MCM-iMX93 NXP iMX93 Linux Resources - Revision history

Igor at 15:07, 19 February 2026

2026-02-19T15:07:53Z

Igor at 15:03, 19 February 2026

2026-02-19T15:03:40Z

Igor at 15:10, 3 February 2026

2026-02-03T15:10:10Z

Igor at 13:02, 16 February 2025

2025-02-16T13:02:50Z

Igor at 09:48, 27 July 2024

2024-07-27T09:48:28Z

Igor: Created page with "{{summary| Compulab [https://www.compulab.com/products/system-on-modules/ System on Modules] are miniature computer boards designed for integration into custom industrial appl..."

2024-06-30T11:21:31Z

Created page with "{{summary| Compulab [https://www.compulab.com/products/system-on-modules/ System on Modules] are miniature computer boards designed for integration into custom industrial appl..."

New page

{{summary|
Compulab [https://www.compulab.com/products/system-on-modules/ System on Modules] are miniature computer boards designed for integration into custom industrial applications.</br>
[https://www.compulab.com/products/computer-on-modules/ucm-imx93l-nxp-imx9-som-system-on-module/ MCM-iMX93] is a solderable System on Module, built around the NXP i.MX93 application processor.</br>
MCM-iMX93 is provided with comprehensive documentation and full ready-to-run support for the Linux operating system.</br>
|MCM-iMX93 SMD system-on-module.png|thumb}}

{{Resources Yocto
| 
* [[MCM-iMX93: Evaluation Kit: Getting Started|Eval-kit Quick Start Guide]]
* [[MCM-iMX93: Evaluation Kit: Hardware Guide|Eval-Kit Hardware Guide]]
* [[MCM-iMX93: Yocto Linux: Manual Installation: SD card|Installing Yocto on SD card]]
* [[MCM-iMX93: Yocto Linux: Installing Yocto images onto MCM-iMX93 eMMC| Installing Yocto onto on-board eMMC]]
* [[MCM-iMX93: Yocto Linux: Known Issues|Known Issues]]
| 
* [[Compulab Technical Support | Getting Technical Support]]
* [https://supportdb.compulab-systems.net/ Engineering Support Portal]
| 
* [https://www.compulab.com/products/computer-on-modules/mcm-imx93-nxp-i-mx-93-som-smd-system-on-module/ MCM-iMX93 Product Page]
* [[MCM-iMX93: Hardware: Revision Notes | MCM-iMX93 Hardware Revision Notes]]
* [https://www.compulab.com/products/som-evaluation-kits/mcm-imx93-evaluation-kit/ MCM-iMX93 Evaluation Kit]
* 
| 
* [[ Yocto: Setting Up Build Environment | Setting Up Yocto Build Environment]]
* [[MCM-iMX93: Yocto Linux: Building Yocto images|Building MCM-iMX93 Yocto Linux images]]
*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/sbc-mcm-imx93-r1.0/Documentation/linux_kernel_build.md Building MCM-iMX93 Linux Kernel]
*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/sbc-mcm-imx93-r1.0/Documentation/imx_boot_image_build.md Building MCM-iMX93 Boot Firmware]
* [[ Yocto: Common Yocto Build Errors | Common Yocto Build Errors ]]
| 
*[[Yocto: Introduction to Yocto development|Introduction to Yocto development]]
*[[Yocto: Making Changes to Yocto Meta-Layers|Making Changes to Yocto Meta-Layers]]
*[[Yocto: Introduction to Device Trees|Introduction to Device Trees]]
*[[Yocto: I/O Configuration and Device Tree Customization | Configuring I/O - Device Tree Customization]]

*[https://github.com/compulab-yokneam/meta-mender-compulab/blob/kirkstone-nxp/README.md Creating OTA update enabled images with Mender]
| 
* [[MCM-iMX93: Yocto Linux: How-To Guide#Serial Console|Console]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Display|Display]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Audio|Audio]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Camera|Camera]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Cellular_Modem|Cellular Modem]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#WiFi|WiFi]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Bluetooth|Bluetooth]]
| 
* [[MCM-iMX93: Yocto Linux: How-To Guide#Ethernet|Ethernet]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#USB|USB]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#GPIO|GPIO]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#CAN_bus|CAN bus]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#UART|UART]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#SPI|SPI]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#I2C|I2C]]
| 
* [[MCM-iMX93: Yocto Linux: How-To Guide#ADC|ADC]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#RTC|RTC]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#JTAG|JTAG]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Suspend_.2F_Resume|Sleep Mode]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#CPU_temperature|CPU temperature]]
* [[MCM-iMX93: Yocto Linux: How-To Guide#Device Serial Number|SOM Serial Number]]
| 

*[[Application Notes: Developing with Qt on CompuLab platforms|Developing with Qt on CompuLab platforms]]
*[[Application Notes: eMMC lifetime optimization|Optimizing eMMC lifetime and reliability]]

}}

__NOTOC__
{{note|1=From time to time Compulab releases new software versions for MCM-iMX93 in order to fix bugs, address component changes and add functionality. It is highly recommended to subscribe to the [[Image:Feed-icon.png|16px]] [{{fullurl:{{FULLPAGENAME}}|action=feed}} '''MCM-iMX93 RSS Feed'''] in order to receive automatic notifications about software updates.}}

{{ChangelogReleaseHistoryRss| content=
===== 30-Jun-2024, MCM-iMX93 1.0 ([[MCM-iMX93: Yocto Linux: Release Notes#30-Jun-2024.2C_MCM-iMX93_Yocto_Linux_1.0|release notes]]) =====
: Yocto 4.3 (nanbield) based on NXP nanbield-6.6.3-1.0.0
: - Kernel 6.6.3
: - U-Boot 2023.04
}}

[[Category:Linux]]
[[Category:Yocto]]
[[Category:MCM-iMX93]]

@@ Line 23: / Line 23: @@
 * [[ Yocto: Setting Up Build Environment | Setting Up Yocto Build Environment]]
 * [[MCM-iMX93: Yocto Linux: Building Yocto images|Building MCM-iMX93 Yocto Linux images]]
-*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/EVAL-MCM-iMX93-2.0/Documentation/linux_kernel_build.md Building MCM-iMX93 Linux Kernel]
+*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/EVAL-MCM-iMX93-2.0.1/Documentation/linux_kernel_build.md Building MCM-iMX93 Linux Kernel]
 <!--
 *[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/EVAL-MCM-iMX93-2.0/Documentation/imx_boot_image_build.md Building MCM-iMX93 Boot Firmware]
@@ Line 34: / Line 34: @@
 *[[Yocto: I/O Configuration and Device Tree Customization | Configuring I/O - Device Tree Customization]]
 <!-- * Custom Display Adaptation-->
-*[https://github.com/compulab-yokneam/meta-mender-compulab/blob/kirkstone-nxp/README.md Creating OTA update enabled images with Mender]
+*[https://github.com/compulab-yokneam/meta-mender-compulab/tree/scarthgap-nxp Creating OTA update enabled images with Mender]
 | <!-- Using SOM Interfaces and Functions #1 -->
 * [[MCM-iMX93: Yocto Linux: How-To Guide#ADC|ADC]]
@@ Line 68: / Line 68: @@
 {{ChangelogReleaseHistoryRss| content=
 ===== 16-Feb-2025, MCM-iMX93 2.0 ([[MCM-iMX93: Yocto Linux: Release Notes#16-Feb-2025.2C_MCM-iMX93_Yocto_Linux_2.0|release notes]]) =====
 : Yocto 5.0 (Scarthgap LTS) based on NXP 6.6-scarthgap
-: - U-Boot 2024.04 based on NXP lf_v2024.04
+: - U-Boot 2024.04 based on NXP lf_v2024.04 2d2dd77f1591770fad348b7e5355ad77012d35be
-: - Kernel 6.6.52 based on NXP lf-6.6.y
+: - Kernel 6.6.52 based on NXP lf-6.6.y 01b5a14624694fb802c6ef915df238ab55d8c532
 ===== 30-Jun-2024, MCM-iMX93 1.0 ([[MCM-iMX93: Yocto Linux: Release Notes#30-Jun-2024.2C_MCM-iMX93_Yocto_Linux_1.0|release notes]]) =====

@@ Line 34: / Line 34: @@
 *[[Yocto: I/O Configuration and Device Tree Customization | Configuring I/O - Device Tree Customization]]
 <!-- * Custom Display Adaptation-->
 | <!-- Using SOM Interfaces and Functions #1 -->
 * [[MCM-iMX93: Yocto Linux: How-To Guide#ADC|ADC]]
@@ Line 57: / Line 55: @@
 * [[MCM-iMX93: Yocto Linux: How-To Guide#USB|USB]]
 * [[MCM-iMX93: Yocto Linux: How-To Guide#WiFi|WiFi]]
 | <!-- Application Notes -->
 <!-- *[[Application Notes: Image Deployment in Mass Production|Image Deployment in Mass Production]]-->
 *[[Application Notes: eMMC lifetime optimization|Optimizing eMMC lifetime and reliability]]
 }}

@@ Line 23: / Line 23: @@
 * [[ Yocto: Setting Up Build Environment | Setting Up Yocto Build Environment]]
 * [[MCM-iMX93: Yocto Linux: Building Yocto images|Building MCM-iMX93 Yocto Linux images]]
-*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/sbc-mcm-imx93-r1.0/Documentation/linux_kernel_build.md Building MCM-iMX93 Linux Kernel]
+*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/EVAL-MCM-iMX93-2.0/Documentation/linux_kernel_build.md Building MCM-iMX93 Linux Kernel]
-*[https://github.com/compulab-yokneam/meta-bsp-imx9/blob/sbc-mcm-imx93-r1.0/Documentation/imx_boot_image_build.md Building MCM-iMX93 Boot Firmware]
+<!--
 * [[ Yocto: Common Yocto Build Errors |  Common Yocto Build Errors ]]
 | <!-- Customizing Yocto -->
@@ Line 34: / Line 36: @@
 *[https://github.com/compulab-yokneam/meta-mender-compulab/blob/kirkstone-nxp/README.md Creating OTA update enabled images with Mender]
 | <!-- Using SOM Interfaces and Functions #1 -->
-* [[MCM-iMX93: Yocto Linux: How-To Guide#Serial Console|Console]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#ADC|ADC]]
 * [[MCM-iMX93: Yocto Linux: How-To Guide#Audio|Audio]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#Camera|Camera]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#Bluetooth|Bluetooth]]
 * [[MCM-iMX93: Yocto Linux: How-To Guide#Cellular_Modem|Cellular Modem]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#WiFi|WiFi]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#CPU_temperature|CPU temperature]]
 | <!-- Using SOM Interfaces and Functions #2 -->
 * [[MCM-iMX93: Yocto Linux: How-To Guide#Ethernet|Ethernet]]
 * [[MCM-iMX93: Yocto Linux: How-To Guide#GPIO|GPIO]]
 * [[MCM-iMX93: Yocto Linux: How-To Guide#I2C|I2C]]
 | <!-- Using SOM Interfaces and Functions #3 -->
-* [[MCM-iMX93: Yocto Linux: How-To Guide#ADC|ADC]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#Serial Console|Serial Console]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#RTC|RTC]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#SPI|SPI]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#JTAG|JTAG]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#Suspend_.2F_Resume|Suspend Mode]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#Suspend_.2F_Resume|Sleep Mode]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#UART|UART]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#CPU_temperature|CPU temperature]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#USB|USB]]
-* [[MCM-iMX93: Yocto Linux: How-To Guide#Device Serial Number|SOM Serial Number]]
+* [[MCM-iMX93: Yocto Linux: How-To Guide#WiFi|WiFi]]
 | <!-- Application Notes -->
 <!-- *[[Application Notes: Image Deployment in Mass Production|Image Deployment in Mass Production]]-->
@@ Line 67: / Line 68: @@
 {{ChangelogReleaseHistoryRss| content=
 ===== 30-Jun-2024, MCM-iMX93 1.0 ([[MCM-iMX93: Yocto Linux: Release Notes#30-Jun-2024.2C_MCM-iMX93_Yocto_Linux_1.0|release notes]]) =====
 : Yocto 4.3 (nanbield) based on NXP nanbield-6.6.3-1.0.0

@@ Line 1: / Line 1: @@
 {{summary|
-Compulab [https://www.compulab.com/products/system-on-modules/ System on Modules] are miniature computer boards designed for integration into custom industrial applications.</br>
+Compulab [https://www.compulab.com/products/system-on-modules/ System on Module (SOM)] products are miniature computer boards designed for integration into custom industrial applications.</br>
-[https://www.compulab.com/products/computer-on-modules/ucm-imx93l-nxp-imx9-som-system-on-module/ MCM-iMX93] is a solderable System on Module, built around the NXP i.MX93 application processor.</br>
+[https://www.compulab.com/products/computer-on-modules/mcm-imx93-nxp-i-mx-93-som-smd-system-on-module/ MCM-iMX93 solderable System on Module] based on the NXP i.MX93 application processor features a highly scalable dual-core Cortex-A55 CPU coupled with an integrated AI/ML neural processing unit.</br>
 MCM-iMX93 is provided with comprehensive documentation and full ready-to-run support for the Linux operating system.</br>
 |MCM-iMX93 SMD system-on-module.png|thumb}}