SB-SOM: Connectors: P8

From Compulab Mediawiki
Revision as of 11:24, 23 May 2016 by Grinberg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

SB-SOM top view
SB-SOM top view
SB-SOM bottom view
SB-SOM bottom view

P8 is an ultra mini serial connector designed to enable serial console communication between the system and a host PC using the RS-232 interface. The following parameters determine whether RS-232 serial console through P8 is enabled.

  1. USB host power availability (through USB cable at connector P7).
  2. Jumper E3 setting.

LED DS2 indicates whether the RS-232 console interface is enabled.


Admolition note.png Please refer to RS-232 console guide for setup of serial communication with your board through RS-232.
Admolition note.png Please refer to SB-SOM carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system.

More Details: connector P7.

Connector Data

P8 connector
Manufacturer MFG P/N
Contact Technology MUSB-8B-D-G-S175-R
P8 mating plugs
Manufacturer MFG P/N
CABDB9UMP RS-232 cable (included with evaluation kit)