U-Boot for CM-FX6 - Feed

18-Oct-2015, CM-FX6 U-Boot release

U-Boot 2015.07-cm-fx6-3 release:

- Add support for loading splash image from filesystem formatted mmc, usb, and sata storage

- Add CM-FX6 h/w revision output

- Update code base to 2015.07

- Improve USB keyboard support

- Fixed SD card detect issue for Utilite (SB-FX6m) revision < 1.3

U-Boot 2014.10-cm-fx6-2.2 release:

- Fix NAND read issue

- Fix MMC read issue

- Fix USB OTG host setup on i.MX6D based modules

U-Boot 2014.10-cm-fx6-2.1 release:

- Add HDMI support

- Add HDMI splash screen

- Add framebuffer console

- Add USB keyboard support

U-Boot 2014.04-cm-fx6-1.3 release:

- Add USB and NAND to the default OS boot sequence

- Fix Phison SSD detection

- Fix 1GB DRAM detection on i.MX solo modules

U-Boot 2014.04-cm-fx6-1.2 release:

- Fix USB detection issue

- Fix boot sequence for some first Utilite units

U-Boot 2014.04-cm-fx6-1.1 release:

- Improve SATA disks coverage

- Enable 3Gb/s SATA operation

Initial release of U-Boot for CM-FX6

U-Boot 2014.04-cm-fx6-1 supports:

- MMC/SD Card

- SPI flash

- Ethernet

- NAND flash

- SATA and on-board SSD

- USB host and USB OTG in host mode

- Multiple I2C buses

- Green LED

- Fix NAND detection issue found in older U-Boot versions