|
|
| (10 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − | == Cross-Compilation ==
| + | #REDIRECT [[Linux: Development for ARM modules]] |
| − | | |
| − | In the embedded world, software development is almost always done on a system other than the one on which the software will eventually run. It is common nowadays to use x86 desktop workstations to develop software for ARM-based embedded products. Such an approach requires cross-compilation tools and environment.
| |
| − | | |
| − | Building a cross compiler became recently relatively simple thanks to such tools as [http://www.kegel.com/crosstool/ crosstool]. But working cross-compiler is not enough. Modern applications rely on variety of libraries, frameworks and utilities. All these has to be cross-compiled also. Most Linux and Open Source software projects use a {{cmd|1=configure}} script to configure their software for compilation. Configure is meant to ease configuring the software for compilation and its default assumption is that the software will be run in the same environment and processor in which it was compiled and run from the place in which it was installed. The second problem of many configure scripts, is that most application developers don't take cross-compilation into account, so {{cmd|1=configure}} ends up cross-compiling test code and trying to run it on the build host, which breaks the configuration. Thus, cross compilation tools are not enough for embedded application development and complete cross-development environment is required.
| |
| − | | |
| − | Nowadays, there are several popular cross-development environments: [http://www.scratchbox.org Scratchbox], [http://www.openembedded.org OpenEmbedded], it's spin-off [http://www.pokylinux.org/ Poky Linux], and [http://www.denx.de/wiki/DULG/ELDK Embedded Linux Development Kit].
| |
| − | | |
| − | === Scratchbox ===
| |
| − | Scratchbox is a chrooted cross-compilation environment. This means one has to log into the Scratchbox like one would log into a real machine. Once you logged in, you develop your application as if you were developing it on native ARM machine, but with computational power of modern x86 workstation.
| |
| − | | |
| − | === OpenEmbedded ===
| |
| − | OpenEmbedded is a development environment allowing users to target a wide variety of devices and configurations. OpenEmbedded enables you to build an entire Linux distribution optimized for specific device needs. Additionally, it includes [http://www.openembedded.org/user-manual&dpage=usage_devshell devshell] addon that provides you with an interactive shell with all the appropriate variables set for cross-compiling.
| |
| − | | |
| − | === Poky Linux ===
| |
| − | Poky is an embedded Linux build system, distribution and developer environment which builds upon OpenEmbedded technologies. It is less generic than OpenEmbedded, but on the other side, you may find it more tuned and optimized for such devices as PDAs and smartphones.
| |
| − | | |
| − | === ELDK ===
| |
| − | Embedded Linux Development Kit (ELDK) is a collection of GNU cross development tools, such as compilers, binutils, gdb, etc., and a number of pre-built target tools and libraries necessary to provide some functionality on the target system. It is not full-featured cross-development environment like Scratchbox, OpenEmbedded, or Poky, but it is known to have stable and reliable cross compilation tools.
| |
| − | | |
| − | == Networked Root Filesystem ==
| |
| − | It is convenient to use the same filesystem on host workstation and target device. Because the filesystem exists on the workstation, it is easy to use it for cross-development. And because the workspace is mounted on the target device also, we can test code developed on the host by running it on the target device.
| |
| − | | |
| − | The host workstation need to have NFS server packages installed. The package name depends on the distribution you use:
| |
| − | | |
| − | '''Ubuntu/Debian'''
| |
| − | <pre>
| |
| − | apt-get install nfs-kernel-server nfs-common portmap
| |
| − | </pre>
| |
| − | | |
| − | '''Fedora Core'''
| |
| − | <pre>
| |
| − | yum install nfs-utils
| |
| − | </pre>
| |
| − | | |
| − | '''Gentoo'''
| |
| − | <pre>
| |
| − | emerge -av nfs-utils
| |
| − | </pre>
| |
| − | | |
| − | After the NFS tools are installed on the host workstation, you can use {{filename|1=images/angstrom-em-x270.tar.bz2}} from [http://www.compulab.co.il/x270em/download/x270-em-linux.zip EM-X270 Linux package] and {{filename|1=debian-image.tar.bz2}} from [http://www.compulab.co.il/x270cm/download/x270-linux-img.zip CM-X270 Linux package] or [http://www.compulab.co.il/x270cm/download/x300-linux.zip CM-X300 Linux package] for networked root
| |
| − | filesystem. Extract filesystem the archive to some directory:
| |
| − | | |
| − | <pre>
| |
| − | mkdir /home/development/em-x270/rootfs
| |
| − | cd /home/development/em-x270/rootfs
| |
| − | </pre>
| |
| − | | |
| − | For EM-X270:
| |
| − | <pre>
| |
| − | tar xjf /path/to/em-x270-package/images/angstrom-em-x270.tar.bz2
| |
| − | </pre>
| |
| − | | |
| − | For CM-X300:
| |
| − | | |
| − | <pre>
| |
| − | tar xjf /path/to/cm-x300-package/images/debian-image.tar.bz2
| |
| − | </pre>
| |
| − | | |
| − | And for CM-X270:
| |
| − | | |
| − | <pre>
| |
| − | tar xjf /path/to/cm-x270-package/debian-image.tar.bz2
| |
| − | </pre>
| |
| − | | |
| − | Afterwards add this directory to {{filename|1=/etc/exports}}:
| |
| − | <pre>
| |
| − | /home/development/em-x270/rootfs \
| |
| − | 192.168.0.0/255.255.255.0(no_root_squash,sync,rw)
| |
| − | </pre>
| |
| − | | |
| − | and make the NFS server export this directory:
| |
| − | | |
| − | <pre>
| |
| − | /usr/sbin/exportfs -a
| |
| − | </pre>
| |
| − | | |
| − | Linux kernel has '''Root on NFS''' feature, allowing mounting root filesystem form a server rather than from local storage device. Default kernels shipped by CompuLab have this feature built in. If you are planing to use custom kernel you can enable '''Root on NFS''' as follows: in the kernel configuration choose '''"Networking -> Networking Options"''' menu and enable '''"IP: kernel level autoconfiguration"'''
| |
| − | | |
| − | <pre>
| |
| − | +-------------------------- Networking options ---------------------------+
| |
| − | | Arrow keys navigate the menu. <Enter> selects submenus --->. |
| |
| − | | Highlighted letters are hotkeys. Pressing <Y> includes, <N> excludes, |
| |
| − | | <M> modularizes features. Press <Esc><Esc> to exit, <|> for Help, </> |
| |
| − | | for Search. Legend: [*] built-in [ ] excluded <M> module < > |
| |
| − | | +---------------------------------------------------------------------+ |
| |
| − | | | [ ] Network packet debugging | |
| |
| − | | | <*> Packet socket | |
| |
| − | | | [ ] Packet socket: mmapped IO | |
| |
| − | | | <*> Unix domain sockets | |
| |
| − | | | < > Transformation user configuration interface | |
| |
| − | | | [ ] Transformation sub policy support (EXPERIMENTAL) | |
| |
| − | | | < > PF_KEY sockets | |
| |
| − | | | [*] TCP/IP networking | |
| |
| − | | | [ ] IP: multicasting | |
| |
| − | | | [ ] IP: advanced router | |
| |
| − | | | [*] IP: kernel level autoconfiguration | |
| |
| − | | | [*] IP: DHCP support (NEW) | |
| |
| − | | | [*] IP: BOOTP support (NEW) | |
| |
| − | | | [ ] IP: RARP support (NEW) | |
| |
| − | | | < > IP: tunneling | |
| |
| − | | | < > IP: GRE tunnels over IP | |
| |
| − | | | [ ] IP: ARP daemon support (EXPERIMENTAL) | |
| |
| − | | | [ ] IP: TCP syncookie support (disabled per default) | |
| |
| − | | +----v(+)-------------------------------------------------------------+ |
| |
| − | +-------------------------------------------------------------------------+
| |
| − | | <Select> < Exit > < Help > |
| |
| − | +-------------------------------------------------------------------------+
| |
| − | </pre>
| |
| − | | |
| − | Afterwards choose '''"File Systems -> Network File Systems"''' menu and enable NFS options:
| |
| − | <pre>
| |
| − | +------------------------- Network File Systems --------------------------+
| |
| − | | Arrow keys navigate the menu. <Enter> selects submenus --->. |
| |
| − | | Highlighted letters are hotkeys. Pressing <Y> includes, <N> excludes, |
| |
| − | | <M> modularizes features. Press <Esc><Esc> to exit, <|> for Help, </> |
| |
| − | | for Search. Legend: [*] built-in [ ] excluded <M> module < > |
| |
| − | | +---------------------------------------------------------------------+ |
| |
| − | | | <*> NFS file system support | |
| |
| − | | | [*] Provide NFSv3 client support | |
| |
| − | | | [ ] Provide client support for the NFSv3 ACL protocol extensi| |
| |
| − | | | [ ] Provide NFSv4 client support (EXPERIMENTAL) | |
| |
| − | | | [*] Allow direct I/O on NFS files | |
| |
| − | | | <M> NFS server support | |
| |
| − | | | [*] Provide NFSv3 server support | |
| |
| − | | | [ ] Provide server support for the NFSv3 ACL protocol extensi| |
| |
| − | | | [ ] Provide NFSv4 server support (EXPERIMENTAL) | |
| |
| − | | | [*] Provide NFS server over TCP support | |
| |
| − | │ │ [*] Root file system on NFS │ │
| |
| − | | +----v(+)-------------------------------------------------------------+ |
| |
| − | +-------------------------------------------------------------------------+
| |
| − | | <Select> < Exit > < Help > |
| |
| − | +-------------------------------------------------------------------------+
| |
| − | </pre>
| |
| − | | |
| − | After the kernel is built it can be loaded with
| |
| − | | |
| − | <pre>
| |
| − | root=/dev/nfs nfsroot=<serverip>:/path/to/nfsroot
| |
| − | </pre>
| |
| − | | |
| − | options and access the filesystem on the host workstation and used for software development.
| |
| − | More information about how to use NFS root can be found in {{filename|1=Documentation/nfsroot.txt}} in the Linux kernel source tree.
| |
| − | | |
| − | == Building the Linux kernel for XScale modules ==
| |
| − | There may be cases when default kernel for device does not fit your system requirements and you would like to build your own kernel. Both EM-X270 and CM-X270 platforms are supported by vanilla kernel starting from version 2.6.23 and 2.6.24 respectively. Yet, the support present there is incomplete and does not include several features. This features can be enabled if you apply EM-X270 (or CM-X270) patchset to vanilla kernel and make proper kernel configuration.
| |
| − | | |
| − | Keep in mind that to build Linux kernel for CM-X270 and EM-X270 you need cross-compilation toolchain and for EM-X270 you will also need {{cmd|1=mkimage}} utility from [http://www.denx.de/wiki/UBoot/WebHome U-Boot].
| |
| − | | |
| − | Below is a brief description of Linux kernel build process for CompuLab Xscale modules along with an example commands sequence.
| |
| − | | |
| − | * Download Linux kernel source from preferred mirror
| |
| − | * Unpack it to some directory
| |
| − | * Apply EM-X270 or CM-X270 patchset
| |
| − | * Set environment variables ARCH, and CROSS_COMPILE so that kernel build system cross compile the kernel
| |
| − | * Build the kernel, and modules
| |
| − | * Install the modules
| |
| − | | |
| − | === Building the Linux kernel for EM-X270 ===
| |
| − | | |
| − | <pre>
| |
| − | mkdir /home/development/em-x270/kernel
| |
| − | cd /home/development/em-x270/kernel
| |
| − | wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.23.tar.bz2
| |
| − | tar xjf linux-2.6.23.tar.bz2
| |
| − | cd linux-2.6.23
| |
| − | cat /path/to/x270em-linux-img/kernel/linux-2.6.23-em-x270.patch | patch -p1
| |
| − | export ARCH=arm
| |
| − | export CROSS_COMPILE=arm-linux-
| |
| − | make em_x270_defconfig
| |
| − | make menuconfig
| |
| − | make && make uImage && \
| |
| − | INSTALL_MOD_PATH=/home/development/em-x270/rootfs make modules_install
| |
| − | </pre>
| |
| − | | |
| − | In the above example, the Linux kernel image ({{filename|1=uImage}}) will be created in {{filename|1=/home/development/em-x270/kernel/linux-2.6.23/arch/arm/boot}}, and the loadable kernel modules will be installed into the {{filename|1=/home/development/em-x270/rootfs/lib/modules}} directory.
| |
| − | | |
| − | Now, if you boot EM-X270 with newly created kernel image and with networked root filesysem at {{filename|1=/home/development/em-x270/rootfs/}} the system will be able to properly load kernel modules and you avoid modules versioning problems.
| |
| − | | |
| − | === Building the Linux kernel for CM-X270 ===
| |
| − | | |
| − | <pre>
| |
| − | mkdir /home/development/cm-x270/kernel
| |
| − | cd /home/development/cm-x270/kernel
| |
| − | wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2
| |
| − | tar xjf linux-2.6.24.tar.bz2
| |
| − | cd linux-2.6.24
| |
| − | cat /path/to/x270cm-linux-drv/2.6.24/linux-2.6.24-cm-x270.patch | patch -p1
| |
| − | export ARCH=arm
| |
| − | export CROSS_COMPILE=arm-linux-
| |
| − | make cm_x270_defconfig
| |
| − | make menuconfig
| |
| − | make && \
| |
| − | INSTALL_MOD_PATH=/home/development/cm-x270/rootfs make modules_install
| |
| − | </pre>
| |
| − | | |
| − | In the above example, the Linux kernel image ({{filename|1=zImage}}) will be created in {{filename|1=/home/development/cm-x270/kernel/linux-2.6.24/arch/arm/boot}}, and the loadable kernel modules will be installed into the {{filename|1=/home/development/cm-x270/rootfs/lib/modules}} directory.
| |
| − | | |
| − | Now, if you boot CM-X270 with newly created kernel image and with networked root filesysem at {{filename|1=/home/development/cm-x270/rootfs/}} the system will be able to properly load kernel modules and you avoid modules versioning problems.
| |
| − | | |
| − | == Creating NAND flash images ==
| |
| − | | |
| − | === JFFS2 images ===
| |
| − | | |
| − | To create JFFS2 images you need to have MTD utilities on your host workstation. They are available as binary package in [http://packages.debian.org/stable/utils/mtd-tools Debian]/[http://packages.ubuntu.com/search?keywords=mtd-tools Ubuntu] and probably other distributions, or can be downloaded from [http://www.linux-mtd.infradead.org/ MTD website].
| |
| − | | |
| − | After the MTD utilties are set up use the following commands to create JFFS2 image:
| |
| − | | |
| − | <pre>
| |
| − | mkfs.jffs2 --no-cleanmarkers --pad --eraseblock=0x20000 --root=/home/development/cm-x270/rootfs --output=/path/to/tmp_image.jffs2
| |
| − | sumtool --no-cleanmarkers --pad --eraseblock=0x20000 --input=/path/to/tmp_image.jffs2 --output=/path/to/image.jffs2
| |
| − | </pre>
| |
| − | | |
| − | The {{filename|image.jffs2}} is ready to be transfered to the device NAND flash.
| |
| − | | |
| − | === Legacy images ===
| |
| − | | |
| − | <pre>
| |
| − | cd /path/to/new/image/
| |
| − | | |
| − | # Create temporary directories
| |
| − | mkdir –p /tmp/destimg
| |
| − | | |
| − | # Create a placeholder for the new image
| |
| − | # Make image ~500 MB to fit it to NAND devices with bad blocks
| |
| − | dd if=/dev/zero of=512mb.img count=500 bs=1024k
| |
| − | | |
| − | # Format it using ext3 file system
| |
| − | mke2fs –F -j 512mb.img
| |
| − | | |
| − | # mount the new (empty) image
| |
| − | mount –t ext3 -o loop 512mb.img /tmp/destimg
| |
| − | | |
| − | # copy files preserving device nodes, ownership, permissions and
| |
| − | # symbolic links
| |
| − | cp -a /home/development/cm-x270/rootfs/* /tmp/destimg
| |
| − | | |
| − | # unmount the image
| |
| − | umount /tmp/destimg
| |
| − | | |
| − | # flush disk caches to the physical storage
| |
| − | sync
| |
| − | | |
| − | # clean up
| |
| − | rm -rf /tmp/destimg
| |
| − | </pre>
| |
| − | | |
| − | After running this script, the image ''/path/to/new/image/512mb.img'' will contain a file system suitable for a 512 MB NAND flash. This image can be installed on the CM-X270 using the procedure described in the [[Getting_started_with_Linux_on_CM-X270#Legacy_image_installation|Legacy image installation]] section of "Getting started with Linux on CM-X270" article.
| |
| − | | |
| − | == See also ==
| |
| − | | |
| − | * [[Getting started with Linux on CM-X270]]
| |
| − | * [[Getting started with Linux on CM-X300]]
| |
| − | * [[Getting started with Linux on EM-X270]]
| |
| − | * [[Linux Kernel for CM-X270]]
| |
| − | * [[Linux Kernel for CM-X300]]
| |
| − | * [[Angstrom Linux for EM-X270]]
| |
| − | * [[Debian Linux for Xscale modules]]
| |
| − | * [[Linux MTD drivers on CM-X270]]
| |
