- Start terminal emulation software on your PC with the following serial port settings:
| Baud Rate
|
Data Bits
|
Stop Bits
|
Parity
|
Flow Control
|
| 115200
|
8
|
1
|
none
|
none
|
- Plug the installation media (SD/microSD card) to an appropriate socket:
- On a SBC-iMX7 evaluation system socket (P9)
- On a SBC-IOT-iMX7 evaluation system socket (P18)
- On a IOT-GATE-iMX7 socket marked uSD
- On a SBC-UCM evaluation system socket (P8)
- Turn on the evaluation system.
- The system will boot from the SD card and start the automatic installation procedure.
Kernel release : Linux 4.1.15-cl-som-imx7-4.0
===CompuLab Automatic Installation System 1.0.0 (Aug 17 2017)===
Press any key to cancel installation 0
The Automatic Installation Procedure can be terminated by pressing any key during the timeout.
- The installation script performs all required steps including installing Linux images onto internal storage device (eMMC) and setting up the boot environment.
|
The Automatic Installation script cleans up a storage device during the installation procedure. All data stored on the eMMC device will be lost.
|
=== Mount Source /dev/mmcblk0p1 ===
* mount_source [ ]
===Installing OS===
* Updating partitions
* Formatting partitions
* mount_destination [ ]
* Copying kernel files
* Extracting user space rootfs.tar.bz2
156MiB 0:02:31 [1.03MiB/s] [================================>] 100%
* unmount_destination [ ]
=== Unmount Source /dev/mmcblk0p1 ===
* unmount_source [ ]
Please remove installation SD card ...
Press any key to cancel restart 0
...
- The system will reboot automatically to the newly installed Linux. Please reboot manually, if for some reason the system does not reboot automatically.
- Please remember to remove the installation SD card.
