Igor: Created page with "==LVDS== The BSP supports Startec KD070HDTLA020 7" LVDS LCD panel using the '''EB-HDRLVDS''' adapter board (supplied by Compulab with the LCD panel). The interface is enabled..."

2025-01-09T15:53:17Z

Created page with "==LVDS== The BSP supports Startec KD070HDTLA020 7" LVDS LCD panel using the '''EB-HDRLVDS''' adapter board (supplied by Compulab with the LCD panel). The interface is enabled..."

New page

==LVDS==
The BSP supports Startec KD070HDTLA020 7" LVDS LCD panel using the '''EB-HDRLVDS''' adapter board (supplied by Compulab with the LCD panel).

The interface is enabled in the default '''ucm-imx95.dtb''' device tree file.

Connect the panel to the adapter: LCD data cable to connector '''P7''' and the touch-panel cable to connector '''P8'''.

Connect the adapter the evaluation carrier-board to LVDS and touch headers [[UCM-iMX95:_Evaluation_Kit:_Hardware_Guide#Connector_Locations|'''P14''' and '''P13''']]

The Linux device node for the LVDS display:
/sys/class/drm/card0-LVDS-1
This device node contains information about the display, such as its supported modes and its current configuration.

==Display Manager==
Yocto uses Weston as the default display manager. It can be configured in ''/etc/xdg/weston/weston.ini''.</br>
For example the transform setting can be set to rotate-90, rotate-180, rotate-270, or commented out.</br>
In order to apply the configuration, you need to:
systemctl restart weston

[[Category:Linux]]
[[Category:Yocto]]
[[Category:UCM-iMX95]]

UCM-iMX95 Yocto Linux: Display - Revision history

Igor: Created page with "==LVDS== The BSP supports Startec KD070HDTLA020 7" LVDS LCD panel using the '''EB-HDRLVDS''' adapter board (supplied by Compulab with the LCD panel). The interface is enabled..."