- Start terminal emulation software on your PC with the following serial port settings:
| Baud Rate
|
Data Bits
|
Stop Bits
|
Parity
|
Flow Control
|
| 115200
|
8
|
1
|
none
|
none
|
- Plug the installation media (SD/microSD card) into the SD socket:
- On SBC-iMX7 - SD socket P9
- On SBC-IOT-iMX7 - micro-SD socket P18
- On IOT-GATE-iMX7 - socket marked uSD
- Turn on the system.
- The system will boot from the SD card and start the automatic installation procedure.
Kernel release : Linux 4.14.98-cl-som-imx7-6.3
===CompuLab Automatic Installation System 2.0.1 (Nov 20 2018)===
Press any key to cancel installation 0
The Automatic Installation Procedure can be terminated by pressing any key during the timeout.
- The installation script performs all necessary steps including installing Linux images onto the on-board storage device (eMMC) and setting up the boot environment.
|
The Automatic Installation script deletes the storage device during the installation procedure. All data stored on the eMMC will be lost.
|
=== Installation Target: eMMC ===
* Mounting extra images
* Loading extra modules
===Installing OS===
* Updating partitions
* Formatting partitions
* Copying kernel files
* Extracting user space rootfs.tar.bz2
405MiB 0:06:37 [1.02MiB/s] [================================>] 100%
* Unmounting extra images
Please remove installation SD card ...
Press any key to cancel restart 0
...
- The system will reboot automatically to the newly installed Linux. Please reboot manually, if for some reason the system does not reboot automatically.
- Please remember to remove the installation SD card.
