View source for MCM-iMX8M-Mini: Yocto Linux: Installing Yocto images onto MCM-iMX8M-Mini eMMC

Please use the `CompuLab Deployment Tool` to install MCM-iMX8M-Mini Yocto Linux onto on-board eMMC storage.

The `CompuLab Deployment Tool` is a shell script that allows to deploy a working OS image from micro-SD card to MCM-iMX8M-Mini on-board storage (eMMC).

Follow the step-by-step procedure for a selected image:

==Installing Yocto images onto MCM-iMX8M-Mini eMMC==
* Prepare a bootable SD card and use it to boot the system [[MCM-iMX8M-Mini:_Yocto_Linux:_Manual_Installation:_SD_card|as described here]].
* [[MCM-iMX8M-Mini:_Yocto_Linux:_Manual_Installation:_SD_card#Run%20Yocto%20Linux%20image|Run the Yocto Linux image]] that you intend to deploy.
* In the terminal window issue: <pre>cl-deploy</pre>
* Follow the steps below:
</br>
{| width="60%" cellspacing="1" cellpadding="1" border="1"
|-
| align="center" | '''Action''' 
| align="center" | '''Screenshot''' 
|-
|
:Select installation target storage: on MCM-iMX8M-Mini on-board eMMC device is called '''mmcblk2'''
| align="center" | [[File:wayland_cl-deploy_dst_choice.png|400px]]
|-
|
:Be aware of the fact that all the data on the target storage will be erased
| align="center" | [[File:wayland_cl-deploy_last_warning.png|400px]]
|-
|
:While installation process is running the output screen shows the log and progress
| align="center" | [[File:wayland_cl-deploy_process.png|400px]]
|-
|
:When installation is complete, the following message will show up
| align="center" | [[File:wayland_cl-deploy_finish.png|400px]]
|}

==Post installation==
* Reboot the module to boot the newly deployed system.

[[Category:Linux]]
[[Category:Yocto]]
[[Category:MCM-iMX8M-Mini]]