SB-SOM: Connectors: P5

From Compulab Mediawiki
Revision as of 15:12, 23 May 2016 by Grinberg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

SB-SOM top view
SB-SOM top view
SB-SOM bottom view
SB-SOM bottom view

P5 is a 34pin 100mil header. The P5 connector allows easy, jumper-wire oriented, access to various system signals.

The following groups of system-on-module pins can be accessed through P5:

  1. USBSS - Derived from system-on-module pins 182, 184, 188 & 190.
  2. HSUSB2 - Derived from system-on-module pins 164 & 166.
  3. HSUSB3 - Derived from system-on-module pins 158 & 160.
  4. RTOUCH - Derived from system-on-module pins 66, 68, 70 & 72.
  5. SATA - Derived from system-on-module pins 21, 23, 27 & 29.
  6. MISC - Derived from system-on-module pins 11, 13, 152, 161, 163, 179, 187, & 194.
  7. CAN - Always accessible, this is the physical layer side of the onboard CAN bus transceiver and isolator, allowing direct system connection to a CAN bus.


Admolition note.png Please refer to SB-SOM carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system.

Connector Data

P5 connector
Manufacturer MFG P/N
Jih_Vei_Electronics 21N22564-34M10B-01G-6/1.5 –C