CL-SOM-iMX6UL: Evaluation Kit: Getting Started - Revision history

Grinberg: /* What Next? */

2017-03-27T12:52:26Z

‎What Next?

Grinberg: /* What Next? */

2016-07-11T14:07:18Z

‎What Next?

Grinberg: /* System setup */

2016-07-03T09:37:29Z

‎System setup

Grinberg: /* What Next? */

2016-07-03T08:48:58Z

‎What Next?

New page

[[Image:CL-SOM-iMX6UL-eval-kit-quick-setup.jpg|800px]]
[[Image:SB_SOM_topview2.jpg|thumb|right|alt=SB-SOM top view|<div align="center">SB-SOM top view</div>]]

== System setup ==
[[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]]
CL-SOM-iMX6 evaluation kit is preloaded with [[CL-SOM-iMX6UL: Yocto Linux|Yocto Linux image for CL-SOM-iMX6]] .
# Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable.
# Connect a USB Keyboard to USB connector '''P6'''.
# Make sure jumpers '''E7''', '''E3''' and '''E1''' are not populated (default state).
# Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector '''P7'''.
# On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
<blockquote>
{{:SB-SOM: serial port parameters table}}
</blockquote>

'''More Details:''' ''[[SB-SOM:_Connectors:_P6|Connector P6]]'', ''[[SB-SOM:_Connectors:_J5|Connector J5]]'', ''[[SB-SOM:_Connectors:_P7|Connector P7]]''.

== Starting the system ==
# Connect the DC 12V power supply adapter (included) to main DC power connector - '''J6'''.
# Follow the messages in your terminal emulator program until you see the linux login prompt.
# Use the credentials below to login.
:* username: root
:* password: 111111
{{note|In case no messages appear in your terminal emulation program, please refer to the detailed [[SB-SOM: HOWTO: USB Console|USB console]] guide.}}

'''More Details:''' ''[[SB-SOM: Connectors: J6 and J8|Connector J6]]''.

== What Next? ==
* [[CL-SOM-iMX6UL:_Yocto_Linux|CL-SOM-iMX6UL Yocto guide]]
* [[CL-SOM-iMX6UL Freescale i.MX6UL Linux|CL-SOM-iMX6UL Linux guide]]

* [http://www.compulab.co.il/products/computer-on-modules/cl-som-imx6ul-freescale-imx6-ultralite-system-on-module/#devres CL-SOM-iMX6UL development resources]

[[Category:SB-SOM]]
[[Category:CL-SOM-iMX6UL]]

@@ Line 30: / Line 30: @@
 * [[CL-SOM-iMX6UL Freescale i.MX6UL Linux|CL-SOM-iMX6UL Linux guide]]
 * [[CL-SOM-iMX6UL:_Evaluation_Kit:_Hardware_Guide|CL-SOM-iMX6UL evaluation kit hardware guide]]
-* [http://www.compulab.co.il/products/computer-on-modules/cl-som-imx6ul-freescale-imx6-ultralite-system-on-module/#devres CL-SOM-iMX6UL development resources]
+* [http://www.compulab.com/products/computer-on-modules/cl-som-imx6ul-freescale-imx6-ultralite-system-on-module/#devres CL-SOM-iMX6UL development resources]
 [[Category:SB-SOM]]
 [[Category:CL-SOM-iMX6UL]]

@@ Line 4: / Line 4: @@
 == System setup ==
 [[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]]
-CL-SOM-iMX6 evaluation kit is preloaded with [[CL-SOM-iMX6UL: Yocto Linux|Yocto Linux image for CL-SOM-iMX6]] <!-- * [[CL-SOM-iMX6UL_Freescale_i.MX6UL_Linux|CL-SOM-iMX6UL Linux guide]] -->.
+CL-SOM-iMX6 evaluation kit is preloaded with [[CL-SOM-iMX6UL Freescale i.MX6UL Yocto Linux|Yocto Linux image for CL-SOM-iMX6UL]].
 # Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable.
 # Connect a USB Keyboard to USB connector '''P6'''.
@@ Line 27: / Line 27: @@
 == What Next? ==
-* [[CL-SOM-iMX6UL:_Yocto_Linux|CL-SOM-iMX6UL Yocto guide]]
+* [[CL-SOM-iMX6UL Freescale i.MX6UL Yocto Linux|CL-SOM-iMX6UL Yocto Linux guide]]
 * [[CL-SOM-iMX6UL Freescale i.MX6UL Linux|CL-SOM-iMX6UL Linux guide]]
 <!--