Linux Kernel for CM-X270
Contents
Overview
Linux kernel for CM-X270 modules provides support for on-board peripherals. Current support coverage is specified at O/S support coverage map page. CompuLab provides ready-to-run binary kernel images, and source code of the modifications and additions made to the Linux kernel to work properly on CM-X270 modules.
Changelog
Linux kernel 2.6.16
- 26-Dec-07
- Certain NAND flashes are sensitive to local bus activity. NAND flash driver updated to overcome this limitation.
- 13-Jun-07
- Fixed RTC access routines.
- 06-Feb-06
- Added pcibios_set_master for ARM platforms with ITE8152 bridge. This allows proper setting of latency timer for PCI bus masters behind the bridge.
- 12-Oct-06
- Added ability to specify wireless access point MAC address
- Added MMC support
- Serial tty assignment made compatible for CM-X270L and CM-X270W. From now, ttySA0 is default console on both CM-X270L and CM-X270W.
- Fixed wireless LAN driver bug that caused incorrect transmission power setting
- 15-Aug-06
- Added BGW200 Wireless LAN support
- 15-May-06
- Initial release of Linux 2.6.16:
- - Power management support
- - Added CardBus support
- - Added 2700G frame buffer device driver
- - Audio support upgraded to work with ALSA, added recording support
Linux kernel 2.6.12
- 16-Mar-06
- Improved flash driver: better reliability, write performance and load distribution during writes
- 27-Feb-06
- Updated LCD controller support to match CM-X270W rev 1.2
- Fixed LCD timings for 800x600 in 2.6.12.2
- Added support for IDE and CardBus on SB-X270
- CL_FlashDrv.o renamed to CL_FlashDrv
- 03-Jan-2005
- Changed toolchain recommendation, and updated usage instructions accordingly
- 14-Nov-2005
- Initial revision: 2.6.12.2 kernel release for CM-X270
Building Linux kernel for CM-X270
Instructions for building Linux kernel for CM-X270 can be found here.
