Difference between revisions of "U-Boot for CM-FX6"

From Compulab Mediawiki
Jump to: navigation, search
 
(Undo revision 9627 by Nikita (Talk))
Line 9: Line 9:
 
|* [[CM-FX6: U-Boot: Firmware Overview|Firmware Overview]]
 
|* [[CM-FX6: U-Boot: Firmware Overview|Firmware Overview]]
 
* [[CM-FX6: U-Boot: Firmware Update|Firmware Update]]
 
* [[CM-FX6: U-Boot: Firmware Update|Firmware Update]]
 +
* [[CM-FX6: U-Boot: Creating a bootable SD card|Creating a bootable SD card]]
 
* [[U-Boot quick reference]]
 
* [[U-Boot quick reference]]
 
|* [[CM-FX6: U-Boot: Building Images|Building Firmware images]]
 
|* [[CM-FX6: U-Boot: Building Images|Building Firmware images]]
Line 19: Line 20:
  
 
{{ChangelogRss| content=
 
{{ChangelogRss| content=
 +
===== 01-Jul-2014 =====
 +
: Added [[CM-FX6: U-Boot: Creating a bootable SD card]] article
  
 
===== 30-Jun-2014 =====
 
===== 30-Jun-2014 =====

Revision as of 12:14, 1 July 2014

The CompuLab CM-FX6 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-FX6 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Cm-fx6-top.jpg


Resources
Evaluation
Development
Troubleshooting


News

01-Jul-2014
Added CM-FX6: U-Boot: Creating a bootable SD card article
30-Jun-2014
Initial release of U-Boot for CM-FX6
U-Boot 2014.04-cm-fx6-1 supports:
- MMC/SD Card
- SPI flash
- Ethernet
- NAND flash
- SATA and on-board SSD
- USB host and USB OTG in host mode
- Multiple I2C buses
- Green LED
- Fix NAND detection issue found in older U-Boot versions