CL-SOM-iMX7: Yocto Linux: Package contents - Revision history

imported>Uri.mashiach at 14:16, 16 January 2019

2019-01-16T14:16:50Z

Ilya: /* extra */

2017-10-18T08:19:16Z

‎extra

Ilya: /* images */

2017-04-30T07:01:13Z

‎images

Ilya: /* Package contents */

2017-04-05T08:14:36Z

‎Package contents

Grinberg at 20:19, 20 December 2016

2016-12-20T20:19:09Z

New page

== Package contents ==

__NOTOC__

=== Layout ===
<pre>
├── development
│   └── README.html
├── extra
│   └── btwlink-fs-support.tar.bz2
├── images
│   └── fsl-image-gui-cl-som-imx7.rootfs.sdcard.gz
├── kernel
│   ├── dtb
│   │   ├── imx7d-cl-som-imx7.dtb
│   │   └── imx7d-sbc-imx7.dtb
│   ├── modules-cl-som-imx7.tgz
│   └── zImage-cl-som-imx7
└── rootfs
└── fsl-image-gui-cl-som-imx7-rootfs.tar.bz2
</pre>

=== development ===
Development documentation

=== images ===
* {{filename|fsl-image-gui-cl-som-imx7.rootfs.sdcard.gz}} - SD card image that provides the full system to boot with U-Boot and Linux kernel

=== kernel ===
* {{filename|zImage-cl-som-imx7}} - ready to run Linux kernel version 4.1.15-cl-som-imx7 for CL-SOM-iMX7
* {{filename|dtb}} - Device tree blobs folder

=== rootfs ===
* {{filename|fsl-image-gui-cl-som-imx7-rootfs.tar.bz2}} - rootfs tar ball for deployment onto any (including NFS) storage or further customization

=== extra ===
* {{filename|btwlink-fs-support.tar.bz2}} - miscellaneous utilities and firmware for WiLink8 Bluetooth support

[[Category:Linux]]
[[Category:Yocto]]
[[Category:CL-SOM-iMX7]]

@@ Line 9: / Line 9: @@
 │   └── README.html
 ├── images
-│   └── fsl-image-gui-cl-som-imx7.sdcard.gz
+│   ├── cl-som-imx7-image-qt5.sdcard.bz2
-├── install
+│   └── rootfs.tar.bz2
 ├── kernel
 │   ├── dtb
 │   │   ├── imx7d-cl-som-imx7.dtb
 │   │   ├── imx7d-sbc-imx7.dtb
 │   │   ├── imx7d-sbc-imx7-lvds.dtb
 │   │   ├── imx7d-sbc-imx7-m4.dtb
 │   │   ├── imx7d-sbc-iot-imx7-can.dtb
-│   │   ├── imx7d-sbc-iot-imx7.dtb
+│   │   └── imx7d-sbc-iot-imx7-rs485-hdx.dtb
 │   ├── modules-cl-som-imx7.tgz
 │   └── zImage-cl-som-imx7
@@ Line 51: / Line 30: @@
 === images ===
-* {{filename|fsl-image-gui-cl-som-imx7.rootfs.sdcard.gz}} - SD card image that provides the full system to boot with U-Boot and Linux kernel
+* {{filename|cl-som-imx7-image-qt5.sdcard.bz2}} - SD card image that provides the full system to boot with U-Boot, Linux kernel and Yocto file-system
 === kernel ===
-* {{filename|zImage-cl-som-imx7}} - ready to run Linux kernel version 4.1.15-cl-som-imx7 for CL-SOM-iMX7
+* {{filename|zImage-cl-som-imx7}} - ready to run Linux kernel version 4.9.11-cl-som-imx7-5.1 for CL-SOM-iMX7
 * {{filename|modules-cl-som-imx7.tgz}} - a modules archive, that matches the ready to run Linux kernel ({{filename|zImage-cl-som-imx7}}) for CL-SOM-iMX7
 * {{filename|dtb}} - Device tree blobs folder
+* {{filename|imx7d-cl-som-imx7.dtb}} - device tree blob for CL-SOM-iMX7 SoM
-=== install ===
+* {{filename|imx7d-sbc-imx7.dtb}} - device tree blob for SBC-iMX7 evaluation board kit
-* {{filename|zImage}} - ready to run Linux kernel image binary for CL-SOM-iMX7
+* {{filename|imx7d-sbc-imx7-lvds.dtb}} - device tree blob for SBC-iMX7 evaluation board kit with LVDS support
-* {{filename|imx7d-cl-som-imx7.dtb}} - Device tree blob for CL-SOM-iMX7 SoM
+* {{filename|imx7d-sbc-imx7-m4.dtb}} - device tree blob for SBC-iMX7 evaluation board kit with Cortex-M4 core support
-* {{filename|imx7d-cl-som-imx7-m4.dtb}} - Device tree blob for CL-SOM-iMX7 SoM with Cortex-M4 core support
+* {{filename|imx7d-sbc-iot-imx7.dtb}} - device tree blob for IOT-GATE-iMX7 and SBC-IOT-iMX7 devices
-* {{filename|imx7d-sbc-imx7.dtb}} - Device tree blob for SBC-iMX7 Evaluation boards kit
+* {{filename|imx7d-sbc-iot-imx7-can.dtb}} - device tree blob for IOT-GATE-iMX7 and SBC-IOT-iMX7 devices with CAN bus support
-* {{filename|imx7d-sbc-imx7-csi.dtb}} - Device tree blob for SBC-iMX7 Evaluation boards kit with MIPI CSI camera support
+* {{filename|imx7d-sbc-iot-imx7-rs485-hdx.dtb}} - device tree blob for IOT-GATE-iMX7 and SBC-IOT-iMX7 devices with RS485 half duplex support
 [[Category:Linux]]

@@ Line 5: / Line 5: @@
 === Layout ===
 <pre>
-cl-som-imx7-yocto-linux
+cl-som-imx7-yocto-linux/
 ├── development
 │   └── README.html
 ├── images
-│   └── fsl-image-gui-cl-som-imx7.rootfs.sdcard.gz
+│   └── fsl-image-gui-cl-som-imx7.sdcard.gz
 ├── install
 │   ├── boot.scr
 │   ├── imx7d-cl-som-imx7.dtb
 │   ├── imx7d-sbc-imx7.dtb
 │   ├── imx7d-sbc-iot-imx7.dtb
 │   ├── install.ext2
 │   ├── kernel.img
 │   ├── ramdisk.img
 │   ├── rootfs.tar.bz2
@@ Line 27: / Line 31: @@
 │   ├── dtb
 │   │   ├── imx7d-cl-som-imx7.dtb
 │   │   ├── imx7d-sbc-imx7.dtb
-│   │   └── imx7d-sbc-iot-imx7.dtb
+│   │   ├── imx7d-sbc-imx7-lvds.dtb
 │   ├── modules-cl-som-imx7.tgz
 │   └── zImage-cl-som-imx7
@@ Line 43: / Line 55: @@
 === kernel ===
 * {{filename|zImage-cl-som-imx7}} - ready to run Linux kernel version 4.1.15-cl-som-imx7 for CL-SOM-iMX7
 * {{filename|dtb}} - Device tree blobs folder
@@ Line 48: / Line 61: @@
 * {{filename|zImage}} - ready to run Linux kernel image binary for CL-SOM-iMX7
 * {{filename|imx7d-cl-som-imx7.dtb}} - Device tree blob for CL-SOM-iMX7 SoM
 * {{filename|imx7d-sbc-imx7.dtb}} - Device tree blob for SBC-iMX7 Evaluation boards kit
 * {{filename|imx7d-sbc-iot-imx7.dtb}} - Device tree blob for IOT-GATE-iMX7 and SBC-IOT-iMX7 devices
 * {{filename|rootfs.tar.bz2}} - Yocto Linux root file system
-* {{filename|kernel.img}} - Kernel image required for installation onto the eMMC
+* {{filename|kernel.img}} - Kernel image required for installation onto the eMMC/NAND
-* {{filename|ramdisk.img}} - Ramdisk image required for installation onto the eMMC
+* {{filename|ramdisk.img}} - Ramdisk image required for installation onto the eMMC/NAND
 * {{filename|boot.scr}} - U-Boot script used for image installation
 * {{filename|install.ext2}} - ext2 image containing additional scripts for Automatic Installation Procedure
 [[Category:Linux]]
@@ Line 67: / Line 81: @@
 [[Category:IOT-GATE-iMX7]]
 [[Category:SBC-IOT-iMX7]]