View source for CL-SOM-AM57x: Linux: Manual Installation: destination: eMMC

== Introduction ==
This article provides an introduction on how to install the Linux kernel and the example root filesystem image on the CompuLab CL-SOM-AM57x System-on-Module / Computer-on-Module eMMC internal storage using one of the following sources:
* SD card
* USB storage device
* Network interface

{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: Preparation}}
{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: boot ramdisk}}
{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: mount source}}
{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: Install Images: eMMC}}
{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: After Installation: default}}
* Select the eMMC as the boot storage
<blockquote><pre>
U-Boot# setenv bootcmd 'run emmcboot'
</pre></blockquote>
{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: After Installation: Select video output}}
{{:Transclusion: CL-SOM-AM57x: Linux: Manual Installation: boot}}

== See also ==
* [[CL-SOM-AM57x: Linux: Automatic Installation]]
* [[CL-SOM-AM57x: Linux: Manual Installation: destination: SATA]]
* [[CL-SOM-AM57x: Linux: Debian]]
* [[CL-SOM-AM57x: Linux: Kernel]]
* [[Linux Development for ARM modules]]

[[Category:Linux]]
[[Category:CL-SOM-AM57x]]