IOT-GATE-iMX7 and SBC-IOT-iMX7 NXP i.MX7 U-Boot

The CompuLab CL-SOM-iMX7 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CL-SOM-iMX7 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Resources

Evaluation Firmware Overview Package contents Firmware Update Creating a bootable SD card Basic environment configuration Display and console U-Boot: Quick reference Development Setting up a development environment Introduction to U-Boot development Building Firmware images U-Boot: Images U-Boot documentation Troubleshooting Support Known Issues

News RSS Feed

18-Dec-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.1 U-Boot 2017.07-cl-som-imx7-1.1 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - Added conditional initialization of the base board I2C bus - Improved SPI flash support coverage Documentation - Updated multiple articles to comply with the new U-Boot package 24-Oct-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.0 U-Boot 2017.07-cl-som-imx7-1.0 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - SPL support - Storage: eMMC, MMC/SD Card, SPI flash - Video: DVI Logo with console / Splash screen - EEPROM layout commands - Automatic device tree (dtb) selection - Ethernet - USB 2.0 support - USB keyboard support Documentation - Initial U-Boot documentation for IOT-GATE-iMX7 / SBC-IOT-iMX7