SB-SOM: Connectors: J5

From Compulab Mediawiki
Jump to: navigation, search


SB-SOM top view
SB-SOM top view
SB-SOM bottom view
SB-SOM bottom view

Connector J5 is a standard HDMI (output) connector compatible with HDMI/DVI displays. Connector J5 is available only in case parallel RGB interface is available at "PDISP" pins of system-on-module. Connector J5 enables simple connection of DVI/HDMI displays with the system.

Only one of the following SB-SOM display interfaces can be driven with the system-on-module parallel RGB interface at a time. Driving more than one of the below simultaneously is in most cases unsupported.

  • A DVI/HDMI display at connector J5.
  • An LVDS display at connector P11 (if implemented through parallel RGB interface with your specific SB-SOM board).
  • An LCD display at connector P10.

Admolition note.png Selection of the parallel RGB interface path (DVI/LVDS/LCD) must be implemented through system-on-module software.
Admolition note.png Connector J5, although compatible with HDMI displays, implements only DVI data (no audio etc..).
Admolition note.png Please refer to SB-SOM carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system.

More Details: Connector P11, Connector P10.

Connector Data

J5 connector
Manufacturer MFG P/N
J5 mating plugs
Manufacturer MFG P/N
Standard HDMI plug