Difference between revisions of "CL-SOM-iMX8 NXP i.MX8M Yocto Linux"

Revision as of 12:57, 8 March 2018

This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX8 System-on-Module / Computer-on-Module.

The Yocto Project is an open-source collaboration focused on embedded Linux development.

Resources

Evaluation

Development

Troubleshooting

News

RSS Feed

Initial release of Yocto 2.2 (Morty) for CL-SOM-iMX8

Kernel: 4.9.51

U-Boot: 2017.03

HW supported features:

- Basic support for the CL-SOM-iMX8 module

- SD, USB3.0 Host, USB3.0 device, PCIe, I2C, SPI

- Storage: eMMC, SD

- Display: HDMI

- Ethernet: NXP Ethernet Controller (FEC)

- Wireless: WiFi and Bluetooth (Murata)

- Audio: Analog (WM8731), HDMI and S/PDIF

- RTC (abx80x)

- Heartbeat LED

SW Features:

- Chromium 54.0.2810.2 (64-bit)

- CompuLab Deployment Tool

- CompuLab U-Boot Tool

Documentation:

- Initial Yocto Linux documentation for CL-SOM-iMX8

@@ Line 8: / Line 8: @@
 |* [[CL-SOM-iMX8: Evaluation Kit: Getting Started|Getting started with CL-SOM-iMX8 Evaluation Kit]]
 * [https://github.com/compulab-yokneam/meta-compulab-imx8/wiki/02.-How-To-Create-a-Bootable-SD-card Running CL-SOM-iMX8 Yocto from SD card]
-* [https://github.com/compulab-yokneam/meta-compulab-imx8/wiki/04.-How-To-Install-Yocto-Linux-on-eMMC Installing Yocto images onto CL-SOM-iMX6 eMMC]
+* [https://github.com/compulab-yokneam/meta-compulab-imx8/wiki/04.-How-To-Install-Yocto-Linux-on-eMMC Installing Yocto images onto CL-SOM-iMX8 eMMC]
 |* [https://github.com/compulab-yokneam/meta-compulab-imx8/wiki/01.-Build-CompuLab-Images Building CL-SOM-iMX8 Yocto Linux images]
 |*[[Support]]