IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS Yocto Linux

From Compulab Mediawiki
Revision as of 09:47, 3 September 2023 by Igor (talk | contribs) (Redirected page to IOT-GATE-IMX8PLUS Yocto Linux)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Redirect page
Jump to: navigation, search
This page contains links to information about Yocto Linux distribution for the Compulab IOT-GATE-IMX8PLUS Internet of Things Gateway and SBC-IOT-IMX8PLUS Single Board Computer.

The Yocto Project is an open-source collaboration focused on embedded Linux development.

Iot-gate-imx8plus.png
Sbc-iot-imx8plus.png


Resources
Evaluation
Development
Application Notes


News

26-Jun-2023, IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux release 2.0
Release of Yocto 4.0 (kirkstone) for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS
- U-Boot 2021.04 based on NXP lf-5.15.32-2.0.0
- Kernel 5.15.32 based on NXP lf-5.15.32-2.0.0
HW Features:
- Added support for SB-IOTGIMX8PLUS EEPROM
- Added support for LED Green_1
- Added support for FCCAN I/O module
- Added support for FXTPM add-on board
- Added support for break-out add-on board
Documentation:
- Updated multiple articles to comply with the new release
10-Oct-2022, IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux release 1.0
Release of Yocto 4.0 (kirkstone) for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS
- U-Boot 2021.04 based on NXP lf_v2021.04
- Kernel 5.15.32 based on NXP lf-5.15.y
HW Features:
- eMMC storage
- USB3.0 Host port
- 2x USB2.0 Host ports
- 2x Ethernet
- WiFi (Intel AX210)
- Bluetooth
- 4G/LTE modem (Quectel EC25E/EC25A)
- 1x CAN 2.0B
- Display output
- Industrial I/O extension modules:
- Up to 3x RS485 / RS232
- Digital I/O( 4x DI, 4x DO)
- RTC
- Watchdog
- 2x dual color user LEDs
- 1x serial console (micro-USB connector)
- USB programming interface for NXP SDP/UUU (micro-USB connector)
SW Features:
- CompuLab Deployment Tool
- Linux CLI utilities for access to U-Boot environment
Documentation:
- Initial Yocto Linux documentation for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS