IOT-GATE-iMX8: Getting Started
Revision as of 15:38, 26 April 2020 by imported>Igor.vaisbein (Created page with "== IOT-GATE-iMX8 Overview == === Front and Rear panels === : 1400px === Left and Right panels === : Image:Iot-gate-imx8 l...")
Contents
IOT-GATE-iMX8 Overview
Front and Rear panels
Left and Right panels
Default antenna connector assignment
Connector | Function |
---|---|
ANT1 | WiFi/BT AUX antenna |
ANT2 | WiFi/BT MAIN antenna |
ANT3 | Modem GNSS antenna |
ANT4 | Modem MAIN antenna |
Service bay
Quick Setup
- Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
- Insert the AC power-supply blade into the power supply unit.
- Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
- On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
- Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
- Use "compulab" as a username and "compulab" as a password as initial Linux account credentials.