Igor: Created page with "== Overview == This article provides instructions needed to install the U-Boot firmware onto the internal storage. The recommended installation procedure is using a host PC wi..."

2025-06-10T11:46:44Z

Created page with "== Overview == This article provides instructions needed to install the U-Boot firmware onto the internal storage. The recommended installation procedure is using a host PC wi..."

New page

== Overview ==
This article provides instructions needed to install the U-Boot firmware onto the internal storage.
The recommended installation procedure is using a host PC with a Debian-based operating system.

* Download [https://www.compulab.com/products/iot-gateways/iot-link-industrial-iot-gateway/#devres Debian Linux image] archive.
* [[IOT-LINK: Debian Linux: Preparing Live Media|Prepare Debian bootable USB]]
* Run:
sudo cl-uboot
<pre>
Select a U-Boot file:
lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x Available U-Boot files: x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x (*) imx-boot-iot-link-sd.bin-flash_singleboot x x
x x x x
x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj x
tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu
x < OK > <Cancel> x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
</pre>
<pre>
Select a boot device:
lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x Available boot devices: x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x ( ) mmcblk0 x x
x x (*) mmcblk0boot0 x x
x x ( ) mmcblk0boot1 x x
x x x x
x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj x
tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu
x < OK > <Cancel> x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
</pre>
* When installation is complete, the following message will show up:
<pre>
lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x U Boot flash result: x
xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx
x 2056+0 records in x
x 2056+0 records out x
x 2105344 bytes (2.1 MB, 2.0 MiB) copied, 0.115582 s, 18.2 MB/s x
x x
tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu
x < OK > x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
</pre>
* Reboot
* Press any key to get into the U-Boot command prompt
* Restore default boot environment:
env default -a ; saveenv ; reset

[[Category:Linux]]
[[Category:U-Boot]]
[[Category:IOT-LINK]]

IOT-LINK: U-Boot: Installation - Revision history

Igor: Created page with "== Overview == This article provides instructions needed to install the U-Boot firmware onto the internal storage. The recommended installation procedure is using a host PC wi..."