Igor: Created page with "= Quick Setup = * Connect a USB cable between host PC and SBC-IOT-IMX8PLUS micro-USB console connector. * Insert the AC power-supply blade into the power supply unit. * Inser..."

2022-07-06T12:30:49Z

Created page with "= Quick Setup = * Connect a USB cable between host PC and SBC-IOT-IMX8PLUS micro-USB console connector. * Insert the AC power-supply blade into the power supply unit. * Inser..."

New page

= Quick Setup =

* Connect a USB cable between host PC and SBC-IOT-IMX8PLUS micro-USB console connector.
* Insert the AC power-supply blade into the power supply unit.
* Insert the power supply plug into the SBC-IOT-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
* On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
<blockquote>
{{:SB-SOM: serial port parameters table}}
</blockquote>
* Plug the power supply unit into an AC outlet. SBC-IOT-IMX8PLUS will turn on and boot into Linux.
* To login into Linux use "compulab" as username and set the password per first login instructions.

= SBC-IOT-IMX8PLUS Overview =

=== Panel connectors ===
: [[Image:sbc-iot-imx8plus panel-connectors.png|800px]]

=== Internal connectors ===
: [[Image:sbc-iot-imx8plus internal-connectors.png|800px]]

[[Category:SBC-IOT-IMX8PLUS]]

SBC-IOT-IMX8PLUS: Getting Started - Revision history

Igor: Created page with "= Quick Setup = * Connect a USB cable between host PC and SBC-IOT-IMX8PLUS micro-USB console connector. * Insert the AC power-supply blade into the power supply unit. * Inser..."