View source for CL-SOM-iMX8X NXP i.MX 8X Yocto Linux

{{summary|
This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX8X System-on-Module / Computer-on-Module.

The Yocto Project is an open-source collaboration focused on embedded Linux development.

|cl-som-imx8x_system-on-module.jpg|thumb}}
{{Resources Linux with app notes
|* [[CL-SOM-iMX8X: Evaluation Kit: Getting Started|Getting started with CL-SOM-iMX8X Evaluation Kit]]
* [[CL-SOM-iMX8X: Yocto Linux: Manual Installation: SD card|Yocto Linux installation on SD card (recommended)]]
* [[CL-SOM-iMX8X: Yocto Linux: Installing Yocto images onto the eMMC|Installing Yocto images on CL-SOM-iMX8X eMMC]]
* [[CL-SOM-iMX8X: Yocto Linux: How-To Guide|Yocto Linux how-to guide]]
* [[CL-SOM-iMX8X: Yocto Linux: Package contents|Yocto Linux package contents]]
<!--* [[CL-SOM-iMX8X: Yocto Linux: Known Issues|Known Issues]]-->
|* [[CL-SOM-iMX8X: Yocto Linux: Building images|Building CL-SOM-iMX8X Yocto images]]
*[[Application Notes: Making Changes to Yocto Meta-Layers|Making Changes to Yocto Meta-Layers]]
*[[CL-SOM-iMX8X: Building Linux Kernel|Building CL-SOM-iMX8X Linux Kernel]]
<!-- *[[CL-SOM-iMX8X: Building U-boot image|Building U-boot image]] -->
|*[[Application Notes: Introduction to Yocto development|Introduction to Yocto development]]
*[[Application Notes: Developing with Qt on CompuLab platforms|Developing with Qt on CompuLab platforms]]
*[[Application Notes: eMMC lifetime optimization|Optimizing eMMC lifetime and reliability]]
}}

__NOTOC__

{{ChangelogReleaseNotesRss| content=
===== 08-Dec-2019, CL-SOM-iMX8X Yocto Linux release 1.2 =====
: New HW features:
: - MIPI-DSI display
: - Capacitive touch screen
: - MIPI-CSI camera
: SW Features:
: - U-Boot access to the manufacturing details in the EEPROM
: Documentation:
: - Updated Yocto Linux documentation

===== 21-Aug-2019, CL-SOM-iMX8X Yocto Linux release 1.0 =====
: Initial release of Yocto 2.5 (Sumo) for CL-SOM-iMX8X
: - Based on NXP release L4.14.98-2.0.0_ga
: - Kernel 4.14.98
: - U-Boot 2018.03
: Supported HW features:
: - Basic support for the CL-SOM-iMX8X module
: - Storage: eMMC, SD card, SPI flash
: - Networking: NXP Ethernet Controller (FEC)
: - Display: MIPI-DSI-to-HDMI display interface
: - Wireless: WiFi and Bluetooth (Intel 8265)
: - I/O: PCIe, I2C, CAN, USB2.0 host
: - System: RTC, heartbeat LED
: SW Features:
: - Chromium browser
: - Qt 5
: - CompuLab Deployment Tool
: - CompuLab U-Boot Tool
: - fw_printenv/fw_setenv utilities provide R/W access to U-Boot environment from Linux CLI
: Documentation:
: - Initial Yocto Linux documentation for CL-SOM-iMX8X
}}

[[Category:Linux]]
[[Category:Yocto]]
[[Category:CL-SOM-iMX8X]]