:52, 20 March 2013
- * After using usb commands in U-Boot, Linux might fail to detect USB devices. : '''Workaround:''' Reset the module before booting Linux. This can be done using the reset button (SW2) or the U-Boot command {{cmd|319 bytes (45 words) - 17:14, 18 March 2014
- * After using usb commands in U-Boot, Linux might fail to detect USB devices. : '''Workaround:''' Reset the module before booting Linux. This can be done using the reset button (SW2) or the U-Boot command {{cmd|319 bytes (45 words) - 17:14, 18 March 2014
- : '''Workaround:''' After booting into Linux, use the {{cmd|fw_setenv}} utility to change the {{parameter|bootdelay}} va403 bytes (54 words) - 10:50, 13 May 2013
- #REDIRECT [[CM-T335 TI AM335x Linux]]37 bytes (6 words) - 13:06, 7 July 2015
- * Linux kernel images. ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T335 (link below).10 KB (1,529 words) - 17:58, 25 October 2016
- [[Category:Linux]]644 bytes (86 words) - 17:18, 15 September 2016
- ...b CM-T335 System-on-Module / Computer-on-Module is based on Debian 8.2 GNU/Linux Jessie (armhf). ...CompuLab Linux package for CM-T335 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi25 KB (3,362 words) - 06:32, 25 January 2017
- Linux kernel for the CompuLab CM-T335 System-on-Module / Computer-on-Module provi ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T335 modules.31 KB (1,794 words) - 17:14, 15 September 2016
- ...ackage for CM-T335 includes ready to run Demo Android filesystem image and Linux kernel based on 3.2.0 version. * Obtain a Linux PC workstation.16 KB (2,463 words) - 07:13, 23 June 2015
- ...ready to run Demo Android filesystem image and [[CM-T335: Android: Kernel|Linux kernel]] based on 3.2.0 version. * Android Linux Kernel v3.2.013 KB (1,814 words) - 11:39, 13 July 2015
- Linux kernel supplied with the [http://compulab.co.il/products/computer-on-module ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T335 modules.35 KB (2,256 words) - 11:56, 14 July 2015
- Please use the Linux x64 bin installer. cp /path/to/jdk/jdk-6uXX-linux-x64.bin $JDK_HOME7 KB (1,001 words) - 11:11, 14 July 2015
- | Linux kernel | Linux filesystem4 KB (609 words) - 11:47, 4 November 2014
- ** [https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/arm-linux-gnueabihf/ Linaro 4.9-2017.01] export CROSS_COMPILE=arm-none-linux-eabi-4 KB (558 words) - 08:31, 9 August 2022
- {{Resources Linux2 KB (219 words) - 18:20, 8 August 2022
- ...d using a workstation with a micro SD card reader, or using CM-T335 module Linux environment. * [[CM-T335: Linux: Getting started|Getting started with Linux on CM-T335]]5 KB (742 words) - 06:05, 28 September 2016
- export CROSS_COMPILE=arm-none-linux-eabi- export CROSS_COMPILE=arm-none-linux-eabi-4 KB (675 words) - 12:02, 3 December 2013
- The Graphics SDK version 4.10.00.01 includes the Linux graphics (SGX) drivers, OpenGLES1.1, OpenGLES2.0 and OpenVG demos for all T The CM-T335 Linux package contains pre-built graphics kernel modules and graphics demo applic2 KB (301 words) - 12:24, 14 September 2016
- ...xample run-time Linux filesystem image for CM-T3730 is based on Debian GNU/Linux Wheezy. ...ompuLab Linux package for CM-T3730 includes ready to run NAND flash image, Linux kernel configuration and source code patches, and an archive of the root fi24 KB (3,554 words) - 11:11, 25 February 2014
- = CM-T3730 Linux package contents = * {{filename|uImage-cm-t3730}} - ready to run Linux kernel image binary for CM-T37305 KB (704 words) - 09:09, 18 February 2014
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-T54 System-o ...bian.org/ports/arm/ ARM Debian] port. It is possible to use other embedded Linux distributions and environments with CM-T54.3 KB (397 words) - 11:44, 18 June 2015
- Linux kernel for the CompuLab CM-T54 System-on-Module / Computer-on-Module provid ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T54 modules.8 KB (1,163 words) - 04:40, 19 October 2016
- ...machines we recommend [http://tftpd32.jounin.net/ TFTPD32] included in the Linux package for CM-T54 (link below). * Download the Linux package for CM-T54 from [http://compulab.co.il/products/computer-on-modules15 KB (2,246 words) - 13:44, 18 June 2015
- ...mpuLab CM-T54 System-on-Module / Computer-on-Module is based on Debian GNU/Linux Wheezy. ...nux package for CM-T54 includes ready to run root filesystem demo archive, Linux kernel configuration and source code patches.19 KB (2,716 words) - 10:04, 18 June 2015
- {{Resources Linux3 KB (379 words) - 15:33, 18 October 2015
- ...filename|cm-fx6-bootloader-update.sh}} - A script for updating U-Boot from Linux | Linux kernel4 KB (577 words) - 11:43, 2 September 2015
- * [[CM-FX6: Linux: Getting started|Getting started with Linux on CM-FX6]]4 KB (524 words) - 07:16, 8 December 2016
- export CROSS_COMPILE=arm-none-linux-eabi-4 KB (643 words) - 15:26, 18 October 2015
- #REDIRECT [[CM-QS600 Qualcomm Snapdragon 600 APQ8064 Linux]]60 bytes (6 words) - 12:24, 6 July 2015
- ...on-Module / Computer-on-Module Linux kernel is based on the Snapdragon 600 Linux Platform Ubuntu-based [http://releases.linaro.org/14.09/ubuntu/ifc6410 14.0 ...xample run-time Linux filesystem image for CM-QS600 is based on Debian GNU/Linux Wheezy.14 KB (1,951 words) - 12:41, 9 November 2015
- Linux kernel for the CompuLab CM-QS600 System-on-Module / Computer-on-Module prov ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-QS600 modules.36 KB (2,292 words) - 12:42, 9 November 2015
- [[Category:Linux|Known issues]] [[Category:CM-T54|Linux: Known issues]]680 bytes (95 words) - 11:50, 18 June 2015
- {{Resources Linux1 KB (166 words) - 10:59, 18 December 2014
- export CROSS_COMPILE=arm-none-linux-eabi-4 KB (522 words) - 09:43, 18 December 2014
- | Linux file system /dev/sdb2 206848 62533295 31163224 83 Linux5 KB (676 words) - 11:40, 18 December 2014
- * [[CM-T54: Linux: Getting started|Getting started with Linux on CM-T54]]4 KB (583 words) - 10:59, 18 December 2014
- The firmware can be installed on an SD card using a Linux workstation with an SD card reader.1 KB (202 words) - 11:17, 18 December 2014
- --2015-06-18 10:49:48-- http://www.linux-usb.org/usb.ids Resolving www.linux-usb.org (www.linux-usb.org)... 216.34.181.974 KB (601 words) - 14:11, 24 December 2015
- /dev/sdg1 2048 488397167 244197560 83 Linux4 KB (471 words) - 10:13, 11 August 2015
- The firmware can be installed on a SATA drive using a Linux workstation with a SATA adaptor1 KB (229 words) - 08:17, 11 August 2015
- export CROSS_COMPILE=arm-marvell-linux-gnueabi-4 KB (600 words) - 11:34, 11 August 2015
- #REDIRECT [[CM-T43 TI AM437x Linux]]36 bytes (6 words) - 17:04, 6 July 2015
- [[Category:Linux]]831 bytes (91 words) - 08:27, 29 June 2016
- #REDIRECT [[CM-T43: Linux: Manual Installation]]48 bytes (5 words) - 11:23, 29 June 2016
- ...mpuLab CM-T43 System-on-Module / Computer-on-Module is based on Debian GNU/Linux Jessie. ...udes ready to run Linux kernel binary, root filesystem demo image archive, Linux kernel configuration and source code patches.18 KB (2,611 words) - 12:33, 29 June 2016
- Linux kernel for the CompuLab CM-T43 System-on-Module / Computer-on-Module provid ...nel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T43 modules.61 KB (3,274 words) - 11:27, 29 June 2016
- Being Linux under the hood, Android enables access to OS interfaces such as GPIO, seria * [[CM-FX6: Linux: Debian#GPIO access|CM-FX6 Linux GPIO access]]3 KB (366 words) - 15:06, 15 June 2015
- ...Lab CM-T54 System-on-Module / Computer-on-Module is based on Arago Project Linux filesystem for OMAP-5432-uEVM evaluation board from TI, distributed with th ...tarted]] page provides a brief introduction on how to install the run-time Linux image.15 KB (2,053 words) - 12:27, 18 June 2015
- * {{filename|zImage-cm-t54}} - ready to run Linux kernel image binary for CM-T54 * {{filename|zImage-3.8.13-cm-t54-5.bin}} - ready to run Linux kernel version 3.8.13-cm-t54-5 for CM-T543 KB (434 words) - 13:06, 18 June 2015
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-T43 System-o ...bian.org/ports/arm/ ARM Debian] port. It is possible to use other embedded Linux distributions and environments with CM-T43.3 KB (411 words) - 06:31, 24 August 2017
- ...unications and IoT applications. CM-T43 is provided with full ready-to-run Linux software packages and comprehensive documentation.<br><br> ...d-color: #eeeeee;" align="center" width="25%" | [[CM-T43 TI AM437x Linux | Linux]]4 KB (625 words) - 12:38, 5 July 2018
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-T335 System- ...le file system image based on [http://www.debian.org/ports/arm/ ARM Debian Linux].4 KB (602 words) - 06:32, 24 August 2017
- ...ded with comprehensive documentation and full ready-to-run SW packages for Linux, Android and Windows Embedded Compact 7 operating systems.<br><br> ...nd-color: #eeeeee;" align="center" width="25%" | [[CM-T335 TI AM335x Linux|Linux]]8 KB (1,101 words) - 07:05, 9 August 2022
- This page contains links to information about Linux kernels, packages and software development for the CompuLab CM-QS600 System ...file system image]] based on [http://www.debian.org/ports/arm/ ARM Debian Linux].3 KB (423 words) - 14:44, 25 December 2015
- ...ith comprehensive documentation and full ready-to-run SW packages for both Linux and Android.<br><br> ...="center" width="25%" | [[CM-QS600 Qualcomm Snapdragon 600 APQ8064 Linux | Linux]]5 KB (743 words) - 12:42, 5 July 2018
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux, Android and Windows Embedded Compact 7 operating systems.<br> ...lor: #eeeeee;" align="center" width="25%" | [[CM-FX6 Freescale i.MX6 Linux|Linux]]10 KB (1,516 words) - 13:16, 5 July 2018
- CompuLab Android support for CM-T335 includes modifications of Linux kernel version 3.2.0 and a [[CM-T335: Android|Android Demo file system imag {{Resources Linux3 KB (364 words) - 14:54, 1 August 2016
- = CM-A510 Linux package contents = * {{filename|uImage-cm-a510}} - ready to run Linux kernel image binary for CM-A5102 KB (271 words) - 06:37, 26 August 2015
- * The Linux package for COMEX-IE38 includes a ready-to-run image that can be installed ...the [http://compulab.co.il/products/computer-on-modules/comex-ie38/#devres Linux Package] for COMEX-IE38 to the host PC and ensure the integrity of the file2 KB (370 words) - 16:19, 31 August 2015
- ...X-IE38 is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-IE38 capabilities, support for the C1 KB (151 words) - 10:12, 8 September 2015
- * COMEX-IE38 supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-IE38: Linux: Getting started|Getting started with Linux on COMEX-IE38]]868 bytes (109 words) - 16:20, 31 August 2015
- ...align="center" width="25%" | [[COMEX-IE38 Intel BayTrail COM Express Linux|Linux]] ...| [[Image:Linux-Logo.jpg|200px|link=COMEX-IE38 Intel BayTrail COM Express Linux]]2 KB (257 words) - 13:22, 5 July 2018
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]751 bytes (98 words) - 16:17, 31 August 2015
- ...aced here [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic linux-image-3.16.0-38-generic] * linux_x.y.z.orig.tar.gz - mainline Linux x.y.z sources3 KB (412 words) - 14:48, 31 August 2015
- #REDIRECT [[COMEX-IE38 Intel BayTrail COM Express Linux]]57 bytes (7 words) - 16:08, 31 August 2015
- ...ign="center" width="25%" | [[COMEX-IC50L Intel Broadwell COM Express Linux|Linux]] ...[[Image:Linux-Logo.jpg|200px|link=COMEX-IC50L Intel Broadwell COM Express Linux]]2 KB (276 words) - 11:45, 5 July 2018
- ...-IC50L is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-IC50L capabilities, support for the1 KB (165 words) - 12:43, 10 September 2015
- * The Linux package for COMEX-IC50L includes a ready-to-run image that can be installed ...he [http://compulab.co.il/products/computer-on-modules/comex-ic50l/#devres Linux Package] for COMEX-IC50L to the host PC and ensure the integrity of the fil1 KB (240 words) - 12:50, 10 September 2015
- * COMEX-IC50L supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-IC50L: Linux: Getting started|Getting started with Linux on COMEX-IC50L]]878 bytes (117 words) - 09:22, 10 September 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]759 bytes (105 words) - 09:32, 8 September 2015
- ...align="center" width="25%" | [[COMEX-IC40D Intel Haswell COM Express Linux|Linux]] ...| [[Image:Linux-Logo.jpg|200px|link=COMEX-IC40D Intel Haswell COM Express Linux]]2 KB (259 words) - 13:25, 5 July 2018
- ...-IC40D is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-IC40D capabilities, support for the1 KB (165 words) - 12:49, 10 September 2015
- * The Linux package for COMEX-IC40D includes a ready-to-run image that can be installed ...he [http://compulab.co.il/products/computer-on-modules/comex-ic40d/#devres Linux Package] for COMEX-IC40D to the host PC and ensure the integrity of the fil1 KB (239 words) - 12:50, 10 September 2015
- * COMEX-IC40D supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-IC40D: Linux: Getting started|Getting started with Linux on COMEX-IC40D]]994 bytes (129 words) - 09:21, 10 September 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]757 bytes (105 words) - 08:06, 8 September 2015
- ...X-A420 is a standard PC on x86-64 architecture, you can install any recent Linux Distribution on it. CompuLab chosen Linux Mint distribution to demonstrate COMEX-A420 capabilities, support for the C1 KB (151 words) - 06:38, 10 September 2015
- ..." align="center" width="25%" | [[COMEX-A420 AMD G-Series COM Express Linux|Linux]] ..." | [[Image:Linux-Logo.jpg|200px|link=COMEX-A420 AMD G-Series COM Express Linux]]2 KB (225 words) - 13:23, 5 July 2018
- * The Linux package for COMEX-A420 includes a ready-to-run image that can be installed ...the [http://compulab.co.il/products/computer-on-modules/comex-a420/#devres Linux Package] for COMEX-A420 to the host PC and ensure the integrity of the file1 KB (226 words) - 06:48, 10 September 2015
- * COMEX-A420 supports Linux Mint 17 LTS with full-featured MATE desktop environment * [[COMEX-A420: Linux: Getting started|Getting started with Linux on COMEX-A420]]868 bytes (109 words) - 12:54, 10 September 2015
- ...changelog and deb files can be found in [http://packages.ubuntu.com/trusty/linux-image-3.16.0-38-generic Ubuntu Packages] archive. The kernel can be recompiled with necessary changes like described on [[Linux: Kernel development for x86 modules | Kernel development for x86 modules]]749 bytes (98 words) - 06:21, 10 September 2015
- embedded Linux development. To get the Yocto Project expected behavior in a Linux Host Machine, the packages and utilities described below must be installed.14 KB (2,167 words) - 07:24, 14 June 2016
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux and Android operating systems.<br> ...;" align="center" width="50%" | [[CL-SOM-iMX8 NXP i.MX8M Yocto Linux|Yocto Linux]]3 KB (459 words) - 13:02, 7 August 2019
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux.<br> ...#eeeeee;" align="center" width="25%" | [[CL-SOM-iMX7 Freescale i.MX7 Linux|Linux]]13 KB (1,757 words) - 11:17, 10 May 2020
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux operating system.<br> ...olor: #eeeeee;" align="center" width="50%" | [[CL-SOM-iMX6 NXP i.MX6 Linux|Linux]]3 KB (500 words) - 11:53, 5 July 2018
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux.<br> ...e;" align="center" width="25%" | [[CL-SOM-iMX6UL Freescale i.MX6UL Linux | Linux]]4 KB (570 words) - 12:06, 5 July 2018
- ...with comprehensive documentation and full ready-to-run SW packages for the Linux operating system. ...or: #eeeeee;" align="center" width="25%" | [[CL-SOM-AM57x TI AM57x Linux | Linux]]7 KB (1,065 words) - 12:19, 5 July 2018
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux.<br> ...d-color: #eeeeee;" align="center" width="25%" | [[UCM-iMX7 NXP i.MX7 Linux|Linux]]4 KB (526 words) - 12:32, 5 July 2018
- ...lign="center" width="25%" | [[COMEX-IE38M Intel BayTrail COM Express Linux|Linux]] ...[[Image:Linux-Logo.jpg|200px|link=COMEX-IE38M Intel BayTrail COM Express Linux]]2 KB (270 words) - 13:20, 5 July 2018
- ...gn="center" width="25%" | [[IOT-GATE-iMX7 and SBC-IOT-iMX7 NXP i.MX7 Linux|Linux]] ...dth="25%" | [[IOT-GATE-iMX7 and SBC-IOT-iMX7 NXP i.MX7 Yocto Linux | Yocto Linux]]11 KB (1,381 words) - 11:18, 10 May 2020
- ...kground-color: #eeeeee;" align="center" width="25%" | [[IOT-GATE-RPi Linux|Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=IOT-GATE-RPi Linux]]2 KB (206 words) - 13:35, 5 July 2018
- ...lor: #eeeeee;" align="center" width="25%" | [[SBC-iBT Intel BayTrail Linux|Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=SBC-iBT Intel BayTrail Linux]]1 KB (201 words) - 13:37, 5 July 2018
- | align="" |Linux | align="" |Linux21 KB (2,992 words) - 14:30, 30 August 2023
- ...ided with comprehensive documentation and full ready-to-run SW support for Linux operating system.<br> {{Resources Linux1 KB (173 words) - 12:15, 28 March 2022
- ...ground-color: #eeeeee;" align="center" width="25%" | [[IOT-GATE-RPI4 Linux|Linux]] | align="center" | [[Image:Linux-Logo.jpg|200px|link=IOT-GATE-RPI4 Linux]]2 KB (324 words) - 16:43, 23 November 2022
- |<!--*[[IOT-GATE-RPI4: Linux: Production Deployment|Production Image Deployment]] --> ::- Linux Kernel 5.15.612 KB (295 words) - 16:44, 23 November 2022
