U-Boot for CM-T3530

From Compulab Mediawiki
Jump to: navigation, search

The CompuLab CM-T3530 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-T3530 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

T35 CM top.JPG



U-Boot update to 2014.01-cm-t3x-6:
- Add option to store splash image in MMC
- Fix incorrect environment device selection when boot from alternate storage fails
U-Boot update to 2013.10-cm-t3x-5:
- Add DataImage SCF0403 LCD panel support
- Add USB support
- Fix incorrect message when running saveenv on non-boot storage
U-Boot update to 2013.04-cm-t3x-4: update to mainline 2013.04 and merge with U-Boot for CM-T3730:
- Add DVI splash screen
- Add SD/MMC write protect and card detect
- Add multiple environment support
- Add GPIO user command interface
- Change default NAND flash mapping
U-Boot update to 2012.04.01-cm-t3x-2:
- Add multiple I2C buses support
- Add green LED support
- Changes in various U-Boot commands syntax
- Reduce environment size to speed up operations
X-Loader update to 1.51-cm-t3x-3:
- Add support for various NAND chips
X-Loader update to 1.51-cm-t3x-2:
- Rebased on top of Arago X-Loader v1.51_OMAPPSP_04.02.00.07
- Added support for CB-T3 base board (EM-T35)
- Fixed bug in PRCM initialization resulting in lower DRAM clock frequency
Initial U-Boot release