IOT-GATE-IMX8PLUS Yocto Linux

This page contains links to information about Yocto Linux distribution for the Compulab IOT-GATE-IMX8PLUS Internet of Things Gateway. The Yocto Project is an open-source collaboration focused on embedded Linux development.

Getting Started		Development		How-to Guides and Application Notes
Evaluation Quick Start Guide Documents and Resources Support Getting Technical Support Engineering Support Portal Useful Links IOT-GATE-IMX8PLUS Product Page Accessories Guide		Building Yocto and U-Boot Setting Up Yocto Build Environment Building IOT-GATE-IMX8PLUS Yocto Linux images Installing Yocto on IOT-GATE-IMX8PLUS Boot Firmware Recovery Common Yocto Build Errors Customizing O/S and Drivers Introduction to Yocto development Making Changes to Yocto Meta-Layers Introduction to Device Trees Creating OTA update enabled images with Mender		Using Interfaces and Functions Serial Console Login Ethernet Cellular Modem WiFi CAN bus RS232 RS485 Modbus Digital I/O LEDs Application Notes Optimizing eMMC lifetime and reliability

Release History RSS Feed

26-Jun-2023, IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux 2.0 ( release notes) Yocto 4.0 (kirkstone) for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS - U-Boot 2021.04 based on NXP lf-5.15.32-2.0.0 - Kernel 5.15.32 based on NXP lf-5.15.32-2.0.0 10-Oct-2022, IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux 1.0 ( release notes) Yocto 4.0 (kirkstone) for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS - U-Boot 2021.04 based on NXP lf_v2021.04 - Kernel 5.15.32 based on NXP lf-5.15.y