Difference between revisions of "CL-SOM-AM57x: Linux: Automatic Installation"
(→See also) |
(→Preparation steps) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 4: | Line 4: | ||
== Preparation steps == | == Preparation steps == | ||
* Obtain a PC workstation with a serial communication port or a free USB 2.0 Host port. | * Obtain a PC workstation with a serial communication port or a free USB 2.0 Host port. | ||
| − | * Download the Linux package for CL-SOM-AM57x from [http://www.compulab. | + | * Download the Linux package for CL-SOM-AM57x from [http://www.compulab.com/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/#devres CompuLab website]. Unzip the package to a directory on your host workstation. |
| − | * Copy the | + | * Copy the content of the package folder {{filename|install}} to the SD card. |
| − | |||
| − | |||
| − | |||
== Automatic Installation == | == Automatic Installation == | ||
Latest revision as of 07:58, 6 June 2017
Introduction
This article provides an installation guide for Linux kernel and Debian root file system on the CompuLab CL-SOM-AM57x System-on-Module / Computer-on-Module eMMC internal storage device.
Preparation steps
- Obtain a PC workstation with a serial communication port or a free USB 2.0 Host port.
- Download the Linux package for CL-SOM-AM57x from CompuLab website. Unzip the package to a directory on your host workstation.
- Copy the content of the package folder install to the SD card.
Automatic Installation
- Connect the host PC to the SB-SOM-AM57x base-board (connector P8) via the serial cable supplied with the evaluation kit.
|
SB-SOM-AM57x base-board features Serial-to-USB adapter available through connector P7. It can be used as an alternative debug port to connect the Host PC via the micro-USB cable supplied with the evaluation kit |
- Start terminal emulation software on your PC with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
- Insert the MMC/SD card into the MMC/SD socket (P9) on the SB-SOM-AM57x baseboard.
- Turn on the CL-SOM-AM57x evaluation system.
- The system will boot from the SD card and start the automatic installation procedure.
Press any key to cancel installation 0 Install... Updating partitions... [ 13.784919] mmcblk0: p1 p2 Format partitions ... [ 19.328976] random: mkfs.ext4 urandom read with 41 bits of entropy available Mounting partitions ... Copy kernel files ... Extract user space ... [ 30.187868] random: nonblocking pool is initialized Mounting update disk ... Update user space file system... Please remove installation SD card ... Press any key to cancel restart 0 [ 278.026487] EXT4-fs (ram0): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot [ 280.068187] reboot: Restarting system
- The system will reboot automatically to the newly installed Debian Linux.
- Please remember to remove the installation SD card to prevent re-installation.
Troubleshooting
- Automatic installation doesn't start.
The U-Boot environment should be set to default:
- Power on the board.
- Press and hold Ctrl-C to get command prompt.
- Set default U-Boot environment and boot the board:
# env default -a # boot
