Difference between revisions of "IOT-GATE-IMX8PLUS: Getting Started"
(Created page with "= Quick Setup = * Connect a USB cable between host PC and IOT-GATE-IMX8PLUS micro-USB console connector. * Insert the AC power-supply blade into the power supply unit. * Inse...") |
(No difference)
|
Revision as of 16:07, 4 July 2022
Contents
Quick Setup
- Connect a USB cable between host PC and IOT-GATE-IMX8PLUS micro-USB console connector.
- Insert the AC power-supply blade into the power supply unit.
- Insert the power supply plug into the IOT-GATE-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
- On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
- Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux.
- Use "root" as a username and "111111" as a password as initial Linux account credentials.
IOT-GATE-IMX8PLUS Overview
Front panel
Back panel
Left and Right panels
Default antenna connector assignment
Connector | Function |
WiFi-A / BT | Wifi / Bluetooth antenna |
WiFi-B | Secondary Wifi antenna |
WWAN | Main LTE antenna |
AUX | Auxiliary GNSS antenna |
Service bay
SIM card installation
- Remove the screw from the SIM/PROG tray-cover
- Insert a SIM removal tool into the cover popping hole to pop the tray-cover
- Place the SIM into the tray
- Carefully push the tray-cover back in
- Close the SIM/PROG cover screw (optional)