(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
- This article provides instructions needed to install the Debian Linux image onto the internal storage.
- The recommended installation procedure is using a host PC with a Debian-based operating system.
sudo cl-deploy
- Select /dev/mmcblk0 as a destination device
Select a destination device
─────────────────────────────────────────────────────────────────────────────────────────
┌─────────────────────────────────────────────────────────────────────┐
│ Available Devices: │
│ ┌─────────────────────────────────────────────────────────────────┐ │
│ │ │ │
│ │ (*) /dev/mmcblk0 │ │
│ │ │ │
│ └─────────────────────────────────────────────────────────────────┘ │
│ < OK > <Cancel> │
└─────────────────────────────────────────────────────────────────────┘
- The following warning message will show up.
┌──────────────────────────── WARNING ────────────────────────────────┐
│ Src: /dev/sda -> Dst: /dev/mmcblk0 │
│ │
│ All data on /dev/mmcblk0 will be destroyed │
│ │
│─────────────────────────────────────────────────────────────────────│
│ < Yes > < No > │
└─────────────────────────────────────────────────────────────────────┘
- Confirm installation onto internal media by choosing Yes
- When installation is complete, the following message will show up:
Finished with success
─────────────────────────────────────────────────────────────────────────────────────────
┌─────────────────────────────────────────────────────────────────────┐
│ Boot media has been deployed on /dev/mmcblk0 │
│ │
│ Would you like to reboot the device now? │
│ │
│─────────────────────────────────────────────────────────────────────│
│ < Yes > < No > │
└─────────────────────────────────────────────────────────────────────┘
- Press Yes to reboot the device to internal storage, unplug installation media when boot loader starts