IOT-GATE-iMX8 and SBC-IOT-iMX8 NXP iMX8M-Mini Yocto Linux

This page contains links to information about Yocto Linux distribution for the CompuLab IOT-GATE-iMX8 Internet of Things Gateway and SBC-IOT-iMX8 Single Board Computer. The Yocto Project is an open-source collaboration focused on embedded Linux development.

Resources

Evaluation Getting started with IOT-GATE-iMX8 Installing Yocto on IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux how-to guide for IOT-GATE-iMX8 / SBC-IOT-iMX8 Development Building IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux images Building IOT-GATE-iMX8 / SBC-IOT-iMX8 Linux Kernel Building IOT-GATE-iMX8 / SBC-IOT-iMX8 U-boot image Introduction to Yocto development Making Changes to Yocto Meta-Layers U-Boot Recovery Application Notes Optimizing eMMC lifetime and reliability Creating OTA update enabled images with Mender Enabling secure boot (HAB) in Yocto

Release Notes RSS Feed

15-Jun-2023, IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux release 3.2.1 Release of Yocto 4.0 (Kirkstone) for IOT-GATE-iMX8 / SBC-IOT-iMX8 - Fixed Docker issue 21-May-2023, IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux release 3.2 Release of Yocto 4.0 (Kirkstone) for IOT-GATE-iMX8 / SBC-IOT-iMX8 - Kirkstone Long Term Support - Kernel 5.15.32 - U-Boot 2021.04 - Add support for Intel AX210 WiFi/BT card 09-May-2023, IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux release 3.1.5 Release of Yocto 3.3 (Hardknott) for IOT-GATE-iMX8 / SBC-IOT-iMX8 - Kernel 5.10.72 - U-Boot 2021.04 - Fixed USB power supply reset issue - Enabled root FS journaling - Fixed cpufreq driver issue - Disabled Ethernet PHY clock 125 MHz - Added support for simultaneous operation of two IE-CL420 modules Image build improvement: - Added Linux headers to the image - Migrated from CodeAurora to GitHub Documentation updated 19-Jul-2022, IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux release 3.1 Release of Yocto 3.3 (Hardknott) for IOT-GATE-iMX8 / SBC-IOT-iMX8 - Kernel 5.10.72 - U-Boot 2021.04 - Fix signal configuration of Digital I/O add-on GPIOs - Fix WiFi driver for 4GB RAM configuration - Enable support for FTDI USB to serial driver - Add support for mbpoll ModBus utility - Reduce RTC battery usage when the power supply is disconnected - Store manufacturing details in the device tree - Update the CAN bus driver - Add support to the POE add-on module - Add support for the M4 core - Add support for the IE-CL420 module - Add support for the IE-TPM module - Enable the net filter tables feature - Enable setting the RTC time based on NTP - Enable broadcast manager CAN Protocol - Add the digital I/O add-on input GPIOs as wake-up sources - Add support for the Realtek RTL8211 PHY Documentation: - Initial Yocto Linux documentation for IOT-GATE-iMX8 / SBC-IOT-iMX8 21-Sep-2020, IOT-GATE-iMX8 / SBC-IOT-iMX8 Yocto Linux release 2.0 Release of Yocto 3.0 (Zeus) for IOT-GATE-iMX8 / SBC-IOT-iMX8 - Kernel 5.4.24 - U-Boot 2020.04 HW-supported features: - eMMC storage - USB2.0 Host - Ethernet - WiFi (Intel AX200) - Bluetooth - LTE modem (SIM7600G) - CAN-FD - RS485 - RS232 with flow control - Industrial I/O add-ons - RTC - Industrial I/O extension boards SW Features: - CompuLab Deployment Tool - Linux CLI utilities for access to the U-Boot environment Documentation: - Initial Yocto Linux documentation for IOT-GATE-iMX8 / SBC-IOT-iMX8