CM-QS600: Android: Serial console connection

From Compulab Mediawiki
Revision as of 08:49, 21 September 2015 by Andreyg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

By default, the serial console provides access to

  • kernel console
  • bootloader command line interface

Routing

The serial console is routed, via serial to USB converter, to (P16) mini-USB jack.
The line speed is pre-set to 115200 bps.

Software configuration

Below provided directions for configuring PuTTY (or its fork project KiTTY).
Notice, on Ubuntu Linux, the user running PuTTY might be required to belong to dialout user group.

  • Launch PuTTY.
  • Change the Connection type to Serial.
  • Set the following configuration options:
    • Serial line
    • Speed

PuTTY-1-options.jpg

  • From the Connection menu on the left, select Serial
  • Select a serial line:
    Select a serial line associated with the connected device, which most probably will not be COM1.
  • Configure the serial line:
    • Speed (baud): 115200
    • Data bits: 8
    • Stop bits: 1
    • Parity: none
    • Flow control: none

PuTTY-2-config.jpg

  • Click Open.


At this point PuTTY is configured, its terminal should display the serial console.