Difference between revisions of "IOT-GATE-iMX8: Getting Started"
imported>Igor.vaisbein (→Default antenna connector assignment) |
|||
Line 9: | Line 9: | ||
</blockquote> | </blockquote> | ||
* Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux. | * Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux. | ||
− | * | + | * To login into Linux use "compulab" as username and set the password per first login instructions. |
= IOT-GATE-iMX8 Overview = | = IOT-GATE-iMX8 Overview = |
Revision as of 08:20, 25 October 2022
Contents
Quick Setup
- Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
- Insert the AC power-supply blade into the power supply unit.
- Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
- On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
- Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
- To login into Linux use "compulab" as username and set the password per first login instructions.
IOT-GATE-iMX8 Overview
Front and Rear panels
Left and Right panels
Default antenna connector assignment
Connector | Function |
---|---|
ANT1 | WiFi/BT antenna |
ANT2 | WiFi antenna |
ANT3 | Modem GNSS antenna |
ANT4 | Modem MAIN antenna |