U-Boot for CM-X300 - Feed

04-Apr-2013

U-Boot 2009.03-cm-x300-6.2 release

- Added progress bar for various commands

- Fixed baudrate issue not being applied on boot

- Fixed LCD shift issue

- Fixed PCB revision detection for revision 1.41 boards

Documentation

- Updated multiple articles to comply with the new U-Boot package

21-Oct-2010

U-Boot 2009.03-cm-x300-6.1 release

- Fixed USB OTG Host port

10-Oct-2010

CM-X300: U-Boot: Firmware Update article updated:

- Added update from MMC/SD Card

05-Oct-2010

CM-X300: U-Boot: LCD and Splash screen article renamed to CM-X300: U-Boot: Custom Features and extended with:

- CPU frequency change

- "silent" option

- boot delay

- custom GPIO setting

- U-Boot advanced power mode

- Alternate Boot Button

20-Sep-2010

U-Boot 2009.03-cm-x300-6 release

- Added MMC/SD card support

- Added Alternative Boot Button handling

- Added custom GPIO setting

- Improved PM and PI2C handling

- Fixed Ethernet detection

14-Apr-2010

U-Boot 2009.03-cm-x300-5 release

- Added CPU frequency change support

- Added "silent" option support

- Improved Ethernet performance

28-Mar-2010

Added CM-X300: U-Boot: Disabled Module Recovery article

04-Mar-2010

Added CM-X300: U-Boot: LCD and Splash screen article

09-Feb-2010

U-Boot 2009.03-cm-x300-4 release

- Added DRAM size detection

- Added LCD and Splash screen support

- Added support for resume from S3/D4/C4 low power mode

- Added I2C and PCA953X GPIO chip driver

- Added support for USB port3 on modules without "W" option

- Disabled debug output to FFUART

- Fixed MFPR setup for PXA310

- Fixed VCC Core voltage configuration

10-Dec-2009

Added CM-X300: U-Boot: Firmware Development article

2-Sep-2009

U-Boot 2009.03-cm-x300-3 release

- Added PXA310 USB support

- Green LED (for CM-X300 revision 1.3 and higher)

27-May-2009

Initial release of U-Boot for CM-X300 documentation

U-Boot 2009.03-cm-x300-2 release supports:

- DA9030 power management chip

- DM9000A Ethernet chip

- PXA300 USB

- Onboard NAND chip

- Green LED (up to CM-X300 revision 1.2)

- System revision and serial number in ATAGS