Igor at 15:42, 5 June 2025

2025-06-05T15:42:48Z

Igor: Created page with "= Quick Setup = * Connect a USB cable between the host PC and IOT-LINK micro-USB console '''DBG''' connector (4). Verify that the serial port is visible on the host PC. * On..."

2025-06-05T15:42:36Z

Created page with "= Quick Setup = * Connect a USB cable between the host PC and IOT-LINK micro-USB console '''DBG''' connector (4). Verify that the serial port is visible on the host PC. * On..."

New page

= Quick Setup =

* Connect a USB cable between the host PC and IOT-LINK micro-USB console '''DBG''' connector (4). Verify that the serial port is visible on the host PC.
* On your host PC, start a terminal emulation program (such as Tera Term or PuTTy) with the following serial port settings:
<blockquote>
{{:SB-SOM: serial port parameters table}}
</blockquote>
*
* Use the Compulab '''IOTL-ACC-PSUTB2''' PSU, insert the power supply plug into the IOT-LINK DC input terminal block (8).
** NOTE: In case another 12V-24V DC power source is being used: connect PSU wires to IOT-LINK DC input terminal block (8).
* Plug the power supply unit into an AC outlet. IOT-LINK will turn on and boot into Linux. Status Indicator (2) should blink blue.
* To log in into Debian Linux, use "'''compulab'''" as the username. There is no password. The device will ask to set the password for the "'''compulab'''" superuser on first login session.

= IOT-LINK Overview =

=== Front panel layout ===
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="850" style="text-align: center
| style= background-color:#ffffcc;" | '''Figure'''
| style= background-color:#ffffcc;" | '''Callout'''
| style= background-color:#ffffcc;" | '''Function'''
|-
| rowspan=10 | [[Image:Iot-link-front-panel.jpg|400px]]
| 1
| style="text-align: left;" | Industrial I/O terminal block, 10 pin, 16-26 AWG
|-
| 2
| style="text-align: left;" | System status indicator. Dual-color blue/amber LED
|-
| 3
| style="text-align: left;" | User programmable LED A
|-
| 4
| style="text-align: left;" | Console connector, micro-USB type
|-
| 5
| style="text-align: left;" | Antenna connector A
|-
| 6
| style="text-align: left;" | USB connector
|-
| 7
| style="text-align: left;" | Antenna connector B
|-
| 8
| style="text-align: left;" | DC power input connector
|-
| 9
| style="text-align: left;" | Ethernet port, dual RJ45 connector
|-
| 10
| style="text-align: left;" | User programmable recessed push-button
|-
|}

=== Back panel layout ===
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="850" style="text-align: center
| style= background-color:#ffffcc;" | '''Figure'''
| style= background-color:#ffffcc;" | '''Callout'''
| style= background-color:#ffffcc;" | '''Function'''
|-
| rowspan=5 | [[Image:Iot-link-back-panel.jpg|left|400px]]
| 1
| style="text-align: left;" | RTC battery holder
|-
| 2
| style="text-align: left;" | SIM card socket
|-
| 3,4
| style="text-align: left;" | RS485 / CAN bus termination jumpers
|-
| 5
| style="text-align: left;" | SDP programming port, micro-USB type
|-
| colspan=2 style="text-align: left;" | NOTE: remove the back panel cover to access the connectors specified above
|-
|}

= Additional Resources =

*[[IOT-LINK: Debian Linux: How-To Guide|IOT-LINK Debian Linux How-To Guide]]
* [https://www.compulab.com/products/iot-gateways/iot-link-industrial-iot-gateway/#devres IOT-LINK Resources]

[[Category:IOT-LINK]]

@@ Line 79: / Line 79: @@
 = Additional Resources =
 </br>
 * [https://www.compulab.com/products/iot-gateways/iot-link-industrial-iot-gateway/#devres IOT-LINK Resources]
 [[Category:IOT-LINK]]

IOT-LINK: Getting Started - Revision history

Igor at 15:42, 5 June 2025

Igor: Created page with "= Quick Setup = * Connect a USB cable between the host PC and IOT-LINK micro-USB console '''DBG''' connector (4). Verify that the serial port is visible on the host PC. * On..."