Difference between revisions of "CL-SOM-iMX6: Evaluation Kit: Getting Started"

From Compulab Mediawiki
Jump to: navigation, search
 
 
(One intermediate revision by the same user not shown)
Line 20: Line 20:
  
 
== What Next? ==
 
== What Next? ==
 +
* [[CL-SOM-iMX6 NXP i.MX6 Linux|CL-SOM-iMX6 Linux guide]]
 
<!--
 
<!--
* [[CL-SOM-iMX6 NXP i.MX6 Linux|CL-SOM-iMX6 Linux guide]]
 
 
* [[CL-SOM-iMX6 NXP i.MX6 Yocto Linux|CL-SOM-iMX6 Yocto Linux guide]]
 
* [[CL-SOM-iMX6 NXP i.MX6 Yocto Linux|CL-SOM-iMX6 Yocto Linux guide]]
 
-->
 
-->
 
* [[CL-SOM-iMX6: Evaluation Kit: Hardware Guide|CL-SOM-iMX6 evaluation kit hardware guide]]
 
* [[CL-SOM-iMX6: Evaluation Kit: Hardware Guide|CL-SOM-iMX6 evaluation kit hardware guide]]
* [http://www.compulab.co.il/products/computer-on-modules/cl-som-imx6-nxp-freescale-i-mx-6-system-on-module/#devres CL-SOM-iMX6 development resources]
+
* [http://www.compulab.com/products/computer-on-modules/cl-som-imx6-nxp-freescale-i-mx-6-system-on-module/#devres CL-SOM-iMX6 development resources]
  
 
[[Category:SB-FX6]]
 
[[Category:SB-FX6]]
 
[[Category:CL-SOM-iMX6]]
 
[[Category:CL-SOM-iMX6]]

Latest revision as of 14:39, 4 June 2017

CL-SOM-iMX6-eval-kit-quick-setup.jpg

SB-FX6 top view
SB-FX6 top view
SB-FX6 bottom view
SB-FX6 bottom view

System setup

CL-SOM-iMX6 evaluation kit is preloaded with Debian Linux image for CL-SOM-iMX6.

  1. Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
  2. Connect a USB Keyboard to USB connector P13.
  3. Make sure jumpers P31, E5 and E1 are not populated (default state).
  4. Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P20.
  5. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none

Starting the system

  1. Connect the DC 12V power supply adapter (included) to main DC power connector - J4.
  2. Follow the messages in your terminal emulator program until you see the linux login prompt.
Admolition note.png In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.

What Next?