Difference between revisions of "CM-T3730: Linux: Kernel"

From Compulab Mediawiki
Jump to: navigation, search
(Git clone)
(Git clone)
 
(3 intermediate revisions by 3 users not shown)
Line 8: Line 8:
 
The Linux kernel for CM-T3730 is shipped with built-in command line parameters:
 
The Linux kernel for CM-T3730 is shipped with built-in command line parameters:
 
<pre>
 
<pre>
root=/dev/mmcblk0p3 rootwait console=ttyO2,115200 omapfb.mode=dvi:1024x768-24@60 omapfb.vram=1:4M vram=8M
+
root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 omapfb.mode=dvi:1024x768-24@60 omapfb.vram=1:4M vram=8M
 
</pre>
 
</pre>
  
Line 22: Line 22:
 
** [http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/ Sourcery CodeBench Lite]
 
** [http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/ Sourcery CodeBench Lite]
 
* Tools for creating cross-compilers:
 
* Tools for creating cross-compilers:
** [http://ymorin.is-a-geek.org/dokuwiki/projects/crosstool Crosstool-ng]: Builds a cross-compiler from source. Non-distribution specific.
+
** [http://crosstool-ng.org/ Crosstool-ng]: Builds a cross-compiler from source. Non-distribution specific.
 
** [http://www.gentoo.org/proj/en/base/embedded/handbook/index.xml?part=1&chap=4 Crossdev]: Gentoo's cross-compiler builder. Needs Gentoo.
 
** [http://www.gentoo.org/proj/en/base/embedded/handbook/index.xml?part=1&chap=4 Crossdev]: Gentoo's cross-compiler builder. Needs Gentoo.
  
Line 42: Line 42:
 
There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 
There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 
==== Snapshot download ====
 
==== Snapshot download ====
* Download [http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=snapshot;h=091ce3d38e5e57cf7dd44d66335725910e928f59;sf=tgz v3.0.32] snapshot with your web browser. Note, that tools like {{cmd|wget}} and {{cmd|curl}} will not work here.
+
* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.87.tar.bz2 v3.0.87] snapshot with your web browser.
* Extract the downloaded archive {{filename|linux-stable-091ce3d.tar.gz}}
+
* Extract the downloaded archive {{filename|linux-3.0.87.tar.bz2}}
 
<pre>
 
<pre>
 
cd /home/development/cm-t3730/kernel
 
cd /home/development/cm-t3730/kernel
tar xzvf /path/to/downloaded/linux-stable-091ce3d.tar.gz
+
tar xvf /path/to/downloaded/linux-3.0.87.tar.bz2
mv linux-stable-091ce3d linux-cm-t3730
+
mv linux-3.0.87 linux-cm-t3730
 
</pre>
 
</pre>
 
: This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
 
: This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
Line 53: Line 53:
 
<pre>
 
<pre>
 
cd /home/development/cm-t3730/kernel/linux-cm-t3730
 
cd /home/development/cm-t3730/kernel/linux-cm-t3730
patch -p1 < /path/to/t3730-linux/kernel/linux-3.0.32-cm-t3730-2.patch
+
patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.87-cm-t3730-6.patch
 
</pre>
 
</pre>
  
Line 63: Line 63:
 
git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 
git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 
</pre>
 
</pre>
* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.32 tag (091ce3d38e5e57cf7dd44d66335725910e928f59 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
+
* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.87 tag (61bfa77de71ef9d84614d3a7f0a3ca1c7af82058 commit) in the Linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
 
<pre>
 
<pre>
git checkout -b cm-t3730-dev v3.0.32
+
git checkout -b cm-t3730-dev v3.0.87
 
</pre>
 
</pre>
 
* Apply the CM-T3730 patch
 
* Apply the CM-T3730 patch
 
<pre>
 
<pre>
 
cd /home/development/cm-t3730/kernel/linux-cm-t3730
 
cd /home/development/cm-t3730/kernel/linux-cm-t3730
git apply /path/to/t3730-linux/kernel/linux-3.0.32-cm-t3730-2.patch
+
git apply /path/to/cm-t3730-linux/kernel/linux-3.0.87-cm-t3730-6.patch
 
</pre>
 
</pre>
  

Latest revision as of 09:39, 29 July 2013

Overview

Linux kernel for CM-T3730 modules provides support for on-board peripherals and abstracts the functionality provided by the hardware. Current support coverage is specified at O/S support coverage map page. CompuLab provides ready-to-run binary kernel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3730 modules. Most of the CM-T3730 functionality is merged into the mainline kernel starting from 3.1 release.

Kernel command line

The Linux kernel for CM-T3730 is shipped with built-in command line parameters:

root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 omapfb.mode=dvi:1024x768-24@60 omapfb.vram=1:4M vram=8M

The default kernel command line defines primary console, default display settings, root device and root filesystem type.
Setting U-Boot bootargs environment variable overrides default kernel command line and can be used to set desired kernel parameters.


Admolition note.png If the MMC/SD Card is used as your root filesystem device, Linux kernel command line must have the following parameter appended: mmc_core.removable=0

Building kernel for CM-T3730

Cross-Compiler

There are several options for cross-compilation toolchain setup. You can either compile your cross-compiler or use an already built cross-compiler. The cross-compiler should support the ARM embedded-application binary interface ("EABI")

  • Pre-built toolchain (recommended):
  • Tools for creating cross-compilers:
    • Crosstool-ng: Builds a cross-compiler from source. Non-distribution specific.
    • Crossdev: Gentoo's cross-compiler builder. Needs Gentoo.

U-Boot mkimage tool

U-Boot mkimage utility is required in order to create kernel images that can be loaded by the CM-T3730 bootloader. You can download prebuilt mkimage binary or build it yourself:

mkdir ~/tmp
cd tmp
wget ftp://ftp.denx.de/pub/u-boot/u-boot-latest.tar.bz2
tar -xjvf u-boot-latest.tar.bz2
cd u-boot-<version>
touch include/config.{h,mk}
make tools
sudo install tools/mkimage /usr/local/bin

Getting kernel sources

There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created /home/development/cm-t3730/kernel directory for CM-T3730 kernel development.

Snapshot download

  • Download v3.0.87 snapshot with your web browser.
  • Extract the downloaded archive linux-3.0.87.tar.bz2
cd /home/development/cm-t3730/kernel
tar xvf /path/to/downloaded/linux-3.0.87.tar.bz2
mv linux-3.0.87 linux-cm-t3730
This will create /home/development/cm-t3730/kernel/linux-cm-t3730 directory containing linux kernel tree.
  • Apply the CM-T3730 patch
cd /home/development/cm-t3730/kernel/linux-cm-t3730
patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.87-cm-t3730-6.patch

Git clone

  • Install git version control system.
  • Create a clone of linux kernel tree
cd /home/development/cm-t3730/kernel
git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
  • Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.87 tag (61bfa77de71ef9d84614d3a7f0a3ca1c7af82058 commit) in the Linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
git checkout -b cm-t3730-dev v3.0.87
  • Apply the CM-T3730 patch
cd /home/development/cm-t3730/kernel/linux-cm-t3730
git apply /path/to/cm-t3730-linux/kernel/linux-3.0.87-cm-t3730-6.patch


Admolition note.png Future stable kernel versions of 3.0 can also be used by checking out any later tag of v3.0.y stable kernel tree.

Building the kernel

export ARCH=arm
export CROSS_COMPILE=arm-none-linux-eabi-
make cm_t3730_defconfig
make menuconfig
make && make uImage && \
     INSTALL_MOD_PATH=/home/development/cm-t3730/rootfs make modules_install

In the example above, the Linux kernel image (uImage) will be created in /home/development/cm-t3730/kernel/linux-cm-t3730/arch/arm/boot, and the loadable kernel modules will be installed into the /home/development/cm-t3730/rootfs/lib/modules directory.
When the CM-T3730 is booted with the kernel image created as described above and with networked root filesystem at /home/development/cm-t3730/rootfs/, the system will be able to load the kernel modules properly, thus avoiding module version problems.

See also