CM-T3730: Linux: Kernel - Revision history

Lifshitz: /* Git clone */

2013-07-29T09:39:53Z

‎Git clone

Lifshitz at 12:28, 17 March 2013

2013-03-17T12:28:55Z

Ilya: /* Git clone */

2012-11-14T10:32:53Z

‎Git clone

Grinberg: /* Cross-Compiler */

2012-08-12T09:01:36Z

‎Cross-Compiler

Grinberg: /* Git clone */

2012-06-05T06:08:01Z

‎Git clone

Grinberg: /* See also */

2012-04-03T11:29:43Z

‎See also

Grinberg: /* Building the kernel */

2011-09-01T11:13:36Z

‎Building the kernel

New page

== Overview ==
Linux kernel for CM-T3730 modules provides support for on-board peripherals and abstracts the functionality provided by the hardware. Current support coverage is specified at [http://www.compulab.co.il/t3730/html/t3730-os-support.htm O/S support coverage map] page. CompuLab provides ready-to-run binary kernel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3730 modules.
Most of the CM-T3730 functionality is merged into the mainline kernel starting from 3.1 release.

== Kernel command line ==
The Linux kernel for CM-T3730 is shipped with built-in command line parameters:
<pre>
root=/dev/mmcblk0p3 rootwait console=ttyO2,115200 omapfb.mode=dvi:1024x768-24@60 omapfb.vram=1:4M vram=8M
</pre>

The default kernel command line defines primary console, default display settings, root device and root filesystem type.<br>
Setting U-Boot {{parameter|bootargs}} environment variable overrides default kernel command line and can be used to set desired kernel parameters.

== Building kernel for CM-T3730 ==
=== Cross-Compiler ===
There are several options for cross-compilation toolchain setup. You can either compile your cross-compiler or use an already built cross-compiler. The cross-compiler should support the ARM embedded-application binary interface ("[http://en.wikipedia.org/wiki/Application_binary_interface#EABI EABI]")
* Pre-built toolchain (recommended):
** [http://www.codesourcery.com/sgpp/lite/arm/portal/release1294 CodeSourcery]
* Tools for creating cross-compilers:
** [http://ymorin.is-a-geek.org/dokuwiki/projects/crosstool Crosstool-ng]: Builds a cross-compiler from source. Non-distribution specific.
** [http://www.gentoo.org/proj/en/base/embedded/handbook/index.xml?part=1&chap=4 Crossdev]: Gentoo's cross-compiler builder. Needs Gentoo.

=== U-Boot mkimage tool ===
U-Boot {{cmd|mkimage}} utility is required in order to create kernel images that can be loaded by the CM-T3730 bootloader.
You can download prebuilt [[media:mkimage.tar.gz|{{cmd|mkimage}} binary]] or build it yourself:
<pre>
mkdir ~/tmp
cd tmp
wget ftp://ftp.denx.de/pub/u-boot/u-boot-latest.tar.bz2
tar -xjvf u-boot-latest.tar.bz2
cd u-boot-<version>
touch include/config.{h,mk}
make tools
sudo install tools/mkimage /usr/local/bin
</pre>

=== Getting kernel sources ===
There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-omap git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
==== Snapshot download ====
* Download [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=snapshot;h=02f8c6aee8df3cdc935e9bdd4f2d020306035dbe;sf=tgz v3.0] snapshot with your web browser. Note, that tools like {{cmd|wget}} and {{cmd|curl}} will not work here.
* Extract the downloaded archive {{filename|linux-02f8c6a.tar.gz}}
<pre>
cd /home/development/cm-t3730/kernel
tar xzvf /path/to/downloaded/linux-02f8c6a.tar.gz
mv linux-02f8c6a linux-cm-t3730
</pre>
: This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
* Apply the CM-T3730 patch
<pre>
cd /home/development/cm-t3730/kernel/linux-cm-t3730
patch -p1 < /path/to/t3730-linux/kernel/linux-3.0-cm-t3730-1.patch
</pre>
* Copy the CM-T3730 kernel configuration file
<pre>
cd /home/development/cm-t3730/kernel/linux-cm-t3730
cp /path/to/t3730-linux/kernel/linux-3.0-cm-t3730-1.defconfig arch/arm/configs/cm_t3730_defconfig
</pre>

==== Git clone ====
* Install [http://git-scm.com/ git] version control system.
* Create a clone of linux kernel tree
<pre>
cd /home/development/cm-t3730/kernel
git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux-cm-t3730
</pre>
* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0 tag (02f8c6aee8df3cdc935e9bdd4f2d020306035dbe commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
<pre>
git checkout -b cm-t3730-dev v3.0
</pre>
* Apply the CM-T3730 patch
<pre>
cd /home/development/cm-t3730/kernel/linux-cm-t3730
git apply /path/to/t3730-linux/kernel/linux-3.0-cm-t3730-1.patch
</pre>
* Copy the CM-T3730 kernel configuration file
<pre>
cd /home/development/cm-t3730/kernel/linux-cm-t3730
cp /path/to/t3730-linux/kernel/linux-3.0-cm-t3730-1.defconfig arch/arm/configs/cm_t3730_defconfig
</pre>

=== Building the kernel ===
<pre>
export ARCH=arm
export CROSS_COMPILE=arm-none-linux-eabi-
make cm_t3730_defconfig
make menuconfig
make && make uImage && \
INSTALL_MOD_PATH=/home/development/cm-t3730/rootfs make modules_install
</pre>

In the example above, the Linux kernel image ({{filename|uImage}}) will be created in {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730/arch/arm/boot}}, and the loadable kernel modules will be installed into the {{filename|/home/development/cm-t3730/rootfs/lib/modules}} directory.<br>
When the CM-T3730 is booted with the kernel image created as described above and with networked root filesystem at {{filename|/home/development/cm-t3730/rootfs/}}, the system will be able to load the kernel modules properly, thus avoiding module version problems.

== See also ==
* [[CM-T3730: Linux: Getting started]]
* [[CM-T3730: Linux: Angstrom]]
* [[U-Boot for CM-T3730]]

[[Category:Linux]]
[[Category:CM-T3730]]

@@ Line 42: / Line 42: @@
 There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 ==== Snapshot download ====
-* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.68.tar.bz2 v3.0.68] snapshot with your web browser.
+* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.87.tar.bz2 v3.0.87] snapshot with your web browser.
-* Extract the downloaded archive {{filename|linux-3.0.68.tar.bz2}}
+* Extract the downloaded archive {{filename|linux-3.0.87.tar.bz2}}
 <pre>
 cd /home/development/cm-t3730/kernel
-tar xvf /path/to/downloaded/linux-3.0.68.tar.bz2
+tar xvf /path/to/downloaded/linux-3.0.87.tar.bz2
-mv linux-3.0.68 linux-cm-t3730
+mv linux-3.0.87 linux-cm-t3730
 </pre>
 : This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
@@ Line 53: / Line 53: @@
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.68-cm-t3730-5.patch
+patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.87-cm-t3730-6.patch
 </pre>
@@ Line 63: / Line 63: @@
 git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 </pre>
-* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.68 tag (e28c3f2b514b5581e15614f7cf976131092cf4b6 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
+* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.87 tag (61bfa77de71ef9d84614d3a7f0a3ca1c7af82058 commit) in the Linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
 <pre>
-git checkout -b cm-t3730-dev v3.0.68
+git checkout -b cm-t3730-dev v3.0.87
 </pre>
 * Apply the CM-T3730 patch
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-git apply /path/to/cm-t3730-linux/kernel/linux-3.0.68-cm-t3730-5.patch
+git apply /path/to/cm-t3730-linux/kernel/linux-3.0.87-cm-t3730-6.patch
 </pre>

@@ Line 42: / Line 42: @@
 There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 ==== Snapshot download ====
-* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.50.tar.bz2 v3.0.50] snapshot with your web browser.
+* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.68.tar.bz2 v3.0.68] snapshot with your web browser.
-* Extract the downloaded archive {{filename|linux-3.0.50.tar.bz2}}
+* Extract the downloaded archive {{filename|linux-3.0.68.tar.bz2}}
 <pre>
 cd /home/development/cm-t3730/kernel
-tar xvf /path/to/downloaded/linux-3.0.50.tar.bz2
+tar xvf /path/to/downloaded/linux-3.0.68.tar.bz2
-mv linux-3.0.50 linux-cm-t3730
+mv linux-3.0.68 linux-cm-t3730
 </pre>
 : This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
@@ Line 53: / Line 53: @@
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.50-cm-t3730-4.patch
+patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.68-cm-t3730-5.patch
 </pre>
@@ Line 63: / Line 63: @@
 git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 </pre>
-* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.50 tag (27d0858dbcf199838b8c50a3e94d397bf326d986 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
+* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.68 tag (e28c3f2b514b5581e15614f7cf976131092cf4b6 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
 <pre>
-git checkout -b cm-t3730-dev v3.0.50
+git checkout -b cm-t3730-dev v3.0.68
 </pre>
 * Apply the CM-T3730 patch
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-git apply /path/to/cm-t3730-linux/kernel/linux-3.0.50-cm-t3730-4.patch
+git apply /path/to/cm-t3730-linux/kernel/linux-3.0.68-cm-t3730-5.patch
 </pre>

@@ Line 8: / Line 8: @@
 The Linux kernel for CM-T3730 is shipped with built-in command line parameters:
 <pre>
-root=/dev/mmcblk0p3 rootwait console=ttyO2,115200 omapfb.mode=dvi:1024x768-24@60 omapfb.vram=1:4M vram=8M
+root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 omapfb.mode=dvi:1024x768-24@60 omapfb.vram=1:4M vram=8M
 </pre>
@@ Line 42: / Line 42: @@
 There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 ==== Snapshot download ====
-* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.38.tar.bz2 v3.0.38] snapshot with your web browser.
+* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.50.tar.bz2 v3.0.50] snapshot with your web browser.
-* Extract the downloaded archive {{filename|linux-3.0.38.tar.bz2}}
+* Extract the downloaded archive {{filename|linux-3.0.50.tar.bz2}}
 <pre>
 cd /home/development/cm-t3730/kernel
-tar xvf /path/to/downloaded/linux-3.0.38.tar.bz2
+tar xvf /path/to/downloaded/linux-3.0.50.tar.bz2
-mv linux-3.0.38 linux-cm-t3730
+mv linux-3.0.50 linux-cm-t3730
 </pre>
 : This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
@@ Line 53: / Line 53: @@
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.38-cm-t3730-3.patch
+patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.50-cm-t3730-4.patch
 </pre>
@@ Line 63: / Line 63: @@
 git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 </pre>
-* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.38 tag (ce05b1d31e57b7de6b814073e88bdd403ce71229 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
+* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.50 tag (27d0858dbcf199838b8c50a3e94d397bf326d986 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
 <pre>
-git checkout -b cm-t3730-dev v3.0.38
+git checkout -b cm-t3730-dev v3.0.50
 </pre>
 * Apply the CM-T3730 patch
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-git apply /path/to/cm-t3730-linux/kernel/linux-3.0.38-cm-t3730-3.patch
+git apply /path/to/cm-t3730-linux/kernel/linux-3.0.50-cm-t3730-4.patch
 </pre>

@@ Line 22: / Line 22: @@
 ** [http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/ Sourcery CodeBench Lite]
 * Tools for creating cross-compilers:
-** [http://ymorin.is-a-geek.org/dokuwiki/projects/crosstool Crosstool-ng]: Builds a cross-compiler from source. Non-distribution specific.
+** [http://crosstool-ng.org/ Crosstool-ng]: Builds a cross-compiler from source. Non-distribution specific.
 ** [http://www.gentoo.org/proj/en/base/embedded/handbook/index.xml?part=1&chap=4 Crossdev]: Gentoo's cross-compiler builder. Needs Gentoo.
@@ Line 42: / Line 42: @@
 There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 ==== Snapshot download ====
-* Download [http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=snapshot;h=091ce3d38e5e57cf7dd44d66335725910e928f59;sf=tgz v3.0.32] snapshot with your web browser. Note, that tools like {{cmd|wget}} and {{cmd|curl}} will not work here.
+* Download [http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.38.tar.bz2 v3.0.38] snapshot with your web browser.
-* Extract the downloaded archive {{filename|linux-stable-091ce3d.tar.gz}}
+* Extract the downloaded archive {{filename|linux-3.0.38.tar.bz2}}
 <pre>
 cd /home/development/cm-t3730/kernel
-tar xzvf /path/to/downloaded/linux-stable-091ce3d.tar.gz
+tar xvf /path/to/downloaded/linux-3.0.38.tar.bz2
-mv linux-stable-091ce3d linux-cm-t3730
+mv linux-3.0.38 linux-cm-t3730
 </pre>
 : This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
@@ Line 53: / Line 53: @@
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-patch -p1 < /path/to/t3730-linux/kernel/linux-3.0.32-cm-t3730-2.patch
+patch -p1 < /path/to/cm-t3730-linux/kernel/linux-3.0.38-cm-t3730-3.patch
 </pre>
@@ Line 63: / Line 63: @@
 git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 </pre>
-* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.32 tag (091ce3d38e5e57cf7dd44d66335725910e928f59 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
+* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.38 tag (ce05b1d31e57b7de6b814073e88bdd403ce71229 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
 <pre>
-git checkout -b cm-t3730-dev v3.0.32
+git checkout -b cm-t3730-dev v3.0.38
 </pre>
 * Apply the CM-T3730 patch
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-git apply /path/to/t3730-linux/kernel/linux-3.0.32-cm-t3730-2.patch
+git apply /path/to/cm-t3730-linux/kernel/linux-3.0.38-cm-t3730-3.patch
 </pre>

@@ Line 1: / Line 1: @@
 == Overview ==
-Linux kernel for CM-T3730 modules provides support for on-board peripherals and abstracts the functionality provided by the hardware. Current support coverage is specified at [http://www.compulab.co.il/t3730/html/t3730-os-support.htm O/S support coverage map] page. CompuLab provides ready-to-run binary kernel images, and source code of the modifications and additions made to the Linux kernel to work properly with CM-T3730 modules.
+Linux kernel for CM-T3730 modules provides support for on-board peripherals and abstracts the functionality provided by the hardware.
 Most of the CM-T3730 functionality is merged into the mainline kernel starting from 3.1 release.
@@ Line 11: / Line 13: @@
 The default kernel command line defines primary console, default display settings, root device and root filesystem type.<br>
 Setting U-Boot {{parameter|bootargs}} environment variable overrides default kernel command line and can be used to set desired kernel parameters.
 == Building kernel for CM-T3730 ==
@@ Line 16: / Line 20: @@
 There are several options for cross-compilation toolchain setup. You can either compile your cross-compiler or use an already built cross-compiler. The cross-compiler should support the ARM embedded-application binary interface ("[http://en.wikipedia.org/wiki/Application_binary_interface#EABI EABI]")
 * Pre-built toolchain (recommended):
-** [http://www.codesourcery.com/sgpp/lite/arm/portal/release1294 CodeSourcery]
+** [http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/ Sourcery CodeBench Lite]
 * Tools for creating cross-compilers:
 ** [http://ymorin.is-a-geek.org/dokuwiki/projects/crosstool Crosstool-ng]: Builds a cross-compiler from source. Non-distribution specific.
@@ Line 36: / Line 40: @@
 === Getting kernel sources ===
-There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-omap git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
+There are two ways to get Linux kernel sources that can be used as a baseline for CM-T3730 kernel. You can create a copy of linux-stable git tree or download a snapshot and extract it. We assume that you have created {{filename|/home/development/cm-t3730/kernel}} directory for CM-T3730 kernel development.
 ==== Snapshot download ====
-* Download [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=snapshot;h=02f8c6aee8df3cdc935e9bdd4f2d020306035dbe;sf=tgz v3.0] snapshot with your web browser. Note, that tools like {{cmd|wget}} and {{cmd|curl}} will not work here.
+* Download [http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=snapshot;h=091ce3d38e5e57cf7dd44d66335725910e928f59;sf=tgz v3.0.32] snapshot with your web browser. Note, that tools like {{cmd|wget}} and {{cmd|curl}} will not work here.
-* Extract the downloaded archive {{filename|linux-02f8c6a.tar.gz}}
+* Extract the downloaded archive {{filename|linux-stable-091ce3d.tar.gz}}
 <pre>
 cd /home/development/cm-t3730/kernel
-tar xzvf /path/to/downloaded/linux-02f8c6a.tar.gz
+tar xzvf /path/to/downloaded/linux-stable-091ce3d.tar.gz
-mv linux-02f8c6a linux-cm-t3730
+mv linux-stable-091ce3d linux-cm-t3730
 </pre>
 : This will create {{filename|/home/development/cm-t3730/kernel/linux-cm-t3730}} directory containing linux kernel tree.
@@ Line 49: / Line 53: @@
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-patch -p1 < /path/to/t3730-linux/kernel/linux-3.0-cm-t3730-1.patch
+patch -p1 < /path/to/t3730-linux/kernel/linux-3.0.32-cm-t3730-2.patch
 </pre>
@@ Line 62: / Line 61: @@
 <pre>
 cd /home/development/cm-t3730/kernel
-git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux-cm-t3730
+git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-cm-t3730
 </pre>
-* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0 tag (02f8c6aee8df3cdc935e9bdd4f2d020306035dbe commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
+* Create a branch for CM-T3730 development. The CM-T3730 patches are generated vs. v3.0.32 tag (091ce3d38e5e57cf7dd44d66335725910e928f59 commit) in the linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
 <pre>
-git checkout -b cm-t3730-dev v3.0
+git checkout -b cm-t3730-dev v3.0.32
 </pre>
 * Apply the CM-T3730 patch
 <pre>
 cd /home/development/cm-t3730/kernel/linux-cm-t3730
-git apply /path/to/t3730-linux/kernel/linux-3.0-cm-t3730-1.patch
+git apply /path/to/t3730-linux/kernel/linux-3.0.32-cm-t3730-2.patch
 </pre>
 === Building the kernel ===

@@ Line 95: / Line 95: @@
 * [[CM-T3730: Linux: Getting started]]
 * [[CM-T3730: Linux: Angstrom]]
 * [[U-Boot for CM-T3730]]
 [[Category:Linux]]
 [[Category:CM-T3730]]